oxygen flow controller Articles

  • What is a Rotary Tube Furnace?

    By definition, a rotary tube furnace is a heat-treating circular furnace, which rotates during heat-treatment. Samples are transported through the furnace in a circular path as they are heated. Rotary tube furnaces generally burn pulverized, solid, gaseous or liquid fuel into its working section, and then the heating gases created flow towards the sample. These furnaces feature a metal drum lined ...


    By Thermcraft Inc

  • White Paper & Video on FTIR multigas analysis

    Gasmet Technologies has published a free White Paper and a video on the simultaneous measurement of multiple gases in a wide variety of applications using FTIR. Both the video and the White Paper can be found here at www.gasmet.com or by visiting the Quantitech stand 62/63 at AQE 2017. ...


    By Gasmet Technologies Oy

  • Nitrosave, nitrogen oxygen control video

    Would you like to control or optimise your nitrogen use? Watch this informative 2 min video to find out how the Nitrosave, nitrogen oxygen control system can solve the issue of waste in nitrogen purged applications. Saving up to 50% of your nitrogen running costs.   Applications include: Curing ovens/vessels and ...


    By Systech Instruments Ltd

  • The optimal dissolved oxygen profile in a nitrifying activated sludge process – comparisons with ammonium feedback control

    Ammonium feedback control is increasingly used to determine the dissolved oxygen (DO) set-point in aerated activated sludge processes for nitrogen removal. This study compares proportional-integral (PI) ammonium feedback control with a DO profile created from a mathematical minimisation of the daily air flow rate. All simulated scenarios are set to reach the same treatment level of ammonium, ...


    By IWA Publishing

  • Influence of denitrification reactor retention time distribution (RTD) on dissolved oxygen control and nitrogen removal efficiency

    Low concentrations of dissolved oxygen (DO) are usually found in biological anoxic pre-denitrification reactors, causing a reduction in nitrogen removal efficiency. Therefore, the reduction of DO in such reactors is fundamental for achieving good nutrient removal. The article shows the results of an experimental study carried out to evaluate the effect of the anoxic reactor hydrodynamic model on ...


    By IWA Publishing

  • How Much Hydrogen (or Oxygen) Will my Electrolyzer Make?

    There are a lot of design considerations that go into an electrolyzer that will dictate what pressure they can operate at, their efficiency, safety, etc.  Today I will let you worry about all the mechanical design and talk a bit about the principles behind the electrolyzer and what this means to you (the designer).  Everything below applies primarily to PEM water electrolysis, but much ...


    By Fuel Cells Etc

  • Minute Flow Tip Video - Mass Flow Versus Volumetric Flow Technology

    When engineers and systems integrators need to measure gas flow rate in an industrial process or scientific research, there are many types of technologies to choose from.  This makes selecting the right gas flow meter a challenge. In addition to technology, engineers must consider many other parameters: price for value, cost of ownership, size of footprint, ...


    By Sierra Instruments, Inc.

  • Case study - Pure oxygen injection into a pipeline. Hagerstown, Maryland

    The Problem: In 2010, the Hagerstown Wastewater Treatment Plant in Maryland incorporated several plant modifications, one of which was the conversion of their disinfection process from the use of ozone to that of ultraviolet (UV). In their previous system, due to the ozone being produced by an oxygen-fed ozone generator, the dissolved oxygen (DO) levels of the effluent being discharged into a ...

  • Simultaneous nitrification and denitrification in activated sludge system under low oxygen concentration

    Simultaneous nitrification and denitrification (SND), which is more economical compared with the traditional method for nitrogen removal, is studied in this paper. In order to find the suitable conditions of this process, a mixed flow activated sludge system under low oxygen concentration is investigated, and some key control parameters are examined for nitrogen removal from synthetic wastewater. ...


    By Springer

  • Testing the oxygen barrier properties of biodegradable packaging materials - Case Study

    The Hemicellulose research group have chosen the Systech Illinois 8001 oxygen permeation analyser to test the barrier properties of polysaccharide films. The University of Helsinki is at the forefront of international research and doctoral education. The quality of the University’s research is reflected in the high number of Centres of Excellence, Academy Professors, ...


