ph sensor system Articles

  • pH Probe Maintenance

    The success or failure of pH measurement depends on the proper application of the probe and proper subsequent maintenance of the probe. The procedures described within apply to the most common pH probe in use today and that is the flat surface combination pH probe. The most common failure mode associated with pH probes is breakage. The pH electrode is a very thin glass membrane that is easily ...


    By Digital Analysis Corp.

  • pH Adjustment - A Primer

    A brief review of the definition of pH, the pH scale, and some of the chemistry involved in pH Adjustment systems is provided below. For some this may be trivial, yet for many others this may be useful. The information provided below is typical of the background information we provide in our training classes / seminars. By Definition pH is the measure of free hydrogen activity in water and can be ...


    By Digital Analysis Corp.

  • Getting back to basics: What is pH?

    Getting back to basics: What is pH? The most used measure in wastewater treatment, and for good reasons The “potential of hydrogen” or “pH” is the measure of free hydrogen activity in water and thereby indicative of the measure of its free acidity or free alkalinity. Gauged on a numeric scale of 0-14, solutions with a pH of less than 7.0 are acids. ...

  • Esterase autodisplay: enzyme engineering and whole-cell activity determination in microplates with ph sensors

    Among the GDSL family of serine esterases/lipases is a group of bacterial enzymes that posses C-terminal extensions involved in outer membrane anchoring or translocation. ApeE from Salmonella enterica serovar Typhimurium, a member of this group, has been expressed in Escherichia coli and was resistant to protease digestion when the protease was ...

  • Get the scoop on the newest technology for the measurement of pH

    SENTRON had its 20th birthday in April 2005 and is world wide known as the manufacturer of glass free ISFET (Ion Sensitive Field Effect Transistor) pH systems. During the 20 years we developed and manufactured not only ISFET pH sensors but also pressure sensors in our own silicon chip production facility. This facility for development and manufacturing of solid-state sensors, enables us to ...


    By Sentron Europe BV

  • Is pH a red herring when it comes to ocean acidification?

    New research points to saturation state, not pH, as the most pressing metric to track when it comes to shellfish survival. In 2007, the owners of Whiskey Creek oyster hatchery on the Oregon coast lost almost all of their larvae — and had no idea why. The only clue was that the larval die-offs often occurred during intense upwelling events, when ...


    By Ensia

  • Sensors & Automation to Simplify Bioprocess Operations

    Utilising sensors & automation to simplify bioprocess operations means that more work can be done in less time. By automating the routine tasks carried out in the lab, valuable time can be devoted to more important tasks. Here are two practical examples of automating routine tasks in upstream and downstream bioprocessing with relatively simple instrumentation. Automated ...


    By Broadley-James Ltd

  • Impact parameters investigation of DNA immobilisation process on DNA sensor response

    This paper studies impact parameters of DNA sequence immobilisation on DNA sensor response. The parameters were examined including immobilisation time, carbon nanotubes concentration, DNA probe concentration and pH value. The DNA probe sequences were immobilised on surface of microelectrodes by using multi–walled carbon nanotubes (MWCNTs) as mediator. The hybridisation between DNA probe and DNA ...


    By Inderscience Publishers

  • Partech Water Instruments Case Study: China’s Success with Partech’s Clever Sensors!

    Ronghuai Water Group uses Partech water instruments in 20 of their water plants across China! Currently, the Watertechw2 pH8000 and TurbiTechw2 LA sensors are used in the plants. The ...


    By Partech (Electronics) Ltd.

  • Factors affecting the performance of a single-chamber microbial fuel cell-type biological oxygen demand sensor

    Microbial fuel cells (MFCs) are devices that exploit microorganisms as biocatalysts to degrade organic matter or sludge present in wastewater (WW), and thereby generate electricity. We developed a simple, low-cost single-chamber microbial fuel cell (SCMFC)-type biochemical oxygen demand (BOD) sensor using carbon felt (anode) and activated sludge, and demonstrated its feasibility in the ...


