part cleaning Articles

  • Monitoring Precision Parts Cleaning

    Abstract Continued miniaturization of high technology products in a wide range of industries has resulted in the increased need for cleaner parts. Continuous particle monitoring utilizing a wide range of sampling techniques is capable of meeting the challenges and complexity of today’s precision cleaning systems. Particle monitoring of cleaning systems has been shown to increase ...


    By Particle Measuring Systems

  • Cleanliness Verification - An Introduction to Parts Cleaning Contamination Measurement

    Abstract Each year the need for stricter cleanliness levels for cleaned parts is discovered. One professional may work in the semiconductor industry, where critical dimensions are shrinking every hour, or so it seems. Another professional may work in the automotive industry, where it is being learned that the initial operation of an engine will determine its life expectancy. In all cases, ...


    By Particle Measuring Systems

  • Aqueous cleaning of manufactured parts/components: establishing the role of solution quality

    Parts cleaning has gradually replaced solvent based cleaning during the manufacturing of parts and in maintenance workshop as a much more sustainable and cost benefit technology. In this study, the performance of aqueous parts cleaning was evaluated using two industrial parts cleaning systems. One system was equipped with a microfilter and oil skimmer to prolong the cleaning solution lifetime and ...


    By Inderscience Publishers

  • Ground Zero for Industrial Parts Cleaning Discharge - Case Study

    PROCECO helps the R.H. Sheppard Co. attain zero waste after parts cleaning. RH Sheppard purchased a PROCECO Eco-Smart MVR (Mechanical Vapor Recompression) evaporator with a goal of doubling their wastewater processing capabilities. Their new system replaces an obsolete and energy-consuming evaporator. The PROCECO Eco-Smart uses a low-energy distillation method that generates a ...


    By Proceco Ltd.

  • Auto mechanics find new way to save the environment and money

    Some mechanics have reported a 50% savings in cleaning time by turning to an ultrasonic parts cleaning machine while taking advantage of an ecologically safe alternative to manual cleaning with toxic chemicals. With today's industrial sized ultrasonic cleaners, the speed of ultrasonic cleaning to remove soils is combined with the capacity to clean multiple parts at once. Let's take a look at some ...

  • Parts Cleanliness Testing for the Medical Device Industry

    Abstract In the medical device industry it is becoming increasingly critical to ensure that parts are clean. Infections or rejections due to inadequate or improper cleaning can result in serious health problems, major litigation, and, in some cases, business failure. While a rigorous cleaning method is important, it is also necessary to quantify that the cleaning method was effective. ...


    By Particle Measuring Systems

  • Washing or Sterilizing Very Small Parts?

    WPI has introduced a series of Micro Fine Mesh Baskets which are ideal for washing or sterilizing very small parts. The series of baskets consists of many sizes from 40 x 40 x 20 mm up to 180 x 130 x 20 mm. The Micro Fine baskets are constructed with micro fine mesh with opening squares of 1.0 mm and wire diameter of 0.5 mm. In addition to the Micro Fine Baskets, WPI also offers a ...

  • From Customization to Standard Feature

    How do our engineers come up with new features for our automated systems? We get ideas from you! Sitting in the lab brainstorming what modifications our customers need for imagined applications is no replacement for the real-world experience the users of our machines gain every day. Many of the ...


    By Comco Inc

  • Parts-Cleaning Oily Wastewater Disposal Costs Reduced by Over 90% with Vacuum Distillation - Case Study

    A global market-leading manufacturer of mechanical fastening systems and precision components needed to reduce wastewater disposal costs. The Italian facility serves diversified end markets, including the automotive, construction supply, electrical/electronics, aerospace and medical components industry. Project Goals: 1) Reclaim and reuse oily wastewater from cleaning tunnels (Dürr ...


    By PRAB, Inc

  • Real-time statistical process control of aqueous cleaning systems through in-situ monitoring

    Abstract Traditional off-line part cleanliness analysis is too slow for use as a process control tool. These tests, traditionally performed in a laboratory on a small number of representative part samples, are extremely time-consuming. Parts are already integrated into finished product before contamination data are available. Any problems identified at this point require product recall ...


