pet waste Articles

  • Leading from the front

    As one of the world’s leading incinerator design companies we have to stay ahead of the game. There is an old saying in business and it goes: “If you stand still you get left behind” and that has never been more true than it is today. As a leading incinerator design company we are always looking ahead … at new design innovations, at the latest ...


    By Todaysure Limited

  • 100 Simple Ways To Save Water

    To improve water conservation install a rain sensor, it turns off your irrigation when it rains. Use a weather-based controller. The use of smart controllers can reduce water usage 24% a year on average. Learn about available rebate programs ...


    By Jain Irrigation, Inc

  • Mono’s pet project at c&d foods

    Four SW042 progressing cavity pumps are fitted on the production line; two are fixed in the extrusion lines and another two are mounted on mobile trolleys. At the beginning and end of each extrusion cycle, if the purée is not of the correct consistency for packing or sale, it is extruded into the extended hopper of the mobile pump and then wheeled to the fixed pump where the purée is transferred ...


    By NOV Mono - Mono Pumps Ltd

  • Anaerobic Co-Digestion of a Single Source Oily Waste and High Strength Pet Food Wastewater: A Study of Failure and Revival of a Full Scale Digester

    ABSTRACTThis paper focuses on the revival of a formerly failed digester of 1800 m3 volume. The most obvious cause of failure was identified to be due to capping caused by foam and scum, as result of attempting to treat oil rich, high strength wastewater. The revival was affected by implementing co-digestion in a 3-step remedial procedure. Though in the typical sense, codigestion involves separate ...

  • Life Cycle Assessment (LCA) of PET bottles and comparative LCA of three disposal options in Mauritius

    Disposal of the increasing volume of used Polyethylene Terephthalate (PET) bottles has been a cause for concern for the Mauritian Government. To assist Government in decision-making, a study on PET bottles and its disposal was undertaken using the Life Cycle Assessment (LCA) tool. Three disposal scenarios, namely (100%) landfilling; (100%) incineration; and 50% landfilling and 50% incineration ...


    By Inderscience Publishers

  • Comparative in situ PET biodegradation assay using indigenously developed consortia

    A soil burial test was carried out to evaluate the biodegradation of polyethylene terephthalate under natural environment for a period of six months in presence of three different indigenously developed bacterial consortia. These consortia comprised of potential polymer-degrading bacterial cultures isolated from various waste disposal sites. The comparative biodegradation of PET samples in ...


    By Inderscience Publishers

  • Waste Incinerator Project

      Medical Waste Incinerator YD Model is our classic product for market. All series included burning capacity 10kgs per hour, 30kgs per hour,50kgs per hour,100kgs per hour,150kgs per hour,300kgs per hour,500kgs per hour. Up to now, all models sale to all over the world and have good feedback from end-customer. The YD Model medical incinerator have multi-combustion chamber and basic dry ...


  • Make money out of your waste

    Strautmann Umwelttechnik compacts Styrofoam® up to 700kg/m³ Make money out of your waste with balers from Strautmann Umwelttechnik. Week by week, there are many thousand of tons of waste which arise from packaging material and insulation material, which comes from expanded polystyrene, short EPS, like Styrofoam®. In the 90s the disposal of this very voluminous material was very ...

  • Sorting plants for industrial waste, location: south of Germany

    Task Separation and sorting of industrial and building site waste as well as bulky refuses. Potential recyclables such as wood, paper, plastics, metals and aluminium shall no longer be sent to garbage incineration, but can be recycled after the sorting into different material fractions. Solution Conception and realisation of a complete  industrial waste ...


  • Investigation the potential of recycling urban solid wastes

    Recycling is a solution to control the problem of managing urban solid wastes such as incineration and sanitary landfill. It consists re-processing of products and materials, which have been consumed several times. The methods which are presently used for recycling and processing the wastes of Ardakan City consists of collection by wastes collectors, separation by urban service labors and ...


