pe pipe Articles

  • Pioneering Primer from Plastics Pipe Institute

    With administrative offices located in Dallas, Texas, The Plastics Pipe Institute Inc. (PPI) is the major trade association representing all segments of the plastics piping industry. PPI members share a common interest in broadening awareness and creating opportunities that expand market share and extend the use of plastics pipe in all its many applications. As an association, PPI focuses ...


    By TRIC Tools Inc.

  • Size reduction of loose film, hollow containers, barrels, crates, PVC pipes (thin-walled PE / PP pipes), profile, ...

    NEUE HERBOLD granulators (LM series) are specially designed for the size reduction of voluminous, thin walled materials. Typical applications are - the size reduction of loose film ( in-line edge trims) - the size reduction of hollow containers - the size reduction of barrels - the size reduction of crates - the size reduction of PVC pipe (thin-walled PE/PP ...

  • Two Detector Solution to Analyzing Sulfur

    Sulfur compounds are reactive, corrosive to pipes, and destructive to catalysts in petroleum refineries. Sulfur emission are strictly regulated globally. When released into the atmosphere sulfur dioxide converts to sulfuric acid resulting in adverse effects on human health and the environment. Sulfur detection is found useful in many other industries; therefore, detection of sulfur compounds in ...


    By Restek Corporation

  • Size reduction of loose film, hollow containers, barrels, crates, PVC pipes (thin-walled PE / PP pipes), profile,

    Neue Herbold LM series granulators are specially designed for the size reduction of voluminous, thin walled materials. Typical applications are - the size reduction of loose film ( in-line edge trims) - the size reduction of hollow containers - the size reduction of barrels - the size reduction of crates - the size reduction of PVC pipe (thin-walled PE/PP pipe) - the size ...

  • PE-Recycling at its very best

    The Pipelife Group is a leading manufacturer of plastic pipe systems in Europe. The company's flagship products are created at its Stathelle facility in Norway, where PE pipeline pipes hundreds of meters long and up to 2.50 meters in diameter are produced for use throughout the world. Since the beginning of this year, production waste that accumulates has been shredded and recycled with a ...


    By WEIMA

  • PE-Recycling at its very best case study

    The Pipelife Group is a leading manufacturer of plastic pipe systems in Europe. The company's flagship products are created at its Stathelle facility in Norway, where PE pipeline pipes hundreds of meters long and up to 2.50 meters in diameter are produced for use throughout the world. Since the beginning of this year, production waste that accumulates has been shredded and recycled with a ...


    By WEIMA

  • Influence factors of organic compounds leaching from PE pipes and the potential toxic effects on E. coli and rat C6 glioma cell

    Water quality safety is always a hot topic. Recently there has been a great increase in the use of polyethylene (PE) pipes in drinking water distribution systems in China. Some organics can leach from PE pipes into drinking water, which is undoubtedly harmful for consumers. In this study, potential organics leaching from two Chinese brands of PE pipe were investigated in order to determine the ...


    By IWA Publishing

  • pipe fitting mold, irrigation piping system, irrigate fitting mould

    China pipe fitting mold, pipe fitting mould, mould, mold, moulds, molds, tool, plastic mould, plastic mold, injection mould, injection mold, pipe mould, pipe mold, fitting mould, fitting mold, PVC mold, PVC mould, PVC pipe mold, PVC pipe mould, PVC fitting mould, PVC fitting mold, PVC pipe fitting mold, PVC pipe fitting mould, PVC collapsible core, PVC ...


    By Focare Mould Co.,Ltd.

  • Radius Systems’ bespoke engineered PE Systems bring cost savings and environmental benefits to water customers

    Radius Systems are currently supplying innovative pipeline solutions for two large diameter water projects: a new hydro electricity scheme in Gerlan, North Wales and the rehabilitation of a large diameter pipeline in the Severn Trent Water area. Working together with the Derwent Hydro project team to develop an optimised system for the new hydro electricity pipeline in Gerlan, Radius Systems are ...


    By Water Active Ltd

  • Greenwood township pipe manufacturer expands

    Greenwood Township - Increased demand - particularly from the oil and gas industry - has resulted in an $8 million expansion at a Crawford County pipe manufacturing plant. Los Angeles-based JM Eagle, a maker of plastic pipe that’s used by the utilities, oil and gas and agricultural industries, Thursday celebrated completion of the project at its Greenwood Township pipe manufacturing ...


