ph monitoring system manufacturer Articles

  • pH Probe Maintenance

    The success or failure of pH measurement depends on the proper application of the probe and proper subsequent maintenance of the probe. The procedures described within apply to the most common pH probe in use today and that is the flat surface combination pH probe. The most common failure mode associated with pH probes is breakage. The pH electrode is a very thin glass membrane that is easily ...


    By Digital Analysis Corp.

  • Ph and total solids control for concrete producers

    Fortrans Inc. manufactures a self-contained pH control and monitoring system that uses CO2 gas to neutralize high pH process water and lower total suspended solids in process water produced at ready mixed concrete plants. The Model 5000S pH Control and Monitoring System offers precise pH control, monitoring of pH and lowers “Total Suspended Solids” of process water contained in pits, ...


    By Fortrans, Inc.

  • 3 Essential Things You Need to Know Before Buying a pH Data Logger

    Measurement of the pH of a solution is very common in industrial manufacturing processes, plating, wastewater treatment and environmental monitoring. Logging this data provides you with information on long-term trends and the impact of various external factors on changes in pH, and can also be used for control, compliance reporting and alarming. However, to capture accurate pH measurements with ...


    By CAS DATALOGGERS

  • Monitoring and Controlling Pretreated Liquid Waste

    Intelligent dataTaker System Handles All Data Collection CAS DataLoggers has just provided an intelligent data logger for a manufacturer facing stringent environmental regulations requiring them to continuously monitor and manage their effluent disposal. Before effluent is discharged from the facility, it had to be heavily ...


    By CAS DATALOGGERS

  • A breath of fresh air - Wet scrubbing eliminates odors associated with processing discarded liquid from cheese manufacturing

    When International Ingredient Corp.’s drying plant in Monroe, WI, opened in 1994, it was the first plant designed specifically for large-scale drum drying of dairy products for the feed industry. At that time, its only neighbor was a cheese producer. International Ingredient used a land spread technique to process the discarded liquids resulting from its neighbor’s cheese ...


    By Bionomic Industries Inc.

  • A breath of fresh air - Wet scrubbing eliminates odors associated with processing discarded liquid from cheese manufacturing.

    When International Ingredient Corp.’s drying plant in Monroe,WI, opened in 1994, it was the first plant designed specifically for large-scale drum drying of dairy products for the feed industry.At that time, its only neighbor was a cheese producer. International Ingredient used a land spread technique to process the discarded liquids resulting from its neighbor’s cheese manufacturing process. ...


    By Bionomic Industries Inc.

  • Microfiltration Pilot System, California

    INTRODUCTION In May 2013, Pure Aqua, Inc. successfully manufactured and supplied an microfiltration pilot system to a membrane manufacturer for Title 22 certification. Title 22 is the State of California’s stringent standard for treatment/disinfection of wastewater for non-potable reuse and ...


    By Pure Aqua, Inc.

  • Skid Systems - Case Study

    A Chemical Metering Pump is seldom used by itself. It is usually a part (ok, the part) of a chemical injection system into a process. Such a system requires various accessories, valves and controls to dispense the exact amount of chemical demanded by the application which may itself vary. Let us say if you are using chemical pump to achieve pH balance for the water. You need to measure the pH of ...

  • Treatment plant protected by effluent monitor at major drinks factory

    The installation of a BioTector continuous TOC (Total Organic Carbon) monitor to police the front end of Cobevco’s wastewater treatment plant has enabled tight control of the treatment process. Delivering results 20 times faster than laboratory techniques, the monitor at the Elton facility in Cheshire provides advance notice of organic overload so that the plant is able to instantly divert ...


  • Online Process Analyzer Installed at F.J. Horgan WTP to Monitor Chloramination

    Construction was completed on the City of Toronto's F.J. Hor-gan Water Treatment Plant in 1979, more than 60 years after chloramine had first been used to disinfect drinking water in an Ottawa plant. By then there was little debate about the benefits of chloramination and it was incorporated into the new plant's design as part of the disinfection process. Chloramine is more stable than free ...

