personal protective equipment manufacturer Articles

  • Personal protective equipment against nanoparticles

    Nanomaterials manufacture and use are in full expansion. With them comes an increasing risk for human health, especially at the workplace. Indeed, the early signs of potential toxicity associated with nanotechnologies are piling up. Even if they must be considered as a last resource in a traditional occupational Health & Safety approach, personal protective equipment (PPE) against nanoparticles ...


    By Inderscience Publishers

  • WSSA Pesticide Stewardship Series: Always Be Diligent Concerning Personal Protective Equipment

    This month pesticide safety educators, health professionals and other experts from around the U.S. will explore how to motivate pesticide handlers to use best practices concerning personal protective equipment (PPE). The discussion is part of a Pesticide PPE Seminar Series sponsored by the National Institute for Occupational Safety and Health (NIOSH). PPE includes apparel and devices worn to ...


    By PRWeb

  • Additive Manufacturing 3D Printing

    3D printing is officially skyrocketing, with industrial applications in medical, biotech, aerospace, defense, and consumer electronics industries growing daily. At the heart of this acceleration is the additive manufacturing or AM process, which allows for easy printing from computer-aided design templates. As this new technology reaches its tipping point, review what the growth ...

  • Assess your Needs for Foot Protection

    FOOT PROTECTION - Assess your needs to see if steel toe overshoes are the right safety option In many industrial settings, when it comes to foot protection, oftentimes only toe protection is required. This is where the steel toe overshoe can be a safe and cost-effective choice. However, because the safety toe overshoe is not eligible for certification by the American Society for Testing and ...


    By Safetytoes International Inc

  • How to Evolve Safety from Protection to Prevention to Prediction

    I’m in the market to buy a new car. My shopping experience thus far has led me to be absolutely amazed by how much has changed in the automobile landscape in just a few years. The vehicle I’m replacing is only 6 years old, but in terms of technology and capability it already feels like an antique. One observation that stands out is the amazing pace of change in car safety. ...


    By Intelex Technologies Inc.

  • Industrial hygiene assessment of a large chemical manufacturing facility – Case Study

    Challenge: Antea®Group was contracted by a large international chemical manufacturing organization to provide a plant-wide industrial hygiene assessment of chemical and noise exposures within their facility. The overall objective of the project was to evaluate worker exposures, compare results as to compliance with applicable regulations and guidelines, and to provide ...


    By Antea Group - USA

  • Additive Manufacturing 3D Printing: The Growth Progress and Need for Safety Monitors

    Additive Manufacturing 3D Printing: The Growth Progress and Need for Safety Monitors 3D printing is officially skyrocketing, with industrial applications in medical, biotech, aerospace, defense, and consumer electronics industries growing daily. At the heart of this acceleration is the additive manufacturing or AM process, which allows for easy printing from computer-aided ...

  • Global aerospace manufacturer cuts material-approval time by 75%

    Automating workflows around today’s detailed materials data gets planes off the ground quicker, according to Actio. The aerospace industry is known for inventing, driving, and implementing advanced technology to solve complex engineering problems. Processes are implemented throughout design and manufacturing to ensure that chemicals, parts, and systems: comply with design ...


    By Actio Corporation

  • Hearing protection - Hearing Awareness Week - 23rd to 29th August

    Who is responsible? Workplace/Occupational Health & Safety legislation in each State and Territory outline the responsibilities of individuals with regard to the management and control of Workplace Noise. Generally speaking the responsibility is placed on the owners of the workplace, the employer, and management of a particular site. Employees also have certain responsibilities. Employers and ...


    By Queensland Laboratory

  • Toe protection overshoes make headlines with new materials and designs

    Long considered the 'ugly duckling' of the safety footwear business, the safety toe overshoe developed from the venerable galosh has a new lease on life. To be fair, there have been some pretty ugly ones and even some that were downright dangerous. However, the ‘gumshoe’ has come a long way since African-American inventor Alvin Longo Rickman first patented an overshoe in 1898. Over the last 109 ...


