particulate oxidation catalyst Articles

  • Recuperative oxidizer - Boat engine manufacturer

    Epcon has extensive experience in designing and building Thermal Oxidizers for Engine Cell Testing. The Problem A major Boat Engine manufacturer needed to lower emissions from engine cell testing. All motors, whether automobile or boat, are Pre-Tested for several hours prior to shipping. The emissions from these Engine Cells are mostly Carbon Monoxide and unburned fuel, with ...


    By Epcon Industrial Systems, LP

  • Selected Literature from Johnson Matthey`s Environmental Catalysts and Technologies Division

    SSEC Literature: High Temperature SCR Zeolite Catalyst for NOx Control / SCR Catalyst for NOx Control Stationary Lean Burn Engines / SCR Systems for NOx Control Stationary Lean Burn Engines / Gas Turbine Oxidation Catalyst for the control of CO and VOCs / Oxidation Catalysts for the Control of CO, VOC, HC / BanditoTM - Modular Catalytic Converter for the Control of NOx, CO and THC / Band-ItTM - ...

  • Recuperative Thermal Oxidizers for Coffee Roasting

    Coffee Roasting Company Epcon has extensive experience in designing and building Recuperative Thermal Oxidizers for the Coffee Roasting Industry. The Problem A leader in the Coffee Industry needed equipment to control odor and eliminate VOC's from Coffee Roasting. The company went out seeking the technical solutions and went to several manufacturers to ...


    By Epcon Industrial Systems, LP

  • Case study - Engine cell exhaust: Catalytic oxidizer

    Overview Endurance testing of outboard motors for boats has typically been done in lakes and sometimes on barges. This testing was time consuming, presented logistic problems and removed the testing from the R & D department and the factory. When a company in Oklahoma decided to build their own endurance test cell area, the Environmental Protection Agency required them to control the ...

  • Case study: Regenerative thermal oxidizers for coffee roasting

    Epcon has extensive experience in designing and building Regenerative Thermal Oxidizers (RTO's) for the Coffee Roasting Industry. The Problem A leader in the Coffee Industry needed equipment to control odor and eliminate VOC's from Coffee Roasting. The company went out seeking the technical solutions and went to several manufacturers to locate the best possible technology. ...


    By Epcon Industrial Systems, LP

  • Case study - How to properly maintain and service your oxidizer

    Your air pollution control system represents a significant investment in not only initial capital but also ongoing maintenance and operation. Routine inspections performed by your staff combined with thorough maintenance plans provided by Anguil Environmental Service Technicians will ensure you get the most from your investment over the entire life of the system. Anguil has almost three decades ...

  • Modification of thermal and oxidative properties of biodiesel produced from vegetable oils

    Trans esterification of three vegetable oils, sunflower oil, linseed oil and mixed oils as; sunflower-soyabean and olein were carried out using methanol, and potasium hydroxide as catalyst. The methyl esters of the corresponding oils were separated from the crude glycerol and characterized by physical-chemical methods to evaluate their thermal ...

  • Innovative Solar-Panel Manufacturer Selects Recuperative Catalytic Oxidizer for New Product Line

    Operating Issue A solar-panel manufacturer in California was ready to commercially produce a groundbreaking product that had taken many years to develop. Pollution Systems (PSSI) was initially contacted as a consultant to determine what air pollution control technology was most appropriate for the new product line used in their solar-panel production. PSSI worked closely with the company ...


    By Pollution Systems

  • Medical implant manufacturer succeeds with the QUADRANT SRS Silicone Series Thermal OXidizer - Case study

    Medical Implant Manufacturer Succeeds with Customized Air Pollution Control Equipment Many industries utilize silicone as an ingredient in their manufactured product. Silicone enhances the attributes of the product or helps to improve production characteristics. Whatever the reason may be, users of solvent borne silicone's all face very troubling issues when it comes to the selection of the right ...

  • Reaching Euro VI emissions limits

    The requirements of low and lowest detectable exhaust analysis has prompted Eco Physics to launch a broad range of analyzers for NO/NOx detection. Emissions tuning is one of the targets of the EURO VI regulations as well as US EPA 2010, which are: Reduction of Particulate Matter (PM) and reduction of Nitrogen Oxides (NOx). In the past 15 years – since the first European regulation for exhaust ...


    By ECO PHYSICS INC.

  • Exhaust Gas Treatments for NOx Reduction to Add to Global Warming

    The enforcement of year 2007 stringent emission norm for reduced NOx reduction/oxides of nitrogen gases from the diesel exhaust and the after treatment to reduce them will add to global warming by several fold according to renowned engine combustion kinetics, emission control process expert and inventor -Mr.Srinivasan Gopalakrishnan, Hydrodrive Systems & Controls Pvt. Ltd, India. His invention ...

  • Case study - Bakery ethanol

    Overview A bread and bun bakery was faced with installing air pollution control equipment to control the volatile organic compounds (VOCs) emitted during their baking process. The local regulatory agency requires bakeries that generate over 25 tons of ethanol per year to reduce emissions by 95% by installing control devices on their ovens. The airstream that needed to be treated included ...

  • NOx in Non-Utility Industries - Part II - Control options and monitoring methodology

     This the second in a two-part series. Part I, which appeared in our June 2001 issue focuses on air emission origins of nitrogen oxides (NOx) in non-utility industries. Choice of the NOx control technology is dependent on many factors, including regulatory requirements, technical feasibility, cost and public perception. Figure 1, compiled based on publications [1-5], presents a summary of ...


  • Air Emissions/Off-Gas Treatment

    A number of technologies have been widely applied for removal of VOCs from off-gas streams. However, the application of these technologies to off-gases from site remediation may be quite limited. Biofiltration has been widely applied for VOC destruction in Europe and Japan, but it has only recently been used in the United States. Catalytic and thermal oxidation are widely used for the destruction ...

  • Minimizing Operating Costs in VOC Abatement Equipment

    Untitled Document As governmental regulations of environmental emissions become more restrictive, the average concentration of Volatile Organic Compounds (VOC's) has decreased as more ...

  • A Modelling Approach to the Design Optimization of Catalytic Converters of IC Engines

    ABSTRACT In this paper, a modelling approach to the design optimization of catalytic converters is presented. The first step of the optimization is the model-assisted sizing of catalysts. For ...


    By DCL International Inc.

  • Petroleum Refining Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Case study - Rubber curing emissions

    Overview A rubber curing company was looking for a new, affordable abatement solution to treat their blue haze and low-level Volatile Organic Compounds (VOCs) in order to meet regulatory requirements. The large Electrostatic Precipitator (ESP) in use was extremely expensive to operate and maintain. The company began their search for a system that offered effective opacity control and ...

  • What`s the Best Air Pollution Control Technology for My Process?

    Air pollution control equipment is not something that business owners address by saying, “Let’s do the right thing for the environment and install an oxidizer!” In fact, the scenario is more likely to be “We need to increase productivity (always a good thing!), but that will put us over our annual emissions limits. Do we know what we will need? Where do we start? Who can ...

  • Case study - Rockwood Pigments chooses Beltran System

    Rockwood Pigments, a global manufacturer of pigment products, has chosen a wet electrostatic precipitator (WESP) system engineered by Beltran Technologies, Inc.. to clean process gas streams before entering a sulfuric acid plant at its Easton, Pa., manufacturing facilities. Rockwood is the world's second laraest manufacturer of iron oxide and other inorganic color pigments used by paint and ...


    By Beltran Technologies, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you