  • Modular treatment system neutralizes process water

    A self-contained pH control and monitoring sys- tem for ready mixed operations yields clean water for recycling or permitted discharge to the environment. Fortrans' Model 5000S uses car- bon dioxide gas to neutralize high-pH process water, offering precise alkalinity monitoring and control of water in pits, settling basins and other containment areas, as it lowers total suspended solids. Designed ...


    By Fortrans, Inc.

  • Hazardous waste and not, Baioni-Dicatech system

    The identification, characterization and restoration of contaminated areas now represent a big environmental issue, both at European and national level. In the major industrialized countries the issue of contaminated land has come out in all its gravity in the late seventies when, against a widespread awakening of environmental consciousness, important pollutions events emerged. Consequently, in ...


    By Baioni Crushing Plants Spa

  • Case study: KLORIGEN™ system performance

    Des Moines Water Works (DMWW) plays a key role in providing the city of Des Moines and other communities in central Iowa with a safe, clean and healthy water supply. The DMWW operates two water treatment plants in central Iowa, one on Fleur Drive in Des Moines and the second one at Maffitt Reservoir, located southwest of the metropolitan area. Des Moines Water Works is an independently operated ...

  • High pressure pumping systems - it`s all in the design

    High pressure pumping systems are used in a wide range of industrial processes. Careful selection of the components of the pumping system is essential for optimum safety and reliability. Failure to install a quality pump designed for the task could present a potential risk to human health or life or result in significant down-time and loss of production capacity with the associated costs to the ...


    By Cat Pumps

  • What Is a Cooling Tower Water Treatment System and How Does It Work?

    For industrial companies using a cooling tower for its facility, some type of cooling tower water treatment system is usually necessary to ensure an efficient process and long equipment service life. If cooling tower water is left untreated, organic growth, fouling, scaling, and corrosion can reduce plant productivity, cause plant downtime, and require costly equipment replacements down the ...


    By SAMCO Technologies, Inc.

  • How to Choose the Best Wastewater Treatment System for Your Plant

    For industrial companies producing wastewater as a byproduct of their process, some type of wastewater treatment system is usually necessary. Failing to properly treat your wastewater can potentially harm the environment, human health, and your process, in addition to causing your facility to incur heavy fines and possible legal action if it is being improperly discharged into a publicly owned ...


    By SAMCO Technologies, Inc.

  • How Do You Know If You Need a Cooling Tower Water Treatment System for Your Plant?

    In order to keep your production flowing smoothly and avoid costly damage to your cooling tower equipment, the proper treatment of your cooling tower water is essential. If cooling tower water is not properly treated, organic growth, fouling, scaling, and corrosion can reduce plant productivity, cause plant downtime, and require costly equipment replacements down the road. ...


    By SAMCO Technologies, Inc.

  • Dairy Crest – Dairy Effluent Treatment Case Study and Partech Water Instruments

    In order to comply with environmental regulations, the food and beverage industry relies heavily on constant monitoring and control of wastewater and effluent, before discharge from the plant. Additionally, if process plants fail to be vigilant when it comes to monitoring all areas of waste treatment, the results can be unsuccessful. Partech’s water instruments are ...


    By Partech (Electronics) Ltd.

  • Mercury Removal from Nerve Gas Ton Container Rinse Waters

    IE was retained by a United States Army subcontractor to perform a process determination with analytical verification for the treatment of the rinse water from decontaminated nerve gas agents. The Pentagon Munitions Deconstruction Committee (PMDC) fully reviewed and approved the process developed. The wastewater was generated from the rinsing of 2,000-pound (ton) containers in a punch/drain/rinse ...


    By Integrated Engineers Inc.

  • Sustainable wastewater treatment chemicals in a food processing plant

    A food ingredients manufacturer was using an inorganic aluminium metal salt with pH correction to treat their effluent. This chemical regime refused to give them any real control over their effluent characterisation. Their effluent plant required constant monitoring and adjustment. The inability to control the characterisation of the effluent exiting the site meant non-compliance to the ...


    By Atana Limited

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you