packaging film Articles

  • It is time to end food waste

    Food waste is a global, billion-dollar problem. The White Paper ‘It’s time to end food waste’ explores the origins, the reasons and some exciting solutions for the global food waste problem. Supercharged composters, mini-ventilators, smart lipid films are just some of the solutions to reduce the 1.3 billion tons of food that is currently wasted. Scientists and entrepreneurs ...


    By TOMRA Sorting GmbH.

  • Permeation analyser provides validation to packaging film barrier performance - Case Study

    Established in 2013 by bringing together the 5 smaller groups of Exopack US, Britton Group, Paccor, Paragon Flexibles and Kobusch, Coveris is now one of the world’s leading suppliers of high performance flexible and rigid packaging for the consumer goods and food service sector. With more than 8,500 global employees and 60 strategically located facilities, Coveris is dedicated to providing ...


    By Systech Instruments Ltd

  • Permeation analyser provides validation to packaging film barrier performance

    Established in 2013 by bringing together the 5 smaller groups of Exopack US, Britton Group, Paccor, Paragon Flexibles and Kobusch, Coveris is now one of the world’s leading suppliers of high performance flexible and rigid packaging for the consumer goods and food service sector. With more than 8,500 global employees and 60 strategically located facilities, Coveris is dedicated to providing ...


    By Systech Instruments Ltd

  • Permeation testing of flexible food packaging films - Case Study

    FFP Packaging Solutions specialise in high quality printed and plain flexible packaging, heat seal lidding films and films for high temperature/oven use. Offering the food industry innovative flexible packaging solutions, FFP ensure that all the film materials used have been vigorously tested to ensure that the quality of the packaging is stable when used in different environmental conditions ...


    By Systech Instruments Ltd

  • Evaluating water vapour permeation of PLA nanocomposite film for food packaging - Case Study

    The Research Centre at the University of Salerno have chosen the Systech Illinois 7002 to evaluate the permeability of water vapour in the PLA nanocomposite films. The University of Salerno was founded in 1988 and is situated in the village of Fisciano in the Irno Valley, a few miles from Salerno. With its modern campus and state-of-the art facilities, it has become one of the leading ...


    By Systech Instruments Ltd

  • Coveris use the Systech 8001 Oxygen Permeability Analyser to validate the barrier performance of their packaging films

    Coveris manufacture flexible and rigid packaging that adds real value to products such as fresh and frozen food products by optimising its protection, freshness and shelf appeal. With more than 8,500 global employees and 60 strategically located facilities, Coveris is dedicated to providing solutions that enhance the safety, quality and convenience of products we use every day. They use the ...


    By Systech Instruments Ltd

  • Sustainable package design

    Companies have a vast number of different package design options available. But today the important question is how sustainable they are? Should they use paper or plastic? When does it make sense to use material combinations and what are their environmental impacts? Answers to these questions are provided in a Life Cycle Assessment study (LCA) that PE INTERNATIONAL has conducted for ...


    By thinkstep

  • How to Create Less Packaging Waste

    From an environmental point of view, packaging is a necessary evil, but one that can be minimized in a number of ways. Here are a few ideas companies can use to reduce the amount of packaging waste they generate, and in many cases, improve their operations in the process. Corrugated Box Redesign Corrugated shipping containers generally represent the greatest amount of packaging ...

  • Accurate Determination of Film Thickness by Fast-Scanning IR

    Semiconductor components are made primarily from surface-doped substrates of silicon, gallium arsenide, mercury-cadmium telluride, and other highly refractive metalloid materials. Special lenses and mirrors usually have a specific coating to impart some required optical property (anti-glare, UV-blocking, colorcorrection, etc). Polymer films used in packaging and manufacturing are often made to ...


    By Buck Scientific Inc

  • CHEAPER, Greener, Environmentally CONSCIOUS STRETCH FILM

    Find out how new resin formulas are changing the stretch film industry. They allow companies to save money, reduce waste, and be more environmentally conscious. Most stretch film manufacturers and experts predict that hybrid and micron stretch films will soon replace standard 80 gauge stretch films. The new stretch film resin mixtures allow manufactures to reduce production costs, while still ...