  • Assessment of recycling potential of municipal solid waste in Mauritius

    The purpose of this paper is to implement a Reverse Vending Machine (RVM) which would divert valuable resources to recycling centres. It assessed materials having attractive scrap values such as glass, PET bottles and Used Beverages Cans (UBC). In this paper, two scenarios were proposed, namely: Scenario 1 which dealt with the selling of recyclables to recycling plants and Scenario 2 which ...


    By Inderscience Publishers

  • Investigation of the potential of recycling urban solid wastes

    Recycling is a solution to control the problem of managing urban solid wastes such as incineration and sanitary landfill. It consists re-processing of products and materials, which have been consumed several times. The methods which are presently used for recycling and processing the wastes of Ardakan City consists of collection by wastes collectors, separation by urban service labors and ...


  • London Strives For Zero Waste Summer Olympics 2012

    When London made its bid for the 2012 Summer Olympics, not only was “sustainability” front and center, equally paramount was leaving a legacy of public benefits to help justify the nearly $18 billion price tag. Both were also critical to London winning the right to host the games, which marks both the first time a city has done so three times (1908, 1948 and 2012) and the first time ...


    By BioCycle Magazine

  • Incorporation of petroleum waste in clay ceramics and its characterisation

    In Brazil, the growth of the petroleum industry has resulted in an increasing amount of toxic oily wastes that have a high environmental impact. This work analyses the possibility of recovering waste from the petroleum industry using the powder technology route to produce clay-based ceramics. Batches of clay-petroleum waste mixes with up to 20 wt.% waste were prepared. The results showed that the ...


    By Inderscience Publishers

  • Sorting plant for domestic waste and light packagings, location: Spain

    Task Automation of the excisting sorting line for light packagings and optimisation of the processing  line for domestic waste (organic part).  The throughput rates of both lines shall be  considerably increased upgrading the quality  of the compost and recovering a higher proportion of light packagings at the same  time. Solution ...


  • Alcázar de San Juan Waste Management plant, Spain - Case Study

    The Alcázar De San Juan Waste Management Plant Now Has Four Titech Autosort Units The latest remodeling of the Municipal Solid Waste (MSW) Management Plant in Alcázar de San Juan (Ciudad Real, Spain) includes two new TITECH autosort 4 optical sorting units. Overview The Municipal ...


    By TOMRA Sorting (TITECH)

  • New sorting plant for dry commingled and C&I waste in Nottingham

    The recycling company Wastecycle in Nottingham expects to process in excess of 45,000t / year and are pleased that the implementation of the plant has allowed them the flexibly to achieve positive results from the various waste streams. The management of Wastecycle asked KMH Systems and REDWAVE to assist them in developing together a new plant based on the following objectives: Increase ...

  • Implementation of the Waste Minimisation Hierarchy - Reduce, Reuse, Recycle: Television Victoria Pty Ltd

     The three R’s - reduce, reuse and recycle - was the battlecry used by the Ballarat-based Television Victoria in its fight against waste. Through simple but effective waste minimisation measures, the company achieved its goal of reducing waste production by 50% within only four months, two months ahead of time. The company has shown that while recycling is the most commonly used method of ...


  • Sorting and Recycling Municipal Solid Waste (MSW) in Xiamen City, China - Case Study

    TOMRA Sorting Recycling is playing a pivotal role in the implementation of automatic sorting at the MSW plant in Xiamen Background The city of Xiamen, renowned for its natural beauty, is located on China's southeast coast, in Fujian Province. Its famous seascape and clean natural environment are a magnet for tourists, and the city government wants to keep things ...


    By TOMRA Sorting (TITECH)

  • The study of the recovery of highly purified terephthalic acid from alkali weight-reduction wastewater

    A new process has been developed for recovering the terephthalic acid (TPA) with high purity from alkali weight-reduction wastewater. Three methods were used to purify the mother liquor: coagulation-sedimentation, carbon adsorption and the combination of these two methods. The results show that the nature of the TPA is greatly improved by coagulation-sedimentation or by carbon adsorption, ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you