    By Particle Measuring Systems

  • Study of Raw Wastewater BOD5 and cBOD5 Relationship Yields Surprising Results

    A study of the relationship of the raw wastewater BOD5:cBOD5 ratio was conducted at three wastewater treatment plants across the United States. Gwinnett County, Georgia; King County, Washington; and Littleton-Englewood, Colorado conducted a 3-month study using side-by-side samplers. The purpose of the study was to determine if cleaning wetted sampler parts routinely affected the ratio. One of the ...

  • Automotive parts manufacturer case study

    Scope The heat-treating operation at this major automotive bearing manufacturer in Georgia involves quenching parts with oil followed by an aqueous cleaning proc-ess. Two cleaning tanks were dumped and re-charged weekly when they became too contaminated to clean parts effectively. The parts were susceptible to staining when the cleaning solution became overly contaminated and the ...


    By Separation Dynamics

  • Trading NOx in the North-east USA

    Controlling ozone raises thorny issues. Daniel Chartier examines the US ‘cap and trade’ approach to the problem. The problem of ozone in the Northeastern US has been a persistent one. Throughout the North-eastern and Mid-Atlantic US the federal National Ambient Air Quality Standard (NAAQS) for ground level ozone is exceeded repeatedly each summer.  Despite attempts to deal with the ozone ...

  • TROLLEY SHOT BLASTING MACHINE

    Are you looking for car type shot blast cleaning machine? Shot blasting parts of different forms and dimensions, castings, forgings, pressed parts, parts and parts from fragile materials, cleaning of the surface, removing of casting sand ...

  • Watch Out For These Germy Household Items

    In this blog post, we will tell you about the benefits of keeping your home clean and which parts of your home, you should focus your attention more on.  The following, is a list of household items that usually have lots of germs on them and you should try to either stop using them or clean them more regularly. Check out this blog for more information:  ...


    By Lake Norman Sewer & Septic

  • Daily maintenance of ice cream machine

    How to maintain the ice cream machine every day? Zhengzhou Shuliy Food Machinery Equipment gives you detailed answers to the daily maintenance steps of the ice cream machine: First, the daily maintenance of the ice cream machine, the cleaning of the fuselage: Consumers need beautiful, clean and hygienic ...


    By Zhengzhou Shuliy Machinery

  • Littleport, Cambridgeshire case study - Old gas tanks leak harmful chemicals into gardens

    FAngry residents in Old School Close in Littleport, near Ely, Cambridgeshire, are facing possible blight as they cannotsell or re-mortgage their homes after it was discovered in 2003 that the land beneath them was contaminated. More than 20 houses were built adjacent to the site of an old gasworks in 1991. Homeowners have been advised not to eat home-grown fruit or vegetables or let their ...


    By Landmark Information Group

  • Long-term effects of low doses of ionising radiation on Chernobyl clean-up workers from Latvia

    Around 6000 inhabitants (20-49 years old in 1986) of Latvia took part in clean-up work in Chernobyl from 1986 till 1991. Most of them were officially documented as recipients of ionising radiation exposure (1-50 cGy). ABM (a 3-aminobenzanthrone derivative developed at the Riga Technical University, Riga, Latvia) has been previously shown to be a potential probe for determining the immune state of ...


    By Inderscience Publishers

  • Steel coating mill saves $450k. with fluid purification program

    The Problem: A leading manufacturer of electro-galvanized and aluminized steel coil products, used as body panels in the automotive industry, was experiencing quality defect issues due to residual surface oil left on the parts after cleaning operation. In order to meet the surface finish specifications of the finished sheet, the mill requires all incoming steel coil stock to be pickled and oiled ...

  • Roller Die’s In-House Tool Room Manages Tooling Maintenance

    One big advantage of working with Roller Die + Forming is access to our in-house tool room. In addition to creating customer tooling locally, we also perform all our tooling maintenance. This means that both scheduled maintenance and unexpected problems are handled quickly by a team already familiar with the tools. Scheduled maintenance is important to make sure roll forming ...


    By Roller Die + Forming

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you