personal dosimeter Articles

  • Controlling Exposure to Noise at Work with Personal Noise Dosimeters

    Which method is best to monitor noise: sound level meter or noise dosimeter? Controlling exposure to noise at work with noise dosimeters Our work environment has been transformed since the 1970’s with the introduction of new machinery and technical equipment designed to improve and increase general productivity. This has revolutionalised the way we operate ...


    By Pulsar Instruments plc

  • Calibration and characterisation of extremity dosimeters

    The increasing use of radiation in the medical field is providing great advances in health improvement. However, these techniques can generate an increase in the number of professionals exposed to radiation. The Brazilian authorities (Brazilian Nuclear Energy Commission ? CNEN) have imposed the monitoring of specific body parts of professionals. One of these obligations is the monitoring of the ...


    By Inderscience Publishers

  • Inno-badge – an electronic dosimeter badge for continuous recording of a worker`s exposure to Phosgene gas

    Untitled Document Phosgene, also known as Carbonyl Chloride, is a widely used but highly toxic substance. At room temperature Phosgene gas is nearly colourless, and at low concentrations ...


    By Baum Publications Ltd.

  • Casella intrinsically safe TUFF personal air sampling pump and dBadge sound level meter are a hit down under with Australian department of defence

    Following a competitive tender process, the Australian Department of Defence has taken delivery of 180 TUFF personal air sampling pumps and 180 CEL-350 dBadge personal noise dosimeters from Casella CEL (www.casellameasurement.com; 01234 844100), leading global specialist in industrial hygiene and occupational health monitoring equipment. Ronald Azar, ...


    By Casella

  • An Industrial Noise Map is Basic to Hearing Conservation

    An Industrial Noise Map Is Basic to Hearing Conservation In the U.S., OSHA has set regulations on worker noise exposure. The usual measurement method is to use a portable noise dosimeter attached to a worker that measures noise exposure as the person moves about the work area. However, this does nothing to identify the source and location of the noise. When conducing a noise survey, a noise ...

  • Development and production of holders for extremity detectors

    The objective of this paper was to develop and produce holders for thermoluminescent detectors for use in interventionist radiology and nuclear medicine. To obtain the value of Dose Equivalent for Extremities, a dosimetry of extremities was done. The holders must have characteristics which are adequate for their intended use. The detector element used in the holders was the LiF:Mg,Ti (TLD-100) ...


    By Inderscience Publishers

  • Noise Monitors and Meters

    Sound level meters Description and ApplicationsThe sound level meter is a lightweight instrument for the measurement of sound pressure level (SPL) in decibels. All ANSI-approved meters meet minimum requirements that include an A-weighted network, a slow-response meter characteristic, and a fully graduated scale with measurements ranging from 80 to 130 dBA. The Type II meter is most frequently ...

  • Noise Measurement

    Definitions Threshold and criterion levels The threshold level is the A-weighted sound level at which a personal noise dosimeter begins to integrate noise into a measured exposure. For example, if the threshold level on a sound level meter is set at 80 decibels (dB), it will capture and integrate into the computation of dose all noise in the employee's hearing zone that equals or exceeds 80 dB. ...


  • Thermoluminescence studies of nanoparticle and bulk NaMgF
    3
    :Mn

    Thermoluminescence and photoluminescence are observed in nanoparticle and bulk NaMgF3:Mn2+ samples. The activation energies for the two main peaks in the TL data are similar for nanoparticle and bulk samples and they are nearly independent of Mn2+ concentration. The similar trap depths suggest that ...


    By Inderscience Publishers

  • Physical dosimetry system in radiation accidents

    We experience various types of radiation accidents. When a radiation accident happens, one of the important aspects that we have to consider is the radiation dose to the victims of the accident. To judge the health effects due to radiation exposure, it is necessary to make a dose assessment. There is a variety of dose assessment methods, of two types: biological dosimetry and physical dosimetry. ...


