painting booth Articles

  • Case Study - Paint Spray Booth

    Process:                Paint Spray Booth                                              ...


    By Kono Kogs, Inc.

  • Case study - Paint booth over spray

    OVERVIEW A major automotive component supplier needed to control the emissions from its paint spray process. The plant emissions had characteristics common to many paint spray plants: high air flow, low volatile organic compound (VOC) concentration and particulate. The company needed an emission control solution that had low operating costs and that could also fit in their limited ...

  • LATEST TECHNOLOGY: Low Cost PAINT BOOTH VOC OXIDIZERS

    SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else:  (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator,  (3) VERY SMALL FOOTPRINT - -  usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring ...


    By Soil-Therm Equipment, Inc.

  • Performance of a Compost-Based Hybrid Bioreactor for the Treatment of Paint Spray Booth Emissions

    ABSTRACT Recently, application of vapor-phase bioreactors to the treatment of volatile organic compounds  (VOCs) from paint spray booths has drawn increased interest.  Contaminated air streams from paint spray booths are characterized by transient loading conditions and chemical mixtures consisting of both hydrophobic (e.g., xylene and toluene) and hydrophilic compounds (e.g., ketones).  The ...


  • LATEST TECHNOLOGY: Low NOx PAINT BOOTH & INDUSTRIAL OXIDIZERS with Heat Recovery

    SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else:  (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator,  (3) VERY SMALL FOOTPRINT - -  usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring ...


    By Soil-Therm Equipment, Inc.

  • LATEST TECHNOLOGY: Small PAINT BOOTH OXIDIZERS with Heat Recovery

    SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else:  (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator,  (3) VERY SMALL FOOTPRINT - -  usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring ...


    By Soil-Therm Equipment, Inc.

  • Automobile Paint

    Problem: A car manufacturing plant were experiencing difficulties in removing painting sludge from their spray booth wastewater. The original vacuum filters had never achieved the performance required for the spray booths, which contained "robotic" spray ...


    By HydroCal Inc.

  • Paint booths, or areas using combustible gases: why a requirement for combustible gas monitor might be necessary

    Paint booths save time and ensure a smooth and professional application of paint in a range of industries, including automotive, aerospace, home decor, furniture, and more. Combustible gases and fluids in the paint booth environment can pose a health hazard if something goes wrong. Explore the hidden dangers of paint booth fluids and gases, and learn how a ...

  • LATEST TECHNOLOGY: Low Fuel Cost PAINT BOOTH & INDUSTRIAL OXIDIZERS with Heat Recovery

    SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else:  (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator,  (3) VERY SMALL FOOTPRINT - -  usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring ...


    By Soil-Therm Equipment, Inc.

  • Spray Painting: GT Motors

     Background GT Motors (GTM) is a small panel beating and spray painting workshop established in 1964, with a current of workforce of four. GTM currently repairs and refinishes approximately 30 cars a month from a largely private and growing customer base. Like many environmentally responsible operators, the firm reuses and recycles as much of the wastes generated in their ...


  • Case study - Paint spray

    Problem A major automotive component supplier needed to control the emissions from its paint spray process. The plant emissions had characteristics common to many paint spray plants: high air flow, low volatile organic compound (VOC) concentration and particulate. The company needed an emission control solution that had low operating costs and that could also fit in their limited space. ...

  • Biofiltration of VOCs for Paint Manufacturing and Coatings Applications

    Biofilters, long used in Europe for odour control because of low maintenance, energy and operating costs have had a difficult time penetrating the US. The energy crisis and the cry for sustainable technologies have created interest in pollution control devices that reduce emissions and are energy efficient. This paper will discuss technical performance, design factors and economics of a ...


  • Paint Stripping Using Plastic Media: Carstrip

     Carstrip Pty Ltd has established a dry process for stripping paint from motor vehicles undergoing panel repairs or restoration. The process uses ground plastic media in a sandblasting-type process to remove the paint from the vehicle without damaging the metal. The process has eliminated the generation of waste sludge associated with chemical stripping processes, and has reduced the labour ...


  • Use of Water Based Paint To Reduce Solvent Emissions: Brisbane Motor Bodies

     Background For the last twelve months Richard Powell has been using water based 'base coat' paints in his smash repair business at Woolloongabba. These paints use water, instead of solvent, as the carrier for the basic paint constituents, and do not release any harmful vapours to the atmosphere. Richard has been in the smash repair business for more than twenty five years and ...


  • Air Emissions from the automobile manufacturing industry: a bio-oxidation pilot study of paint emissions control

    Bio•Reaction Industries (BRI) was contacted by Toyota to assess the abatement potential of an engineered bio-oxidation system (biofilter). The proposed intent of the pilot was to evaluate the effectiveness of biofiltration as available alternative to traditional VOC removal technology on an existing 3 stage wheel paint booth. A pilot unit consisting of a biotrickling filter and a separate ...


  • Air emissions from the automobile manufacturing industry a bio-oxidation pilot study of paint emissions control

    Bio•Reaction Industries (BRI) was contacted by Toyota to assess the abatement potential of an engineered bio-oxidation system (biofilter). The proposed intent of the pilot was to evaluate the effectiveness of biofiltration as available alternative to traditional VOC removal technology on an existing 3 stage wheel paint booth. A pilot unit consisting of a biotrickling filter and a separate ...


  • Replacement of Methylene Chloride Based Paint Stripping Process with Pyrolysis Process: Intrepid Industries

     Intrepid Industries Pty Ltd replaced a methylene chloride based paint stripping process with a pyrolysis process. Significant benefits were realised in the environmental and occupational health and safety areas. Background Intrepid Industries Pty Ltd is principally a powder coating operation, specialising in coating outdoor furniture and lattice work made from die cast ...


  • Optimal vehicle batching and sequencing to reduce energy consumption and atmospheric emissions in automotive paint shops

    Reducing energy consumption and carbon emissions is an important issue to achieve sustainable manufacturing. In automotive assembly plants, the largest amount of energy consumption and atmospheric emissions is in paint shop. Optimising the energy usage to pursue maximum energy savings, and reducing carbon dioxide equivalent emissions are of significant importance in automotive paint shops. ...


    By Inderscience Publishers

  • Treatment of Water-Wash Paintbooth Effluents in the Automotive Industry

    During the coating process of car bodies in water-wash spray booth, around 40% of the sprayed paint does not reach the support; these paint particles sprayed into the air are called “overspray”. By using a dawn-draft positive air pressure coming from the ceiling of the cabin, the polluted air is forced vertically downward toward a grating on the floor under which a constant stream of water is ...

  • Installation of Sanding Area with Downdrought Floor: Bignell Panel Repairs

     Background Bignell Panel Repairs Pty Ltd (BPR) is a medium sized paint and panel shop employing 10 staff. In the paint and panel industry, paint dust has always been a problem. It not only impairs the quality of the paint finish but also causes environmental and health problems. Dust contains heavy metals and toxins which cause respiratory illnesses. It is easily entrained in ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you