personal toxic gas monitoring Articles

  • Compressed Gas Safety Guide

    Use and storage of any compressed gas under high pressure can be extremely dangerous if proper gas handling procedures are not observed. Moreover, chemical characteristics of specialty gases themselves can pose serious health hazards if containment is not tightly controlled. Paying close attention to a compressed gas product’s technical and safety information is invaluable for maintaining a safe, ...

  • Is your Plant as tight as you think? Leak Detector for extremely toxic Gases, a Field Test Report

    Leak detection of commodity gases in chemical plants is a day-to-day practice. The sensor technology available for this application is field proven and reliable. No question about it, existing sensors will do the job. However, in plants manufacturing or handling extremely toxic substances, the picture is different. For example, take phosgene. The existing sensor technology for leak detection ...

  • Understanding the Benefits of Fixed Gas Detection

    "Fixed gas detection is an essential method of ensuring maximum protection for personnel and plant. There are a variety of technologies available for a multitude of applications. Understanding fixed gas detection is the first step in providing safety." What is fixed gas detection? Fixed gas detection is installed with the aim of providing continuous, area and personnel protection. ...


    By a1-cbiss

  • CO2 Gas Hazards in the Brewing Industry

    The hazards associated with CO2 in the brewing industry are well known, yet people still die needlessly every year in tragic and completely avoidable accidents in breweries. Just last year in Germany, which has a good safety record, two workers died in separate incidents at the same brewery. In the first incident, the owner was found dead with his head and torso in a beer mixing tank. It is ...

  • Pt. 3 - IN the MIX - Construction Safety and Gas Detection

    In our last blog (part 2 of 4) we consulted the OSHA Construction eTOOL to determine the factors that require a Gas Monitor. In this Blog (part 3 of 4) we explore Certified AIR ...


  • Argon Gas, 3D Printing, and How to Stay Safe

    For the average person, Argon gas is not a topic of daily conversation, or, for that matter, any conversation, ever. It may be surprising to learn that argon is the third most common gas in the earth’s atmosphere, though most people know little about it. The word argon itself comes from a Greek word meaning ‘inactive’ because of its lack of chemical reactions. Argon is ...

  • Pt. 1 - IN the MIX - Construction Safety and Gas Detection

    This is part one in a 4 part series to be posted over the next 4 weeks. "Pointers for Construction Safety & Health compliance" Rob Sant Technical Products Manager, Certified Air Safety, Vancouver Washington Threats to our workers health and safety are numerous; an often overlooked hazard is the quality of the air they breathe. Whether simple nuisance odors like ...


  • Benefits of HART Communication-Enabled Gas and Flame Detectors

    Catastrophic results can occur when a fire or a flammable/toxic gas release goes undetected in any petrochemical facility. For early warning and prompt hazard mitigation, flame detectors and gas detectors are essential tools. Clear, usable, diagnostic information from these detection instruments is extremely valuable in ensuring the devices are properly maintained, tested, and poised to protect ...

  • FTIR resolution requirements for industrial gas analyses

    FTIR Spectroscopy FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epitreatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D faciltities, FTIR is applied to combustion ...


    By CIC Photonics, Inc.

  • FTIR resolution requirements for industrial gas analyzers

    FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epi-treatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D facilities, FTIR is applied to combustion thermodynamics and stack gas emissions; ...


    By CIC Photonics, Inc.

  • Pneumatic Focusing Gas Chromatography: A 3-in-1 Continuous, Automated, Ambient-Fence line-Fugitive Emissions Instrument

    This project involved design improvements in both software and hardware, and commercialization of our Pneumatic Focusing Gas Chromatography technology for continuous monitoring of VOCs and Air Toxics and demonstration of its performance in year-long monitoring programs at an EPA Superfund site in Fargo North Dakota and an Oregon Department of Environmental Quality Air Toxics site in Portland ...


    By VOC Technologies

  • Greene King Brewery gas leak – carbon dioxide in breweries

    On Thursday 15 October 2015, a carbon dioxide leak occurred at the Greene King Brewery on an estate in Bury St Edmunds in Suffolk. Emergency services were sent to the incident and nearby residents were evacuated as a precaution. Twenty people were rescued from the building, and the incident was quickly taken control of. ...


    By Analox Sensor Technology

  • Inno-badge – an electronic dosimeter badge for continuous recording of a worker`s exposure to Phosgene gas

    Untitled Document Phosgene, also known as Carbonyl Chloride, is a widely used but highly toxic substance. At room temperature Phosgene gas is nearly colourless, and at low concentrations ...


    By Baum Publications Ltd.

  • Detecting Gases: What You Can`t Smell Can Hurt You

    Walking through a drill-site area, a worker smells rotten eggs and stops tor a minute or two to assess where a gas leak might exist. Rubbing his itchv eves as he investigates further, he notices that he no longer smells the tell¬tale hydrogen sulphide odour. He does not realize that the gas has deadened his olfactory senses and unless he leaves the area within seconds, he could lose ...

  • Read about Confined Space in Construction and Atmospheric Testing Right Here!

    In 1993, 29 CFR 1910.146 went into effect as the first federal legislation governing entry into permit-required confined spaces in general industry. Because some industries, such as the construction industry, were covered by specific Occupational Safety and Health Administration (OSHA) safety regulations, they were exempt from the confined space entry requirements of the general industry rule. ...


    By Argus-Hazco

  • Why does the market need a new Phosgene indicator badge?

    Usage of Phosgene Phosgene (COCl2) is a non combustible but very toxic gas. It is a raw material for plastics like Polycarbonates (i. e. Macrolon) or Polyurethanes. Monitoring of Phosgene Plants using or manufacturing Phosgene of course underlay strict safety regulations. Therefore they are equipped with portable and fixed gas detectors for Phosgene. While ...

  • Closures of mine a new challenge for Romania

    AbstractThe mining activity is one of the oldest activity in Romania, dating from the year 100 B.C. The gold and silver ores represented one of the riches of our country. In time the economic content of metals diminuend, and the ore mines become non profitable. Due to this situation the best option of the State was the closure and ecological rehabilitation of the mines.The steps for the ...


  • Ensuring personnel safety in a confined space

    “There are no second chances with a confined space entry. It has to be right first time.“ Identifying a confined space… The HSE Confined Space Regulations 1997 define a confined space as: “A space of an enclosed nature where there is a risk of death or serious injury from hazardous substances or dangerous conditions” Some confined ...


    By a1-cbiss

  • Indoor Air Quality

    Indoor Air Quality-Makes Me Sick EVM 7 measures it all   How often do you here ‘I need some fresh air’. Why do we say that? Maybe you simply want a break from the wife and kids or work colleagues! But it may be because the indoor air you are breathing in is contaminated. Indoor air contains significantly higher levels of contaminants than outside air.   ...


    By Shawcity Limited

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you