    By Safetytoes International Inc

  • Industrial hygiene case study

    Service performed: Industrial hygiene monitoring at a pharmaceutical manufacturing facility Summary: Our environmental staff performed testing and consulting to determine employee exposure levels to hazardous chemicals at a large manufacturing facility. Engineering controls and personal protective equipment were also evaluated for its effectiveness during the ...


    By EFI Global, Inc.

  • EPA Mandates Skin Absorption Tests

    On April 26, 2004, the United States Environmental Protection Agency (EPA) issued a final rule under the Toxic Substances Control Act (TSCA) requiring manufacturers and processors of 34 chemicals to conduct in vitro dermalabsorption-rate testing. OSHA has identified the data necessary for these chemicals and intends to use the data obtained under the rule to evaluate the need for 'skin ...


    By Bergeson & Campbell, P.C.

  • EPA Promulgates SNUR for Polymer of Terephthalic Acid and Ethyl Benzene with Multi-Walled Carbon Nanotube (Generic)

    On February 2, 2015, the U.S. Environmental Protection Agency (EPA) promulgated through a direct final rule significant new use rules (SNURs) for 27 chemical substances that were the subject of premanufacture notices (PMNs). The substances include polymer of terephthalic acid and ethyl benzene with multi-walled carbon nanotube (generic) (PMN Number P-13-573), which is subject to a Toxic ...


    By Bergeson & Campbell, P.C.

  • Cleaning and maintenance management march 2002

    While the health risks associated with fluid waste have been known for decades, it wasn’t until the introduction of AIDS into our society that infection control practices and an awareness of the vulnerability to healthcare workers, including custodians, to exposure of bloodborne pathogens, including Heptatities B, became a major concern. Today, a myriad of regulations govern workers’ ...


  • New Chemical hazards in the workplace

    In the days when Industrial Hygiene became a recognized scientific discipline, smoke stacks belched black smoke in River Rouge, MI and Pittsburgh, PA. Men worked in clouds of coal and asbestos dust and labor was hard, physical and usually dangerous. Personal protective equipment was rare; its use, even rarer and its protective effect marginal. Today, the face of manufacturing has changed ...


    By Atlantic Environmental, Inc.

  • A smarter approach to solids control

    When looking at technical brochures and marketing materials in regards to solids-control equipment, one question that should always come to mind should be: Is this really necessary? Other great questions to ask are: What are my day-to-day needs; and what are my severe, high-duty needs? Finding the right solidscontrol equipment is much like buying a personal automobile. Most vehicles’ ...


    By Elgin Separation Solutions

  • ‘Slipp-R’ Safety Toes Case Study

    The European footwear industry has been under siege from low-cost manufacturers abroad.  Fortunately, standards are in place to ensure 'cheap' does not mean 'less' when it comes to workplace safety.  Safety footwear coming into the European markets must meet or exceed the minimum requirements for toe and foot protection as laid out in the CE standards.  This is good news for European ...


    By Safetytoes International Inc

  • Comments on 2011 Proposed SNURs Prompt Proposal Regarding Hierarchy of Controls

    On July 28, 2016, the U.S. Environmental Protection Agency (EPA) proposed changes to the existing regulations governing significant new uses of chemical substances under the Toxic Substances Control Act (TSCA) to align these regulations with revisions to the Occupational Safety and Health Administration’s (OSHA) Hazard Communications Standard (HCS), as well as changes to the OSHA ...


    By Bergeson & Campbell, P.C.

  • Intro to Industrial Hygiene

    Let's take a peek behind the curtain of one of our practitioner specialties--industrial hygiene. Read on for an interview with one of Antea Group's experienced pros. What is Industrial Hygiene? Industrial hygiene is a science and art devoted to the anticipation, recognition, evaluation, prevention, and control of those environmental factors or stresses arising ...


    By Antea Group - USA

  • Workplace falls get fresh attention

    The U.S. Occupational Safety and Health Administration (OSHA) is tackling a major source of industrial injuries — slips, trips and falls on workplace surfaces. On May 24, OSHA proposed significant revisions to Subparts D and I of the general industry standards dealing with walkingworking surfaces and personal protective equipment (PPE), respectively. This column outlines the reasons why ...


    By Bergeson & Campbell, P.C.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you