pcb-containing goods Articles

  • A clean job for Klinger bottle washing systems - Case Study

    Application: Bottle washing equipment Xylem scope: The Lowara Vogel Series e-SHS stainless steel, LSB and e-NSCS cast iron end suction pumps were the right solution for moving water and corrosive liquids in Klinger’s bottle washing machines. The equipment provided combines high efficiency with flexibility and can easily be mounted in small spaces. ...


    By LOWARA - a Xylem brand

  • Online Chemical Oxygen Demand for Treatment Optimization - Case Study

    A wide variety of products are made in the chemical and pharmaceutical manufacturing industries, that require large volumes of chemicals, materials, and substances that are used throughout process operations. Waste water from these facilities typically include contaminants, toxins, nutrients, and organic content that presents challenges with regards to treatment. A major UK based chemical ...


    By MANTECH

  • What`s Hiding in Your Waste Piles?

    In over 25 years in the grinding and recycling industry, we’ve learned that there’s always more than meets the eye in a pile of waste materials. Whether it’s a pile of pallets or household garbage, there’s some good and some bad hiding under the surface. It's there if you know how to find it. You can find it with the right industry knowledge, the right equipment, ...


    By Rotochopper, Inc.

  • Dealing with white goods

    The Hemlock Knoll Sanitary Landfill, operated by the South West Solid Waste Commission (SWSWC), is the waste management facility for the South Western portion of New Brunswick. This facility, which opened in the fall of 1997, serves approximately 14,000 households. In the past, when the area was serviced by twenty-two old style dumps, the disposal method for most household trash was fairly ...

  • Help wanted: good recyclers!

    Your help is wanted (and needed)! Recycling creates new businesses that haul, process, and broker recovered materials, as well as companies that manufacture and distribute products made with these recycled materials. You can help create these jobs by making sure you’re recycling consistently and correctly. Here are some best recycling practices to be a good recycler: 1. Capture all ...


    By Eco Partners, Inc.

  • “Tank in a Box” is a good neighbor

    As most water districts and municipalities have experienced, every new construction project generates some opposition from people living in proximity to the project. In a recent project located in Westlake Village, CA, some residents have been openly very critical of the 5,000,000 gallon concrete water storage tank under construction. One local resident stated he counted 58 concrete trucks ...


    By Superior Tank Co., Inc.

  • FTSE4 Good Under Fire

    The choice of constituents for the FTSE4Good family of equity indexes has puzzled many managers of socially responsible investment funds. But an early review of the list and a commitment to refine the selection process may placate some of the critics, says Graham Cooper. The composition of the FTSE4Good family of equity indexes – revealed on 10 July – has run into criticism from many fund ...


  • The new Carriage of Dangerous Goods Regulations

    Untitled Document What do they mean for transporters of small loads? The Carriage of Dangerous Goods and Use of ...

  • Amendment dangerous goods safety marks

    This proposed amendment will correct some of the dangerous goods safety mark issues that Amendment 6 brought us. This amendment has been published on Transport Canada’s (TC) website for public input. The consultation period ends October 5, 2009. The proposed regulatory changes consist of: Section 1.39 will now include Part 4 Dangerous Goods Safety Marks as a section that does not apply for a ...


    By The Compliance Center (ICC)

  • What’s Good About Allegro PCB Editor Backdrill Capability? New Capabilities in 17.2!

    The 17.2 Allegro PCB Editor has improved backdrill capabilities. Backdrill data is now stored in the library padstacks and utilized at the design level during the analysis and backdrill generation process. Padstacks which do not have pre-defined backdrill information ...


    By PCB Piezotronics, Inc.

  • Ten Good Reasons To Build Dynamic Models

    Over the last ten years computer technology and network modelling software have developed beyond all recognition, providing the necessary hardware and software tools to assist water distribution engineers in their design and planning work utilising fully dynamic all-mains models. However, many water supply companies still make important decisions based on static models that represent an arbitrary ...


    By Innovyze

  • Being a Good Neighbor With Eco-Friendly Odor Management

    As a result of urban revitalization projects, as well as suburban sprawl and development, industrial and agricultural operations are now becoming surrounded by new residential and commercial neighbors. For industrial facilities that call these neighborhoods home, one of the biggest challenges is completely mitigating any odor that may occur. When it comes to fighting odors, being a good neighbor ...


    By OMI Industries (OMI)

  • Good intentions may result in bad health

    President Obama’s stimulus investments in home energy efficiency may have the unintended consequence of increasing future medical costs. The stimulus bill contains $1500 tax credits for homeowners who install energy efficient doors, windows, and/or insulation. Studies in both the United States and England have shown that these home upgrades can reduce air infiltration by 50% in older homes, and ...


    By Tox Free Inc.

  • Say good-bye to bird pest problems

    Before we say good-bye to bird pests, we should probably say hello to the problems they create. For example, birds can quickly become pests when they eat your fruit, drill holes in your birch trees or eat the fish in your pond. When starlings, grackles, blackbirds and crows roost by the hundreds in trees, they create a serious problem--their droppings can carry any of 60 diseases. Moreover, bird ...


    By Bird-B-Gone, Inc.

  • Repacking goods must be made in a quick and efficient way - Case Study

    At Prime Cargo in Kolding time is an influencing factor, due to tight deadlines from customers around the world, who need goods to be transported, stored and forwarded on time. Prime Cargo is an international forwarding company with headquarters in Kolding, Denmark. With offices and agents all over the world this company is total supplier of transport solutions at sea, on the road and in the air ...


    By Bramidan Balers

  • F.S. repair underscores commitment to quality repair & resale at a good price with Abanaki

    In 1987, experienced salesman Floyd Sitzmann incorporated F.S. Repair, Inc. His goal then remains the same as the Iowa-based company's today: to provide industrial repair and resale quickly and cost-effectively across applications that range from complete machine shop operations to sheet metal and fabrication. 'We continually strive to be the number one customer satisfaction company out there,' ...


    By Abanaki Corporation

  • Good Preparation and Planning Reduces Wastewater Headaches Associated with Production Outages

    Author’s note: The terms mill and plant are used interchangeably in this article to describe an industrial manufacturing unit, such as a Pulp & Paper Mill, Petroleum Refinery, Chemical Processing Plant, Meat & Poultry Processing, etc. Plant (or mill) outages come in two types – scheduled and unplanned. Scheduled outages are generally annual affairs at roughly the same ...

  • Good practice guide on noise exposure and potential health effects

    The Expert Panel on Noise (EPoN) is a working group that supports the European Environment Agency and European Commission with the implementation and development of an effective noise policy for Europe. The group aims to build upon tasks delivered by previous working groups, particularly regarding Directive 2002/49/EC relating to the assessment and management of environmental noise. This good ...

  • Trade sustainability impact assessment on the environmental goods agreement - Case Study

    EXECUTIVE SUMMARY On 24 January 2014 at the World Economic Forum in Davos, the EU, together with 13 other WTO members pledged to launch negotiations to liberalise global trade in environmental goods (EGs). The negotiations are employing the Asia-Pacific Economic Cooperation (APEC) list of environmental goods as a starting point with the intent of expanding it to liberalise a "broad ...


    By OZONATOR Industries Limited

  • Socio-Economic Valuation of the Goods and Services of the Paraná Delta Wetland

    Environmental problems can be analysed from different complementary points of view, from the perspectives of both the exact and natural sciences and the social sciences. From an economic point of view, one issue that often receives attention is the resource-allocation decisions that are taken by people, since these are what result in nature being cared for or damaged. In order to make the ...


    By Wetlands International

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you