oxygen measurement Articles

  • ppm Dissolved oxygen measurement

    Dissolved oxygen (D.O.) levels are used as a general indicator of water quality. Oxygen is essential to life and vital for countless aquatic forms. D.O. level control is critical in numerous applications ranging from the monitoring of industrial waste water to environmental surveillance. What is Dissolved Oxygen? Dissolved oxygen (D.O.) is the amount of oxygen gas dissolved in a ...


    By IC Controls Ltd.

  • ppb Dissolved oxygen measurement

    Dissolved oxygen (D.O.) measurement is one indicator of water quality because oxygen is a common element contributing to corrosion reactions. This corrosion reaction provides the need for low level D.O. control since dissolved oxygen is responsible for costly replacement of piping and equipment by corrosive attack on metah. what is Dissolved Oxygen? Dissolved axygan (D.O.f is the ...


    By IC Controls Ltd.

  • Measure pH, conductivity, oxygen with HQD

    After just a short time, the HQD digital electrochemical measuring system has already established itself in practice. Both in the laboratory, with standard electrodes, and in the field, with rugged outdoor electrodes.  On the following pages, users describe their experience with the HQD system. Their experiences show that the system covers a wide range of applications, including direct ...


  • Optical measurement of oxygen concentration in water

    The optimisation of oxygen transfer is a key element of control and regulation strategies in municipal and industrial sewage treatment plants. In 2003, HACH LANGE became the first instrument manufacturer to launch the LDO (Luminescent Dissolved Oxygen) method for determining dissolved oxygen in water. The LDO technology is based on pulsed blue light, which brings benefits such as high precision, ...


  • Why it is important to measure Dissolved Oxygen in aeration lanes

    Dissolved Oxygen is a key parameter in the efficient treatment of waste water during the secondary treatment stage; the point at which organic waste is oxidised to form carbon dioxide, water and nitrogen compounds. It is important to act on accurate ...


    By Partech (Electronics) Ltd.

  • Effect of Dissolved Oxygen (and Bubbles) on the Measured Permittivity of Geotextiles

    Measurements are made of the permittivity in a heat set, nonwoven staple filament polypropylene as a function of the dissolved oxygen content (DOC) of the water. Vacuum deairing of the water to a DOC of 5 ppm or below insures that the measured permittivity will not be lowered by oxygen effects. Careful long-term measurements show that the measured permittivity is reduced very significantly if the ...


    By ASTM International

  • Why it is important to measure Dissolved Oxygen in aeration lanes

    Dissolved Oxygen is a key parameter in the efficient treatment of waste water during the secondary treatment stage; the point at which organic waste is oxidised to form carbon dioxide, water and nitrogen compounds. It is important to act on accurate measurements of Dissolved Oxygen in activated sludge plants for the following reasons: To ...


    By Partech (Electronics) Ltd.

  • On Line Measurement of Oxygen: Review and New Developments

    Keywords Oxygen. Paramagnetic, Zirconia, Tunable Diode Lasers Abstract Oxygen is vitally important to the existence of animal life, not only for respiration, but also for the many aspects of the combustion reaction (power generation, vehicular movement, heating) and process control, safety and quality. Continuous measurement techniques are correspondingly ...

  • Measuring oxygen levels in offshore extracted natural gas - Case Study

    Teekay use the EC92DIS portable oxygen analyser on board the Voyageur to measure the oxygen levels in the gas. In March 2013, one of Teekay's largest projects, the Voyageur Spirit FPSO achieved the first oil extraction on the Huntington field in the United Kingdom. The production unit was installed for its new charter contract with E.ON Ruhrgas UK E&P (E.ON) and is expected to last for ...


    By Systech Instruments Ltd

  • Trace Oxygen measuring systems for Reflow and Wave solder machines

    Systech Illinois are the only company that has the option of RACE™ cell technology. What is the RACE™ cell? It is a patented dual cell technology which employs a second fuel cell to protect the first cell from being exposed to high concentrations of O2. What does it do?  ...


