petroleum detector Articles

  • Two Detector Solution to Analyzing Sulfur

    Sulfur compounds are reactive, corrosive to pipes, and destructive to catalysts in petroleum refineries. Sulfur emission are strictly regulated globally. When released into the atmosphere sulfur dioxide converts to sulfuric acid resulting in adverse effects on human health and the environment. Sulfur detection is found useful in many other industries; therefore, detection of sulfur compounds in ...


    By Restek Corporation

  • Survey of standards related to gas detectors

    Recent events both on- and off-shore shine a bright light on the need for attention to safety and to hazard reduction, prevention, and mitigation. Errant combustible or toxic gases can injure and kill quickly. Therefore, mitigation of these hazards must be fast and sure. Globally, governmental and regional authorities take gas detection and system integration very seriously and require that the ...

  • The radiological impact of the presence of radon, thoron and their progeny in the environment of a liquid petroleum gas bottling plant

    The seasonal variation of the activity of radon, thoron and their progeny has been measured, and the annual exposure, lifetime fatality risk and annual effective dose to the workers in a Liquid Petroleum Gas (LPG) bottling plant due to exposure from a mixed field of radon and thoron have been calculated over the four seasons of the year. The measurements were carried out using a passive ...


    By Inderscience Publishers

  • Is it clean or contaminated soil? Using petrogenic versus biogenic GC‐FID chromatogram patterns to mathematically resolve false petroleum hydrocarbon detections in clean organic soils: A crude oil spiked peat microcosm experiment

    The Canadian Council of Ministers of the Environment (CCME) Reference Method for the Canada‐Wide Standard (CWS) for Petroleum Hydrocarbons (PHC) in Soil provides chemistry analysis standards and toxicity guidelines for the remediation of contaminated sites. However, these methods can co‐extract natural biogenic organic compounds (BOCs) from organic soils, causing false exceedences of toxicity ...


    By John Wiley & Sons, Ltd.

  • NORA Crude Oil Storage Tanks Case study

    The National Oil Reserves Agency (NORA) was established in 1995 as a subsidiary of the Irish National Petroleum Corporation Limited (INPC). NORA is the State Agency responsible for the holding of national strategic oil stocks at a level determined annually by the Minister for Communications, Energy and Natural Resources. Mercury Engineering in conjunction with MICROPACK, supplied, installed and ...

  • Fire and Smoke Detection System - A must have Component in Aircrafts

    Summary: Fire and Smoke detector system is one of the must have components of aircrafts of any kind. They ensure safety of the passengers by giving indications of any kind of fire burst. Here you find a brief on the significances and the types of life securing fire and smoke detection systems. What are the Significances of Fire Detection Systems? One of ...


  • Case study - GRO in soil at gasoline UST site

    These case studies show the performance using Sitelab’s UVF-3100 analyzer testing gasoline range organic hydrocarbons.  This includes benzene, xylene, BTEX and other volatile petroleum compounds in the GRO or VPH C6 to C10 hydrocarbon range. When calibrated using Sitelab's GRO calibration kit (CAL-025), the UVF analyzer produces test results that correlate well to laboratory ...


    By Sitelab Corporation

  • Follow toxic gas standards for a smoother project

    Toxic gases, such as Hydrogen Sulfide and Sulfur Dioxide, can injure and kill quickly. Therefore, mitigation of these hazards must be fast and sure. The United States Occupational Safety and Health Administration (OSHA) and other authorities take detection of these gases very seriously. The American National Standards Institute/ American Petroleum Institute (ANSI/API) and ISA industry standards ...

  • Improving Safety by Conforming to Industry Standards and Certifications

    Abstract Globally, safety standards play a key role in designing and executing gas and flameame detection projects. How can these standards, which might seem cumbersome at times, help users make informed decisions? What information can be used to assist in conforming to standards and maximizing safety? This paper will analyze standards from an end-user view, will consider ...

  • PetroSense hydrocarbon sensors and their applications

    The increasing concern about hydrocarbon contamination of process water and produced water has created an increasing need for in-situ, real time, and accurate low cost instrumentation that can provide rapid detection and easily usable in the field. PetroSense sensors [1,2] represents “best in breed” technology for the detection of total petroleum hydrocarbons (TPH). PetroSense sensors ...