    By Inderscience Publishers

  • Low-dose monitoring for occupational exposure and the influence of measurement accuracy

    This paper presents the evolution of individual radiation doses received by occupationally exposed workers. The individual doses accumulated over the period 2000-2007 correlated to nuclear laboratory and radiation source (gamma, X-rays) types are in the low radiation range. Dose equivalent Hp(10) was measured by a film dosimeter system; the influence of the measurement accuracy on the results was ...


    By Inderscience Publishers

  • Cirrus Research – Noise Measurement Pioneers for Over 45 Years [Video]

    Since 1970, Cirrus’ mission has been to make monitoring noise simple. More than 45 years later, we thought it was time to look back at our story so far and see what we have achieved. Join us by watching our video, which explores our history and what makes us the noise measurement pioneers that we are today. Cirrus Research ...


    By Cirrus Research plc

  • Evaluation of occupational radiation exposure of cardiologists in interventional radiography in Mashhad CATHLABs

    Several studies have revealed that interventional radiography procedures performed in cardiology departments are high dose techniques. In this study, effective dose of cardiologists working in hospitals Catheterisation Laboratories (CATHLABs) in Mashhad city have been measured during Coronary Angiography (CA) and Percutaneous Transluminal Coronary Angioplasty (PTCA) procedures. In order to ...


    By Inderscience Publishers

  • The evaluation of the dose equivalent to the people accompanying patients in diagnostic radiology using the MCNP4C Monte Carlo code and TL dosimetry

    The general purpose Monte Carlo N-Particle Radiation Transport Computer Code (MCNP4C) was used to calculate the equivalent dose to the person or people accompanying patients who have been exposed to radiation that was scattered from the patient. To do the calculations, two homogeneous water phantoms were used to simulate the patient and the accompanying person. Finally, in the case of source ...


    By Inderscience Publishers

  • In-depth workplace noise risk assessments

    Don’t miss a thing with a custom-made noise measurement kit Pulsar Safety Professional System: the-all-in one solution to noise measurement Pulsar Instruments’ Safety Professional noise measurement system offer Safety, Health, Environmental and Quality (SHEQ) experts a custom-made solution for resolving their complex workplace noise risk ...


    By Pulsar Instruments plc

  • doseBadge Builds up a Head of Steam in York

    Here’s the latest case study from Cirrus Research, featuring the world-famous National Railway Museum. See how the doseBadge Noise Dosimeter helps Anna Kavanagh check that her teams are not exceeding their daily noise exposure limits. The Client: The Science Museum Group The Sites: National Railway Museum, York The Issue: Noise ...


    By Cirrus Research plc

  • Optimus and doseBadge Adapt to New Challenge - Case Study

    Established in 1934, Lindapter International is the world’s innovator of steelwork clamping systems, eliminating the requirement to drill or weld steel.  The company designs and manufactures specialist products for connecting structural steel sections together and  has more than 85 years’ experience in its field. The company’s success is the result of its dedication ...


    By Cirrus Research plc

  • Pump up the volume

    On April 6 the Control of Noise at Work Regulations 2005 will come into effect for any licensed premises or venue offering amplified music entertainment. Tim Turney, Product Manager with Casella CEL which manufactures noise measuring and dose meter technology takes a quiet look at the noisiest industry in town.When the smoking ban came into effect last June many clubs and pubs held a ‘farewell to ...


    By Casella

  • How to capture noise exposure levels of staff with unpredictable work patterns?

    Pulsar Instruments has made assessing and capturing the true noise exposure of workers in a range of settings simple with its innovative noise doseBadge: Model 22. This revolutionary personal noise dosimeter is a self-contained device ...


    By Pulsar Instruments plc

  • Workplace Monitoring: Who, What, When, Why, How?

    In my previous articles in this series for SHP readers, I have focussed on the need for current attitudes to general health and safety processes to change and emphasised the importance of regular monitoring. The best way to combat those ‘hidden killers’ and protect our workforces is to increase awareness of the benefits of regular monitoring and detection.  Employees then need to ...


    By Casella

  • Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you