    By IWA Publishing

  • Accuracy of different sensors for the estimation of pollutant concentrations (total suspended solids, total and dissolved chemical oxygen demand) in wastewater and stormwater

    Many field investigations have used continuous sensors (turbidimeters and/or ultraviolet (UV)-visible spectrophotometers) to estimate with a short time step pollutant concentrations in sewer systems. Few, if any, publications compare the performance of various sensors for the same set of samples. Different surrogate sensors (turbidity sensors, UV-visible spectrophotometer, pH meter, conductivity ...


    By IWA Publishing

  • Case study - Public-private partnership successfully tests leakwise early oil spill detection sensor in the tidal Delaware river

    Background In the summer of 2011, the Delaware River Basin Commission (DRBC) and the U.S. Geological Survey (USGS) collaborated with GE Analytical Instruments on a unique test deployment of an oil sheen sensor in the tidal Delaware River. The idea for the test deployment arose during meetings of the Delaware River and Bay Oil Spill Advisory Committee, which includes organizations and ...


    By GE Analytical Instruments

  • Multi-sensor inspection robot shows benefits of pipe penetrating radar - Case Study

    Pipe penetrating radar (PPR), the in-pipe application of ground penetrating radar (GPR) is one of the most promising quantitative pipe condition assessment technologies to emerge in recent years. With most of the underground pipe infrastructure reaching the end of their design life there is a need to provide measurable data in order to establish the extent of rehabilitation required or the timing ...


    By SewerVUE

  • Gas Detection and Monitoring Systems

    In greenhouse applications, the accurate measurement of a number of environmental parameters such as carbon dioxide concentration, temperature, light intensity, water, humidity, pH and nutrient levels using sophisticated sensors is used to create a controlled environment for optimising plant growth rates while minimising energy usage. Carbon dioxide concentration is also one of the best ...


    By Edinburgh Instruments Ltd

  • Waste Water Batch Treatment System

    Industrial Wastewater Treatment Batch Treatment Systems (BTS) are intended for lower daily volumes of wastewater typically less than 10,000 gallons per day and designed to “batch” treat wastewater from start to finish at one time. In a batch treatment system, a volume of wastewater is gathered, treated by chemical / physical / biological means, and discharged. Storage ...


    By Water Innovations, Inc

  • How long does it take to get an algae monitoring system running?

    When I buy a new piece of technical equipment for my home, I want to be able to open it up and get it running, at least the basics, in about 5 or 10 minutes. Any more than that, and I think that I’ve bought an old version of a product. Nowadays technology isn’t just better, it should also be easier to use. When you buy industrial or research equipment, the setup process is usually ...


    By Algae Lab Systems

  • Our drinking water systems are a disaster. What can we do?

    In the wake of the Flint, communities turn to innovative technology and financing to prevent the next crisis. People in developed countries turn on the tap and safe drinking water flows, a dramatic health benefit they tend to take for granted. That complacency was dramatically disrupted last year when children in Flint, Michigan, started testing positive for lead poisoning and the ...


    By Ensia

  • Continuous emission monitoring and control of packed tower odor control systems using the sycamore CEM

    ABSTRACT Packed-tower chemical scrubbers, with sodium hydroxide (caustic) and sodium hypochlorite (bleach), are commonly used to treat foul air from wastewater treatment processes. The available control mechanisms include a pH probe and controller for the sodium hydroxide feed, an oxidation reduction potential (ORP) probe with a controller toestablish the bleach feed, and proprietary ...

  • Using respirometry for energy optimization in a nitrifying biological wastewater treatment system

    Many wastewater treatment plants use more than 50% of their total energy budget in the aeration basin and, when nutrient removal is included in the activated sludge process, it is very common that the majority of oxygen uptake goes to the nitrification process. For that reason, in most wastewater treatment plants, energy optimization is focused on nitrification management. This information can be ...


    By SURCIS, S.L.

  • Project profile - McGraw Hill, East Windsor, NJ iron & manganese removal system

    Background In late 2007, AdEdge began working with Maser & Associates to assist with design and implementation of an iron and manganese removal system to serve the water supply for the McGraw Hill data center in East Windsor, New Jersey. The site had an existing groundwater supply well with unacceptably high levels of iron and manganese to serve as feed water for the facilities ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you