    By Systech Instruments Ltd

  • PureAire Oxygen Analyzers & Oxygen Monitors for Nitrogen Generators

    Nitrogen has many uses in industrial applications where oxidation would be undesirable. From carbonizing beer to preserving food, reducing fire danger, and cleaning equipment, nitrogen is a safe, inexpensive gas. For companies that need a steady supply of nitrogen gas, nitrogen generators work well. Learn about the uses of nitrogen generators and why you should use oxygen monitors in ...

  • Measurement of Particle-Bound Reactive Oxygen Species in Rubidoux Aerosols

    The diurnal variations in the concentrations of reactive oxygen species (ROS) in various size fractions were determined for ambient particles in Rubidoux, CA. Sampling of particles was conducted at 3 h intervals using a cascade impactor. The collected particles were reacted with dichlorofluorescin (DCFH), a non-fluorescent probe that fluoresces when oxidized. The factors affecting the diurnal ...


    By Springer

  • Measuring moisture content in medical oxygen cylinders - Case Study

    Since 2003, Medical Gas Solutions Ltd (MGS) based in North Wales have been providing medical gases and devices to the Healthcare Industry nationwide. In 2012 they expanded their product portfolio to include industrial gases. MGS design and manufacture lightweight, high pressure valve, medical oxygen cylinders for the ambulance service, hospitals, medical centres and other emergency services. In ...


    By Systech Instruments Ltd

  • Dissolved oxygen’s effect on ecosystems

    Dissolved oxygen (DO) is a measure of the amount of oxygen dissolved in water. It can be caused by a process of aeration of water flowing through rapids or falls, a byproduct of photosynthesis and the atmosphere. Monitoring DO levels in water may be more important than you think. From dead fish washing up on the shores of Singapore, to historically low levels of brown shrimp, DO is having an ...


    By Aquaread Limited

  • Dissolved Oxygen – the discussion moves on

    Do Dissolved Oxygen Sensors need Cleaning? The re-emergence of Optical Dissolved Oxygen Sensors around 6-7 years ago generated a lively and interesting discussion which revolved around the relative merits of Optical and Galvanic Dissolved Oxygen sensors. We understand that opinions will differ, so in order to accommodate our customers preferences we are pleased to offer our OxyTechw² ...


    By Partech (Electronics) Ltd.

  • Boiler Dissolved Oxygen Control

    DISSOLVED OXYGEN CHEMISTRY Dissolved Oxygen (DO) is a measure of the amount of oxygen, usually thought of as a gas, that is dissolved in a liquid such as water. Oxygen is essential to life and is also the most common element found taking part in corrosion reactions. DO can be thought of as the fuel needed for the corrosion process to proceed. It is the corrosion reactions that necessitate ...


    By IC Controls Ltd.

  • What is Chemical Oxygen Demand (COD)?

    Chemical Oxygen Demand (COD) analysis is a measurement of the oxygen-depletion capacity of a water sample contaminated with organic waste matter. Specifically, it measures the equivalent amount of oxygen required to chemically oxidize organic compounds in water. Why Measure COD? COD is used as a general indicator of water quality and is an integral part of all water quality ...


    By MANTECH

  • Oxygen Transfer in a Biological Aerated Filter

    The City of San Diego (City) operates the Point Loma Wastewater Treatment Plant (PLWTP) which can normally treat up to 240 million gallons per day (MGD) of chemically enhanced primary treated (CEPT) effluent for ocean disposal. The City wanted to understand the performance capabilities of Biological Aerated Filters (BAFs) in treating CEPT effluent to secondary standards. To this end, the City ...

  • Continuous measurement of Process oxygen for Claus sulfur recovery unit (sru) start-ups and shut-downs case study

    During start-up and shut-down, any time a sulfur recovery unit (SRU) transitions from ambient temperature through fuel gas warm up to the introduction of acid gas, measurement of 02 stoichiometry is critical. Historically, operators have manually taken samples using a portable electrochemical type Os analyzer. While giving more or less satisfactory results, the requirement for more stringent ...

  • Dissolved oxygen measurements in aquatic environments: The effects of changing temperature and pressure on three sensor technologies

    Dissolved oxygen (DO) is probably the most important parameter related to water quality and biological habitat in aquatic environments. In situ DO sensors are some of the most valuable tools used by scientists and engineers for the evaluation of water quality in aquatic ecosystems. Presently, we cannot accurately measure DO concentrations under variable temperature and pressure conditions. ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you