    By PetroSense, Inc

  • PID in industrial hygiene

    Industrial (or occupational) hygiene places the emphasis on prevention of ill health from work, through recognising, evaluating and controlling the risks. For anyone working with hazardous compounds, these chemicals represent a significant potential source of risk. Modern PID instruments provide reliable detection of over 200 of the most dangerous chemicals, helping to ensure effective industrial ...


    By Ion Science

  • Identifying Leaks from Natural Gas Pipelines at a Safe Distance

    The use of natural gas, of which methane is the principle component, is increasing worldwide. According to the American Petroleum Institute methane meets 24% of U.S. energy demand and heats over 50% of all U.S. households. It also has many industrial uses, such as the manufacture of chemicals like ammonia, methanol, butane, ethane, propane and acetic acid; it is also an ingredient in products as ...

  • Air Monitoring for the Gulf Oil Spill

    Ambient air monitoring is a priority in the ongoing efforts to contain and manage the oil spill from the Deepwater Horizon in the Gulf of Mexico. The following provides information about the kinds of airborne contaminants that are currently being monitored in the Gulf, how they are collected and how they are analyzed. For a given project, a suitable sampling plan – developed by ...


  • Triad expedites brownfields redevelopment in Fairbanks

    The Fairbanks North Star Borough (FNSB) used Triad in 2006-2007 to assess environmental conditions at a municipal property along the Chena River in Fairbanks, AK. FNSB accelerated the site investigation as part of a brownfields assessment grant received from the U.S. EPA in 2005. Low-level contamination had been identified onsite in past investigations, but its extent and impact on future ...

  • Analytical Testing for Corexit Dispersants Used in the Gulf Spill

    The analysis of various sample matrices (seawater, sediment, tissue) to determine concentrations of Corexit dispersants used in the Gulf spill requires the use of one or more of the components in the dispersant as a tracer. The primary active ingredient (i.e. the primary surfactant) in the Corexit products is Dioctyl Sulfosuccinate Sodium Salt (DOSS). The other primary ingredients function as ...


  • The Hazards of Being in a Beauty Salon

    There are many health risks associated with the beauty industry due to the chemicals found in the products. We are all affected by these chemicals every time we go to the beauty salon. Many of the products found in these salons are classified as hazardous and extreme caution should be taken into consideration when using these products. They’re made for professional use only; therefore, ...

  • Pumps for the Booming FPSO Sector

    In the last few years, several new offshore oil fields have been discovered. The current findings from Petrobras and other companies in the pre-salt province, located in the Brazilian continental shelf, suggest reserves of over 50 billion barrels of oil. Extracting the pre-salt oil is challenging and done increasingly with floating production storage and offloading units (FPSOs). Sulzer offers a ...


    By Sulzer

  • Monitoring flammable gas in boiler houses

    The most common fuels in use for space and water heating are Oil, Natural Gas and Liquid Petroleum Gas (LPG). By far the most popular, clean and cost effective solutions are utilising Natural Gas or LPG. The traditional safety measure derived from the time of oil fired boiler houses is the use of a fusible link placed above the each boiler. The fusible link is intended to melt if it becomes ...

  • Analyzing sulfur in soil and sediment with handheld XRF

    Background Sulfur creates more than nasty odors. Exposure to low levels (0-10ppm) of hydrogen sulfide (H2S) causes irritation of eyes, nose, and throat; higher levels can cause headaches, dizziness, nausea and vomiting, coughing, and breathing difficulty. H2S and numerous other odor-causing compounds are generated as a result of organic material decomposition. In the case of the Muddy River in ...

  • If you can`t stand the CO2, get out of the kitchen - part 1

    There are two potentially dangerous types of gas in a commercial kitchen: 1) the flammable ones used for cooking (e.g. methane/natural gas; propane/liquefied petroleum gas); and 2) the noxious, gaseous products of combustion such as carbon monoxide, carbon dioxide and hydrocarbons. It would be good to know how to avoid them. But a search for advice on kitchen ventilation threatens to drown the ...


    By Analox Sensor Technology

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you