ph adjustment system Articles

  • Chemicals used for pH Adjustment

    The Chemistry of Limestone Treatment: Limestone is an alkaline agent with the ability to neutralize, or partially neutralize strong acids. The neutralization process occurs when strong acids, in intimate contact with limestone chips, react with Calcium Carbonate (CaCO3, the primary constituent of limestone) to form water, carbon dioxide and calcium salts. The following depicts the neutralization ...


    By Digital Analysis Corp.

  • pH Adjustment - A Primer

    A brief review of the definition of pH, the pH scale, and some of the chemistry involved in pH Adjustment systems is provided below. For some this may be trivial, yet for many others this may be useful. The information provided below is typical of the background information we provide in our training classes / seminars. By Definition pH is the measure of free hydrogen activity in water and can be ...


    By Digital Analysis Corp.

  • Chemicals used for pH Adjustment

    The most commonly used neutralization chemicals for acid or base neutralization are 98% Sulfuric acid and 50% Sodium hydroxide. In many cases these are very good choices, however, there are many considerations when selecting chemicals and these may not always be the best selection. The selection of the chemicals used for the neutralization of an acid or base is almost as important as the design ...


    By Digital Analysis Corp.

  • Seven Ways Your Facility Isn’t Meeting Effluent Regulations and How to Solve Them

    Whether you own, operate, or help manage a municipal or industrial facility that deals with wastewater, it’s important to understand how wastewater treatment can play a significant role in the overall health of your business, especially when it comes to meeting effluent regulations. This is an important part of the wastewater treatment process to consider, as ignoring it could earn your ...


    By SAMCO Technologies, Inc.

  • pH-adjustment strategy for volatile fatty acid production from high-strength wastewater for biological nutrient removal

    Volatile fatty acid (VFA) production from three types of high-strength organic wastewater (cassava thin stillage, starch wastewater and yellow-wine processing wastewater) were compared. The results showed that cassava thin stillage was the most suitable substrate, based on its high specific VFA production (0.68 g chemical oxygen demand (COD)/g initial soluble chemical oxygen demand (SCOD)) and ...


    By IWA Publishing

  • Using AquaBupH to adjust aquifer PH: ESTCP-funded project at Charleston Naval weapons station - Case Study

    Elevated levels of trichloroethene (TCE) were found in groundwater at a Department of De-fense (DoD) facility in Charleston, SC. Under an ESTCP-funded in situ technology demonstra-tion project , the Navy had been effectively remediating contamination until a drop in aquifer pH caused dechlorination rates to decline. Solutions-IES responded with a study and applica-tion of buffered substrate to ...


    By EOS Remediation, LLC

  • CO2 degasifiers packed with LANPAC cut the cost of drinking water pH adjustment to comply with EPA Lead and Copper Rule.

    After the phase-out of leaded gasoline and the ban on lead-based pigments in house paint, concerned has focused on the risk of lead exposure from drinking water due to corrosion of old plumbing containing lead pipe or solder. To reduce ...


    By Lantec Products, Inc.

  • pH Probe Maintenance

    The success or failure of pH measurement depends on the proper application of the probe and proper subsequent maintenance of the probe. The procedures described within apply to the most common pH probe in use today and that is the flat surface combination pH probe. The most common failure mode associated with pH probes is breakage. The pH electrode is a very thin glass membrane that is easily ...


    By Digital Analysis Corp.

  • Cycle chemistry pH measurement

    pH measurement in high purity water has met with variable success. The high resistivity of pure water, the vulnerability to contamination, the variability of reference electrodes and additional temperature effects converge to make tins a particularly challenging measurement. Overcoming these obstacles requires a thorough understanding of the potential problems and their systematic solution. ...


    By SnowPure Water Technologies

  • Getting back to basics: What is pH?

    Getting back to basics: What is pH? The most used measure in wastewater treatment, and for good reasons The “potential of hydrogen” or “pH” is the measure of free hydrogen activity in water and thereby indicative of the measure of its free acidity or free alkalinity. Gauged on a numeric scale of 0-14, solutions with a pH of less than 7.0 are acids. ...