    By JM Eagle

  • Plugging `hot` pipes in extreme environments

    Some of the world's most intricate infrastructure is found in power plants, chemical plants, refineries, and other factories that use and combine industrial chemicals. The piping for fuel, chemical transport, water supply, and cooling needs is typically very complex and subject to high temperatures and pressures. And since plants are harsh environments, it's a given that piping needs regular ...


    By Petersen Products Company

  • Organic compounds migrating from plastic pipes into water

    Case studies were carried out to identify potential chemical contaminants migrating to drinking water from polyvinyl chloride (PVC) or polyethylene (PE) pipes, available on the Polish market. Analyses were carried out by gas chromatography (GC) coupled with mass spectrometry (MS). Analysis of organotin compounds in water in contact with PVC pipes from different manufacturers found variability: ...


    By IWA Publishing

  • Shredder for solid and thick-walled profiles and pipes

    NEUE HERBOLD Maschinen- und Anlagenbau GmbH, Sinsheim, (www.neue-herbold.com), extends their machinery range by a new 4-shaft shredder with force feeding system. The 4-shaft shredder type HZR 1300/4 is able to size-reduce solid chunks and start-up lumps, as well as thick-walled profiles and pipes up to a diameter of 1200 mm x 1200 mm and up to a length of 6000 mm. The size ...

  • The NEW ELiTE 5TD/CD2 vacuum pipe lifter

    Lifting world safety levels for vacuum pipe lifters higher than ever before, the new ELiTE 5TD/CD2 for PE and steel pipe demonstrates new state-of-the-art environmental and safety elements already praised and welcomed globally.      ...


    By Schoenbeck GmbH & Co. KG

  • Stormwater and Spill Management at an Iron Pipe Foundry in Texas

    ABSTRACTLarge industrial sites have had permits for storm water discharges under the NPDES program of the Clean Water Act since the mid to late 80’s. Recent emphasis has been placed on regulated facilities to prepare and implement Spill Prevention, Control and Countermeasure (SPCC) plans under the Oil Pollution Prevention Act (40 CFR 112). A large iron pipe foundry in Texas has several storm ...

  • Effects of pipe materials on biofouling under controlled hydrodynamic conditions

    Experiments were carried out to investigate pipe material impacts on biofouling, at high effluent concentration levels and under controlled hydrodynamic conditions. Two velocities (0.4 and 0.8 m s−1) were used to monitor biofilm growth on polyethylene (PE) and polyvinylchloride (PVC) pipe walls, respectively. These conditions were established based on wastewater irrigation practices. A ...


    By IWA Publishing

  • Granulators for Size reduction of pipes up to 6 meter (20 ft.) length

    Neue Herbold SR series granulators are designed and manufactured for the size reduction of full length profiles and pipes eliminating the need to pre-cut the material into shorter lengths. The 6000 mm (20ft.) profiles or pipes are fed horizontally into the granulator. The SR series granulators are used for applications ranging from profiles to extremely thick walled PVC, PP and PE pipes. The SR ...

  • Small Diameter Pipe Wipe Sampling for PCBs: Technology Review and Status of EPA Approval

    ABSTRACT The Toxic Substances Control Act (TSCA) regulations governing management of polychlorinated biphenyls (PCBs) in the electric and gas industry include a series of options for abandoning pipe in place and managing pipe removed for disposal. The management options available to owners are different and, in some respects, more stringent for pipe that is less than or equal to 4 inches in ...


    By Weston Solutions, Inc

  • Process to Estimate Sanitary Sewer Pipe Remaining Life Provides MWWSSB Remedial Decision Information

    ABSTRACTA condition assessment study for the Water Works and Sanitary Sewer Board of the City of Montgomery’s (MWWSSB’s) West Catoma Interceptor (WCI) was conducted in 1998 and 2003. The WCI was evaluated in 1998 using core sampling, closed-circuit television, and manhole (MH) inspections. Approximately 193 MHs and 65,000 linear feet (LF) of pipe were inspected. A subsequent study conducted in ...

  • Multi-sensor inspection robot shows benefits of pipe penetrating radar - Case Study

    Pipe penetrating radar (PPR), the in-pipe application of ground penetrating radar (GPR) is one of the most promising quantitative pipe condition assessment technologies to emerge in recent years. With most of the underground pipe infrastructure reaching the end of their design life there is a need to provide measurable data in order to establish the extent of rehabilitation required or the timing ...


    By SewerVUE

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you