particulate matter measurement device Articles

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Sample Handling Strategies for Accurate Lead-In-Soil Measurements in the Field and Laboratory

    ABSTRACT The inhomogenous lead-in-soil matrix can present serious obstacles to accurate sample collection and handling. In typical lead-in-soil measurement, particle size related errors in sampling and sample handling often exceed all other sources of error. The magnitude of error can vary widely depending on the particulate nature of the lead contaminant and the effectiveness of control ...

  • Use of abatement cost curves in developing environmental bubble policy for managing SPM in Jamshedpur region

    This paper evaluates environmental bubble policy using abatement cost curves drawn for different abatement measures in Jamshedpur region. Surveys were conducted to estimate industrial emissions of suspended particulate matter (SPM) from different emitting sources in the region, and the characteristics of the existing and alternative abatement devices for each emitting source. The abatement cost ...


    By Inderscience Publishers

  • Low-mass PM analyzer MEXA-1370PM — Improvement of the Performance for PM Composition Analysis —

    Particulate matter (PM) emitted from engines is currently measured by the filter weight method. The filter weight method passes diluted emission gases through a filter collecting the PM, and post test weighs the mass of the collected PM on a precision balance. However, this method is time consuming, and with decreasing PM emission volumes, improvements in accuracy were needed. So the MEXA-1370PM ...


    By HORIBA Europe GmbH

  • The invisible fine dust

    Air is lifeblood. Daily we inhale approximately 15.000 liter. Still, the air contains invisible pollutants, which vary in its composition and concentration depending on the location. Especially the respirable particles with a diameter of less than 2.5 µm (PM 2.5) were considered to be particularly dangerous. According to a current study conducted by the Max Planck Society, ...

  • Guide for developing a multi-metals, Fence-line monitoring plan for fugitive emissions using x-ray based Monitorsa case study

    Airborne metals and metal compounds are of particular concern to human health. Not only are they included in the United States (U.S.) Environmental Protection Agency’s (EPA) list of 187 hazardous air pollutants (HAPs), they represent 8 of the 33 urban pollutants identified by the EPA as posing the greatest potential health threat in urban areas. This is particularly significant since 80% of ...


    By Cooper Environmental

  • Retrofitting diesel engines: reducing the emissions of our ideal power source

    Over the past several years, Avogadro Environmental has been working with a number of clients to develop proactive environmental programs as part of their EPA Performance Track and ISO 14001 management systems.  Many client companies that are proactively implementing measures to reduce their environmental footprint are looking for ideas.  Diesel engine retrofits for off-road stationary and mobile ...

  • Map Algal Blooms with Satellite Remote Sensing Technology

    The quality of water bodies is a key determinant in the usability of the resource for the purpose required. It is therefore of great importance to managers of hydrologic resources to be able to confidently tell the status of their water resource. One of the major problems in the quality of surface water bodies is the blooming of algae and blue green algae. Algal blooms can result in ecological, ...


    By LG Sonic

  • New boiler MACT and affiliated rules proposed

    EPA proposed three related rules (with final rules expected by December 16, 2010), intended to reduce the emission of hazardous air pollutants (HAPs) from industrial, commercial, and institutional boilers and process heaters as well as commercial and industrial solid waste incinerators. Simultaneously, it also proposed a definition of solid waste that could potentially affect some units currently ...


    By Trinity Consultants

  • Breakthroughs in testing technology as new global player emerges

    Engineers and developers now have a choice of engine testing technologies following the recognition by the United States Federal Register of the BG3 Partial Flow Dilution sampling (PFD) technology developed by Sierra Instruments for engine particulate emissions, R&D and certification. Building on this news, the Monterey, California - based company has also extended its global footprint this ...


    By Sierra Instruments, Inc.

  • Pollution monitoring in Cement Industry

    The rising use of waste based fuels in the cement industry, both for economic and Environmental objectives, combined with the strengthening of air emission regulations around the world is pushing many operators to face a wider list of pollutants to monitor this, with associated costs. The design of appropriate solutions meeting local regulation is the key to maximize the cost benefit of the fuel ...


    By Environnement S.A

  • PC MACT proposal may signal widespread change

    On May 6, 2009, EPA proposed amendments to the National Emission Standards for Hazardous Air Pollutants from the Portland Cement Manufacturing Industry (PC MACT) in response to numerous petitions and court mandates. The proposed revisions present significant challenges to the portland cement industry by establishing a new lower maximum achievable control technology (MACT) floor that would require ...


    By Trinity Consultants

  • Closures of mine a new challenge for Romania

    AbstractThe mining activity is one of the oldest activity in Romania, dating from the year 100 B.C. The gold and silver ores represented one of the riches of our country. In time the economic content of metals diminuend, and the ore mines become non profitable. Due to this situation the best option of the State was the closure and ecological rehabilitation of the mines.The steps for the ...


  • Nature’s Own - Biofiltration process offers promise of (near) energy-free pollution abatement

    A filter could be described as any substance through which liquid is passed to remove suspended impurities. Although a “biofilter” is actually not a filter, “biofiltration” is on the threshold of finding a market as a compliance solution for air pollution regulations after a number of false starts. Biofilters have long been used as a means for reducing objectionable odors in Germany, the ...


  • Facilitating compliance with consent decree requirements using an EMIS

    In late 2008, T3, a division of Trinity Consultants, developed an environmental management information system (EMIS) to manage “near real-time” emissions data at a petroleum refinery. The system is designed to support Consent Decree requirements for compliance demonstrations with air quality regulations at the facility. Functionality delivered includes advanced data gathering, ...


    By Trinity Consultants

  • Exploring Innovative Solutions

    Progress in environmental management relies on innovation. Whether it's novel applications of new technologies, pioneering public policies, or groundbreaking partnerships – innovation leads to advances. Looking toward tomorrow's advances, the theme of A&WMA's ...


  • Pulp and Paper Mills Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Cementing the PC MACT

    On September 9, 2010, the U.S. EPA promulgated the final amendments to the National Emissions Standard for Hazardous Air Pollutants from Portland Cement Manufacturing Industry (40 CFR 63 Subpart LLL), also known as the PC MACT. EPA’s self-proclaimed “historic” rulemaking includes some important implications for cement manufacturers and other sources that may be subject to ...


    By Trinity Consultants

  • Crossflow Membrane Filtration High-Purity Water Systems

    INTRODUCTION As the electronics industry continues to provide us with such products as high resolution television, notebook size portable computers and cars with automatic navigation systems, it becomes necessary to produce semiconductors with finer device geometries to allow for efficient placement of more circuits per a given area. This requires increased control of a semiconductor's material ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you