particle monitoring system Articles

  • Guide to Measuring Particles in Oil

    Particle counting is a critical aspect of any machine conditioning program and there are many tools out there available to monitor and track the quantity and severity of the contamination, be it due to external contamination or machine wear. The ...


    By Spectro Scientific

  • Automating oil particle analysis

    Run up to 25 samples at one time The major issue for premature failure in wind turbine gearboxes is bearing failure, which leads to gearbox failure. A wind turbine gearbox will not survive if the oil is ...


    By Spectro Scientific

  • Modelling aerated flows with smoothed particle hydrodynamics

    Modelling aerated flows is a complex application of computational fluid dynamics (CFD) since the interfaces between air and water change rapidly. In this work, the simulation of aerated flows with the smoothed particle hydrodynamics (SPH) method is investigated with a focus towards the application in engineering practice. To prove the accuracy of the method, the processes of air entrainment and ...


    By IWA Publishing

  • Office Printers Emit Ultra fine particle pollution

    We’ve heard quite a bit about particulate matter PM10s and PM2.5s as components of air pollution that we are exposed to on a daily basis. Recent research papers are highlighting the dangers of ultra fine particles (UFPs), which have a diameter of less than 0.1 micrometres (or 100 nanometres). By contrast, the diameters of particulate pollution from PM10s and ...


    By Commercial Air Filtration

  • Simultaneous determination of PM fractions, particle number and particle size distribution in high time resolution applying one and the same optical measurement technique

    Abstract The Fidas fine dust monitoring systems comprise an optical aerosol spectrometer, which is characterized by very good instrument characteristics, and utilize a sophisticated approach to convert the measured information on particle number and particle size into mass concentrations. As monitoring of PM requires reliable and quality-controlled performance of the measuring systems, ...


    By Palas GmbH

  • Automated Oil Particle Analysis Helps Prevent Gearbox Failures

    The major issue for premature failure in wind turbine gearboxes is bearing failure, which leads to gearbox failure. A wind turbine gearbox will not survive if the oil is not clean and especially if the hard ferrous particles are not removed from ...


    By Spectro Scientific

  • The influence of particle size on the first flush strength of urban stormwater runoff

    The presence of a first flush (FF) of suspended solids (SS) in stormwater runoff has important implications for the design of treatment facilities, as does the particle size of solids. Whilst numerous studies have examined the FF behaviour of SS, few have disaggregated FF trends by particle size. In this study, the FF behaviour of SS was investigated in five size ranges, sampled from an urban ...


    By IWA Publishing

  • New laser-based dust emission monitoring system

    Abstract A new generation of continuous particulate matter concentration monitoring instruments is presented, covering a measuring range of 0 to 1000 mg/m3. The laser-based scattered light instrument gives an improved stability as well as excellent resolution in the low range. This enables high concentration measurement as well as especially low emission monitoring down to 0.01 mg/m3 with a ...


    By SIGRIST - PHOTOMETER AG

  • Cleanroom Monitoring and Alarming Using a DAQ and Control System

    CAS DataLoggers recently provided the datalogging solution for a Cleanroom Monitoring and Alarming application in a major hospital which needed a data acquisition and control system to record extensive cleanroom measurement data including pressure, temperature, air humidity and particle counts at various measuring points. Users also needed the system to control the cleanroom alarm horns and ...


    By CAS DATALOGGERS

  • Why monitor dust in the workplace?

    Almost any place of employment can present a potential threat to health and safety from airborne particulates and aerosols. It is important to note, however, that dust hazards are not necessarily visible to the human eye and that the finest particles can represent the greatest threat because of their ability to travel deepest into the lungs. Effective monitoring is therefore key to the ...


    By Ashtead Technology Ltd

  • An analysis of extinction coefficients of particles and water moisture in the stack after flue gas desulfurization at a coal-fired power plant

    Two important factors that affect in-stack opacity—light extinction by emitted particles and that by water moisture after a flue gas desulfurization (FGD) unit—are investigated. The mass light extinction coefficients for particles and water moisture, kp and kw, respectively, were determined using the Lambert-Beer law of opacity with a nonlinear least-squares regression method. The ...

  • How to Monitor Mercury Emissions

    In recent years, mercury levels in the environment and in the food chain have risen substantially mainly due to human activities. As a long-range pollutant it can affect areas located thousands of kilometers away from its original source of emission. It’s no wonder then that the regulatory pressure to monitor mercury emissions grows stronger.  Before diving ...


    By Gasmet Technologies Oy

  • Tools for monitoring distribution system water quality: a study using four parallel pilot systems

    Monitoring and understanding water quality changes within the distribution system is essential to enable effective management to provide good quality water at the customer tap. A recent 2-year study utilised four parallel pilot distribution systems (PDS) and a range of simple tools to assess the impact improving treatment had on the water quality within the distribution system. Particle ...


    By IWA Publishing

  • Groundwater Monitoring Water Solids Removal

    Industrial Waste Water Treatment Success Stories Groundwater Monitoring Colloidal Solids Removal Effective Ground Water Solids Removal The ground ...


    By Integrated Engineers Inc.

  • Groundwater Monitoring Colloidal Solids Removal

    Industrial Waste Water Treatment Success Stories Groundwater Monitoring Colloidal Solids Removal Effective Ground Water Solids Removal The ground ...


    By Integrated Engineers Inc.

  • The ‘ins and outs’ of air quality monitoring

    The National Institute for Health and Care Excellence (NICE) recently issued draft guidance on ‘Air pollution - outdoor air quality and health.’ In the following article Jim Mills, Managing Director of Air Monitors Ltd, explains why there will need to be more funding for monitoring if the mitigation measures mentioned in the guidance are to be implemented effectively. Jim also ...


    By Air Monitors Ltd.

  • Oxygen Monitor for FOUPs in Semiconductors and Cleanrooms

    Over time, the contamination control requirements in the semiconductor industry have become more stringent. Employees now must spend more time adhering to cleaning protocols to preserve the sanitary nature of the environment and comply with regulations. The front-end unified pod (or FOUP) began appearing in semiconductors in the 1990s, serving as a transportation box to safely and ...

  • Radionuclides in wastewater treatment plants: monitoring of Sicilian plants

    Three Sicilian wastewater treatment plants were monitored to assess the occurrence and the behaviour of radionuclides. Two sampling campaigns (screening and long-term) were carried out during which liquid and solid samples have been analysed. It was found that 131I mostly occurred in the samples analysed during the screening campaign (43% of the analysed samples contained 131I). ...


    By IWA Publishing

  • Different technology options for monitoring oil in produced water – inline continuous monitoring and IR analysis

    No offshore facility wants to be caught with a sheen around their platform as that can result in a costly fine for exceeding discharge permit limits for oil. Onboard oil in water analyzers are necessary to ensure the oil/water separation systems are functioning properly before overboard disposal of the produced water. Bench top analyzers have traditionally been used to test oil in water although ...


    By Spectro Scientific

  • Silver Membranes in Monitoring Respirable Crystalline Silica

    Crystalline silica, most commonly found in the form of quartz, is a basic component of the earth; it’s found in soil, sand granite, and other minerals. During many industrial processes, crystalline silica is released as particles that are 100 times smaller than beach sand.1 Due to their size, these mineral particles cannot easily be cleared by human lungs. Instead, they persist in the ...


    By Sterlitech Corporation

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you