  • DOD evaluates bioaugmentation for remediating low-pH aquifers

    The US Department of Defense (DOD) has completed pilot-scale work on the 'MAG-1' site at Fort Dix, NJ, to test suitability of anaerobic bioremediation for an aquifer with low pH. Project results will be used to design full-scale ground-water treatment at MAG-1. In addition, technical criteria gained from the demonstration will be integrated into DOD’s remediation strategy for its many facilities ...

  • Effects of pH on uranium uptake and oxidative stress responses induced in Arabidopsis thaliana

    Uranium (U) causes oxidative stress in Arabidopsis thaliana plants grown at pH 5.5. However, U speciation and as such its toxicity strongly depends on environmental parameters, e.g. pH. It is unknown how different U species determine U uptake and translocation within plants and how they might affect the oxidative defense mechanisms of these plants. The present study aimed to analyze U uptake ...


    By John Wiley & Sons, Ltd.

  • The Control of pH and Oxidation Reduction Potential (ORP) in Cooling Tower Applications

    The importance of keeping cooling tower water in proper chemical balance is becoming clearer. Cooling tower treatment control systems can limit scale formation to improve efficiency, limit corrosion to increase the service life of the cooling water system, and maintain a residual halogen level to reduce liability associated with biological growth, particularly Legionellae.   The use of ...


    By Walchem, Iwaki America Inc.

  • Maintaining neutral pH in deep soils and ground water utilizing insoluble colloidal buffers.

    Optimal pH for most biodegradation processes falls between 6.5 and 8.5. Enhanced bioremediation in poorly buffered soils and ground water is likely to lower pH below 6.5 as the added electron donor produces carbon dioxide and organic acids. The common agricultural practice of liming soils adds alkalinity and adjusts soil pH by mixing finely divided insoluble calcium carbonate into the shallow ...


    By RNAS Remediation Products

  • Maintaining neutral pH in deep soils and ground water utilizing insoluble colloidal buffers

    ABSTRACT: Optimal pH for most biodegradation processes falls between 6.5 and 8.5. Enhanced bioremediation in poorly buffered soils and ground water is likely to lower pH below 6.5 as the added electron donor produces carbon dioxide and or ganic acids. The common agricultural practice of liming soils adds alkalinity and adjusts soil pH by mixing finely divided insoluble calcium ca ...


    By RNAS Remediation Products

  • ALKION column and eluant system

    Introduction: The stationary phase in the ALKION column is a rigid, non-porous polymeric phase that is surface sulfonated. The two modes of separation are ion-exchange and moderate partitioning. The low capacity of the ion-exchange resin makes it an ideal phase for the separation of strongly basic and positively charged compounds. The reversed-phase character allows for ...


    By Pickering Laboratories, Inc.

  • Skid Systems - Case Study

    A Chemical Metering Pump is seldom used by itself. It is usually a part (ok, the part) of a chemical injection system into a process. Such a system requires various accessories, valves and controls to dispense the exact amount of chemical demanded by the application which may itself vary. Let us say if you are using chemical pump to achieve pH balance for the water. You need to measure the pH of ...

  • Microfiltration Pilot System, California

    INTRODUCTION In May 2013, Pure Aqua, Inc. successfully manufactured and supplied an microfiltration pilot system to a membrane manufacturer for Title 22 certification. Title 22 is the State of California’s stringent standard for treatment/disinfection of wastewater for non-potable reuse and ...


    By Pure Aqua, Inc.

  • Ion Exchange Systems.

    When properly applied, ion exchange for concentrated ion recovery is by far the best available technology. Where effluent streams can be filtered and ions requiring different regenerants can be segregated, ion exchange is usually the most cost effective and least capital intensive solution. We provide 4 levels of integration to cover most applications and capital budgets. The variations in the ...


  • Removing Struvite from wastewater systems

    Named after Henrich Christian Gottfried Von Struve, who discovered the magnesium ammonium phosphate crystals in medieval sewer systems in Hamburg in 1845, struvite is a major problem for waste water treatment plants. The hard, crystalline deposit forms scale on lines and belts, in centrifuges and pumps.  It also clogs system pipes and other equipment including anaerobic ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you