  • Patented method for oxygen permeation analysis of food packaging

    The PermMate utilizes an innovative method of oxygen permeation analysis of finished packages - ‘Ambient Oxygen Ingress Rate’ (AOIR). Providing the ability to test the oxygen permeability of packages under different test conditions including how the product ...


    By Systech Instruments Ltd

  • Sorting plant for light packaging material, location: Italia

    Task Automation of an existing manual sorting press line for production of marketable potential recyclables out of the mix of light packagings. Solution Automatical treatment of the light packagings  by auger fillers, ballistic separators, ferrous and non-ferrous and air separators as well as optical identification discharging all troubling materials at the ...


  • Performance characteristics of a Thin-film aluminum oxide humidity sensor - Case Study

    Summary A laboratory study was made of the performance of a miniature-size, thin-film aluminum oxide humidily sensor over a range of ambient temperatures from 0°C to 40°C and encompassing humidities from 40 to 78,000 parts per million by volume (ppm-v). Hysteresis and temperature effects of the sensors were obtained from tests performed at ambient temperatures 40°C, 25°C and ...

  • Testing the barrier performance of metallized polymer films - Case Study

    General Vacuum in Lancashire, now part of the Bobst Group have been designing and building large industrial vacuum roll coaters for use in optical, electrical and general packaging applications since 1996. Aluminium metallized polymer films can be used in packaging applications where there are a number of requirements including barrier protection (WVTR, OTR etc.).  This type of packaging has ...


    By Systech Instruments Ltd

  • Pharmaceutical blister packaging measured using WVTR and OTR instruments - Case Study

    Since 1967 Tekni-Plex, Inc, has provided solutions for innovative packaging and tubing products.  For their clients in the pharmaceutical and medical industries, the company has specialized in the development and manufacture of blister films offering superior barrier against ingress and egress of moisture and oxygen. In 2011 Tekni-Plex set up a Global Technology Center in Holland, Ohio, ...


    By Systech Instruments Ltd

  • Testing the oxygen barrier properties of biodegradable packaging materials - Case Study

    The Hemicellulose research group have chosen the Systech Illinois 8001 oxygen permeation analyser to test the barrier properties of polysaccharide films. The University of Helsinki is at the forefront of international research and doctoral education. The quality of the University’s research is reflected in the high number of Centres of Excellence, Academy Professors, ...


    By Systech Instruments Ltd

  • MEGTEC innovation cuts flexible packaging manufacturer’s energy bills by $10,000 a month

    Saving money on its energy bills turned out to be a lot of hot air for flexible packaging innovator Shields Bag & Printing. As a custom blown film extruder, Shields Bag extrudes, prints and converts film for flexible packaging products used in a wide range of industries. The company produces more than 100 lines of products that are shipped to clients all over the world, from produce bags to ...


    By Babcock & Wilcox MEGTEC LLC

  • Griñó group packaging sorting plant in Lleida, Spain case study

    Leading-edge technology at the Griñó group packaging sorting plant in Lleida, Spain Griñó Ecologic has installed three TITECH autosort 4 sensor-based sorters at its packaging sorting plant in Montoliu de Lleida.The latest-generation equipment at the Montoliu plant is more compact, reliable, power-efficient and accurate. Overview ...


    By TOMRA Sorting GmbH.

  • FFP choose Systech’s oxygen permeation analyser for testing flexible films - Case Study

    FFP Packaging Solutions specialise in high quality printed and plain flexible packaging, heat seal lidding films and films for high temperature/oven use. Offering the food industry innovative flexible packaging solutions, FFP ensure that all the film materials used have been vigorously tested to ensure that the quality of the packaging is stable when used in different environmental conditions ...


    By Systech Instruments Ltd

  • Introduction to Decentralized Packaged Wastewater Treatment (PWWT) Systems - PDH Article

    Learning Objectives After reading this article, you should understand: Functions and processes of a decentralized PWWT system; Design considerations of a PWWT system. Overview "Clean water will be the oil of the 21st Century." The accuracy and magnitude of this statement is resonating worldwide. ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you