peristaltic pump manufacturer Articles

  • Industrial Peristaltic Pumps reduce the cost of ownership for paper and packaging manufacturer

    Challenge A leading paper and packaging manufacturer in Australia was using Air-Operated Double Diaphragm (AODD) pumps to deliver 4-colour ink to its printers. The on-site AODD pumps were using considerable amounts of compressed air and required constant maintenance due to the wearable parts (seals and valves). This was resulting in unacceptable long downtimes and high cost: for repair and ...

  • Peristaltic Pumping in Dairy CIP System

    The Challenge One of the largest UK manufacturers of fresh dairy products for the food industry was using air diaphragm pumps to dose peracetic acid into the final rinse water of both raw and finished CIP (Clean-in-place) routines. CIP (Cleaning-in-place) is a critical hygiene process that helps to maintain the hygienic condition of the process line without the need for ...

  • Peristaltic pumping in dairy CIP system

    Challenge One of the largest UK manufacturers of fresh dairy products for the food industry was using air diaphragm pumps to dose peracetic acid into the final rinse water of both raw and finished CIP (Clean-in-place) routines. CIP (Cleaning-in-place) is a critical hygiene process that helps to maintain the hygienic condition of the process line without the need for ...

  • Peristaltic pumps for moving filtration water

    The Eversburg sewage treatment plant is designed to serve 250,000 population equivalents and is one of three plants operated by the city of Osnabrück in northern Germany. But in 2005, its actual load was closer to 309,000 population equivalents (COD 80 mg/l), pushing the nitrogen input level above the plant's capabilities. To deal with this situation, engineer Peter Sikora organized a team ...


    By ALLWEILER GmbH

  • Peristaltic Pumping in Dairy CIP System - Case Study

    Challenge One of the largest UK manufacturers of fresh dairy products for the food industry was using air diaphragm pumps to dose peracetic acid into the final rinse water of both raw and finished CIP (Clean-in-place) routines.  CIP (Cleaning-in-place) is a critical hygiene process that helps to maintain the hygienic condition of the process line without the need for ...

  • Recycling of Cars Made Green and Cleaner with Verderflex Peristaltic Pumps

    At the end of its’ life, a car yields on average, 140 kilos of shredder waste: 26 kg of metals, 69 kg of plastics, 11 kg of minerals and 24 kg of fibres. In Tiel, Netherlands, a Post Shredder Treatment plant (PST) was built in 2011, for the recycling of cars. The PST plant is one of the two plants in Europe that are able to recycle to approximately 95% of the waste materials. ...

  • Peristaltic Pumps - A lot more than just heavy duty

    By design, the peristaltic pump is ideal for the dependable handling of abrasive, corrosive, viscous, high density and high solid content fluids. It thrives in those applications where other types of pump fail. Water and waste water industries, mining and chemical processing are all prime markets for this workhorse. But being equal to the tough demands of these applications is far from its only ...

  • Blue-White’s FLEX-PRO A4 Peristaltic Pump Emulates the Success of the FLEX-PRO A3

               FLEX-PRO A4 Case Study Facts Plant: Jones ferry WTP  -  Chapel Hill, NC Plant Operator: DM Objective:  Switch out the diaphragm pump to a peristaltic pump to create a smooth, consistent flow ...


  • Blue-White’s “Flex-Pro” Peristaltic Pumps in Partnership to “Save Water and Protect the Environment”

    Over the years, the Environmental Protection Agency (EPA) has offered voluntary partnership programs to address a wide variety of environmental issues by working collaboratively with companies, organizations, and communities.  There are now more than 13,000 firms and other organizations participating in EPA Partnership Programs according to the EPA website.   One of the more highly ...


  • Sioux Falls, Verder Pumps

    The Sioux Falls Water Purification Plant in South Dakota USA, had always relied on gravity to feed slaked lime slurry to their softening basins. In 2009, the staff decided to give gravity a helping hand by trialing a pump to move the slurry more effectively. Lime slurry is a dense product to transfer with a high solid content of up to 35%. Due to the slurry’s abrasive nature which causes ...

  • ISCR-Enhanced Bioremediation Accelerates Groundwater Cleanup at Active Manufacturing Facility

    In the winter of 2008, full-scale in situ chemical reduction (ISCR) was implemented as a removal action at the Siltronic Corporation site in Portland, OR, to treat a source area contaminated by releases of TCE. The source area was considered to be the portion of the site with concentrations of TCE in groundwater greater than 11,000 µg/L, suggesting the ...


  • Future Proofing and Pumping Technology

    Untitled Document Now that the dust of the AMP 4 round has settled, the UK 's water and sewerage companies are underway with their plans to maintain, upgrade and develop their asset base over ...

  • Picking the Perfect Pump

    By John Amundsen, District Manager The Gorman–Rupp Company Pumps and pumping systems are like unsung heroes of modern society – quickly and quietly transporting vital water supplies, chemicals and waste to and from locations, which rely upon their consistent, reliable operation. In fact, pumps and pumping systems are one of those entities that aren't ...


    By Gorman-Rupp Co.

  • The Alternative to Pump and Treat

    Sometimes, an important technological advance begins with a small step – back! Such is the case with remediation of hydrocarbons from groundwater utilizing existing recovery and monitoring wells. For the past few years, state government has based decisions on the amount of clean up that they require by the risk posed to the environment. Risk Based Corrective Action, commonly called 'Rebecca' ...


    By Abanaki Corporation

  • Qdos metering pumps selected by Russian automotive plant

    After a comprehensive evaluation and trial period, the Russian plant of steel wheel manufacturer, Mefro Wheels, has opted to use the latest Qdos 30 metering pumps from Watson-Marlow Fluid Technology Group at its facility in Togliatti. Selected ahead of diaphragm metering pumps, the Qdos 30 pumps have been fully integrated into a complex process control system at the plant’s ...

  • Watson-Marlow OEM pumps help meet rising demand for chlorine monitors

    A specialist manufacturer of water quality measurement and monitoring systems is using peristaltic pump technology from Watson-Marlow Fluid Technology Group for use in chlorine monitoring equipment after similar pumps were found less reliable. With customers that include water, industrial and pharmaceutical companies, Analytical Technology Inc (ATI) designs and manufactures its products in ...

  • Strengthening the Weakest Link

    A leading international wastewater instrumentation manufacturer is now using peristaltic pumps from Verderflex as part of the wastewater sampler systems it manufactures. The pumps provide reliable and accurate performance which helps the Hydrocell sampler systems produced by Halifax-based Smart Storm to measure the volume and toxicity of wastewater effluent. As a leading provider of water ...


    By Modern Pumping Today

  • Free-Product Recovery Methods and Issues

    During my 33 years in the environmental field, I have been involved in a lot of sites with free product.  In the 1980’s light non-aqueous phase liquids (LNAPL) such as gasoline were removed by the following methods: Bailing with a hand bailer from a well Pumping with a 2 pump system (depression pump and product pump) Pumping with a total fluids pump and separating ...


    By Enviro-Equipment, Inc.

  • Recovery of Acrylic Latex from Wastewater: BASF Australia

     BASF Australia is saving $120,000 per year after installing a $40,000 pump that enabled them to recover valuable acrylic latex previously flushed to effluent when equipment was washed. They are also saving on water costs and thinking about cleaner production led the company to improved scheduling which boosted productivity. Background Based in Victoria, BASF Australia ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you