ph monitoring instrument manufacturer Articles

  • pH Probe Maintenance

    The success or failure of pH measurement depends on the proper application of the probe and proper subsequent maintenance of the probe. The procedures described within apply to the most common pH probe in use today and that is the flat surface combination pH probe. The most common failure mode associated with pH probes is breakage. The pH electrode is a very thin glass membrane that is easily ...


    By Digital Analysis Corp.

  • Tech update: Plant instrumentation - food engineering

    Sensors and other devices are the foot soldiers in automation architecture, but most food and beverage manufacturers still are looking for full value. You know an equipment category has arrived when it starts getting its own industry-specific center. For the food production sensors that do the heavy lifting in instrumentation technology, that day could arrive earlier rather than ...


    By Hardy Process Solutions

  • Dairy Crest – Dairy Effluent Treatment Case Study and Partech Water Instruments

    In order to comply with environmental regulations, the food and beverage industry relies heavily on constant monitoring and control of wastewater and effluent, before discharge from the plant. Additionally, if process plants fail to be vigilant when it comes to monitoring all areas of waste treatment, the results can be unsuccessful. Partech’s water instruments are ...


    By Partech (Electronics) Ltd.

  • Treatment plant protected by effluent monitor at major drinks factory

    The installation of a BioTector continuous TOC (Total Organic Carbon) monitor to police the front end of Cobevco’s wastewater treatment plant has enabled tight control of the treatment process. Delivering results 20 times faster than laboratory techniques, the monitor at the Elton facility in Cheshire provides advance notice of organic overload so that the plant is able to instantly divert ...


  • Modular treatment system neutralizes process water

    A self-contained pH control and monitoring sys- tem for ready mixed operations yields clean water for recycling or permitted discharge to the environment. Fortrans' Model 5000S uses car- bon dioxide gas to neutralize high-pH process water, offering precise alkalinity monitoring and control of water in pits, settling basins and other containment areas, as it lowers total suspended solids. Designed ...


    By Fortrans, Inc.

  • Microfiltration Pilot System, California

    INTRODUCTION In May 2013, Pure Aqua, Inc. successfully manufactured and supplied an microfiltration pilot system to a membrane manufacturer for Title 22 certification. Title 22 is the State of California’s stringent standard for treatment/disinfection of wastewater for non-potable reuse and ...


    By Pure Aqua, Inc.

  • Advanced Water Quality Techniques Course

    Abstract:The development of a strategic water quality monitoring program is based on prioritizing risks to public safety and economic reality. The development of global standardized methods and protocols for automated water quality monitoring would facilitate international communication of water quality information and comparison of standardized methods and protocols. The three primary methods ...


  • Wastewater treatment down-time `not acceptable`

    Reliable 24/7 monitoring and control of a pharmaceutical company's wastewater facility is fundamentally important to the successful operation of the entire business. This is because failures or down-time in the wastewater treatment process would quickly result in waste stream back up. It follows therefore that monitoring equipment should be extremely reliable and this is why Shasun Pharma ...


  • Miller Argent case study

    On the hills above Merthyr Tydfil, Miller Argent is undertaking a highly ambitious land reclamation scheme that is also involving the extraction of coal by opencast methods. Known as the 'Ffos-y-fran Land Reclamation Scheme', this is the third and final phase of the East Merthyr Reclamation Scheme which is expected to run for another 17 years. The reclamation works will include the removal of ...


    By Partech (Electronics) Ltd.

  • Real-time TOC tightens effluent control at Greencore

    A food manufacturing facility in Selby has installed a new continuous TOC (Total Organic Carbon) monitor, ‘the BioTector’ which has dramatically improved the site’s capability to refine and improve the plant’s wastewater treatment process. As a result the plant is better able to quickly respond to changes in the influent. Greencore Foods is a leading player in the food ...


  • Low-Flow (Minimal Drawdown) Ground-Water Sampling Procedures

    Untitled Document Background The Regional Superfund Ground Water Forum is a group of ground-water ...


    By Solinst Canada Ltd.

  • Wyman Gordon Case Study

    Wyman-Gordon is a world class materials company with nearly 200 years of metals engineering experience. They are the acknowledged leader in the production of high-quality closed-die forgings and extrusions for the most critical applications. Markets served include those for commercial and military aircraft; gas turbine engines; oil and gas exploration; land based gas turbine and power generation; ...


    By Mech-Chem Associates, Inc.

  • Hazardous waste and not, Baioni-Dicatech system

    The identification, characterization and restoration of contaminated areas now represent a big environmental issue, both at European and national level. In the major industrialized countries the issue of contaminated land has come out in all its gravity in the late seventies when, against a widespread awakening of environmental consciousness, important pollutions events emerged. Consequently, in ...


    By Baioni Crushing Plants Spa

  • Application of Membrane Technology for the Recovery and Reuse of Water

    Abstract As water and sewer costs are expected to increase over the next decade, membrane technology will continue to be a viable and economical option in the recovery and reuse of water. This paper describes the mechanism of membrane effected separation (specifically reverse osmosis, ultrafiltration and microfiltration), membranes commercially available, membrane element configurations, and how ...


  • LIMS and the Automation of the Water Lab

    (Reproduced by permission from Laboratorium Magazine) Europe’s most modern water lab is located in Leeuwarden, in the Netherlands. Vitens made a big splash when it brought this modern building, with its transparent design, into operation in January 2005. Many colleagues from Dutch and foreign labs are eager to visit this installation, where water control samples are routed automatically with the ...


    By STARLIMS Corporation

  • Distributed Measurements Unlock the Future of Design

    The next generations of materials and design will require sensing technologies that can monitor beyond the scope of point sensors such as thermocouples and strain gauges. New sensing platforms based on optical fibers can obtain spatially continuous, real time data, giving developers detailed insight across broad areas into how their materials and designs behave. Such systems also can sense ...


    By Sensuron

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you