    By Systech Instruments Ltd

  • Reduction of ammonia emissions during composting by Uncoupling of oxygen demand and heat removal

    Intensive pig production systems result in high emissions of ammonia, odour and greenhouse-gases (methane and laughing gas) by exhaust ventilation air. Moreover, large amounts of manure (faeces and urine) are produced with insufficient nearby land for applications (Imbeath, 1998). These outputs lead to environmental problems related to ...


    By ORBIT e.V.

  • PureAire Combines Oxygen and CO2 Sensors to provide a Dual Gas Monitor to the Marketplace

    As a recognized leader in O2 safety monitoring, PureAire recently explored the need for an O2 monitor where carbon dioxide is used. There are four key cryogenic gases; nitrogen, helium, argon, and carbon dioxide (CO2), which can create an oxygen deficient atmosphere. Material Safety Data Sheets (MSDS) covering cryogenic gases cite that a cryogenic leak can create an unsafe ...

  • Feed Forward Control

    The Customer The Company is a world leader in the development and production of herbicides, fungicides, and insecticides for the professional agricultural, commercial and consumer turf and ornamental markets. The Process Their manufacturing operations are anchored by large-scale chemical synthesis and their production is achieved through highly ...

  • The Evolution of Plug Flow BNR at Durham AWWTP

    ABSTRACTThis paper describes experiences with plug flow nitrification and plug flow biological nutrient removal (BNR) at Durham Advanced WWTP. The kinetic advantages of the plug flow configuration for nitrification have been recognized for some time; however, limited plug flow BNR process design information was available at the time (1997). The case study began with pilot testing in 1998, during ...

  • Whole-Plant Simulations for Two Pure-Oxygen Activated Sludge Plants in San Francisco

    ABSTRACTThis paper discusses the usage of settling column tests, full-scale stress tests, and whole-plant simulators as planning tools to assess the ultimate treatment plant capacity as well as impacts of process changes to effluent quality, process performance, side streams, and biosolids production rates. These planning tools are described in detail and the results of their implementation are ...

  • University Research Group utilise the Systech 8001 OTR analyser to test the oxygen barrier properties of biodegradable packaging materials

    The University of Helsinki is at the forefront of international research and doctoral education. The quality of the University’s research is reflected in the high number of Centres of Excellence, Academy Professors, Fellows and Researchers. It is also actively involved in the Strategic Centres for Science, Technology and Innovation which enable leading research units and companies to ...


    By Systech Instruments Ltd

  • Control VOC`s in Refinery Wastewater

    Oil and water do not mix, like many of life’s one-liners this statement is basically true but not the whole story. Many hydrocarbon liquids, particularly aromatics, have significant solubilities in water: Benzene 1800 PPMVToluene 470Ethyl Benzene 150Xylenes 150 Petroleum refineries do not like salts in their feedstock since these corrode and foul process equipment. The first refining step is ...


    By AMCEC Inc.

  • Applications guide to mass flow measurement in the pharmaceutical and biotech industries

    Pharmaceutical and biorech companies can fine-tune costs, quality, and emissions if they are equipped with more effective measurement sys- tems. Sierra mass flow meters and controllers provide precise measure- ment and control designed for process industries. They can make any plant more cost-effective in the following ways: Controlling Gas Flow To Fermenters The flow of gases to ...


    By Sierra Instruments, Inc.

  • Differentiation of Mass and Flow Limited Rainfall-Runoff Events for Overland Flow from Small Urban Catchments

    ABSTRACTWater quantity and quality are coupled phenomena in urban rainfall-runoff. These rainfall-runoff quantity and quality relationships have been significantly altered by the built environment and associated anthropogenic activities. Understanding the relationship between quantity and quality of urban overland flow for a given catchment facilitates development of in-situ wet weather control. ...

  • Controlling Bacteria In a Clean Room Environment

    Maintaining the integrity of a cleanroom is a constant battle. The first step to deciding which method, or combination of methods, to employ is to identify the prime sources of contamination. There are three prime sources of contamination through which the integrity of a cleanroom might be breached. First, there is the human element. While many processes might be automated, many situations remain ...


    By GVS Filter Technology

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you