pipe liner Articles

  • GPR goes underground: Pipe Penetrating Radar

    Abstract: Pipe Penetrating Radar (PPR) is the underground in-pipe application of ground penetrating radar (GPR) either robotically or by manned entry to reveal wall thickness, delamination, voids, and other conditions that enable more precise determination of pipeline integrity and verifications for trenchless technology rehabilitation. PPR, when applied to pipe-bursting applications, can ...


    By SewerVUE

  • Reasons to choose Trenchless Pipe Bursting Repairing Equipment

    Trenchless technology has altered the industry, revolutionizing sewer pipe repair and gaining the favor of many property owners today. No digging, no re-landscaping, no use of chemicals- the trenchless strategy is far better than the traditional approach. In the developing business sector, pipe repair companies need the most effective equipment to stay competitive. The ...


    By TRIC Tools Inc.

  • Trouble Shooting for Trenchless Liner Installation During Sewer Line Rehabilitation

    ABSTRACTLining is being used by the utility industry as a cost effective solution to rehabilitate utility lines. Many types of liners, such as, cured-in-place-pipe (CIPP), fold and form PVC, deformed & reformed HDPE, etc., are being used to restore structural integrity of deteriorated pipes and to reduce inflow/infiltration. Most of the lining installation is carried out without any problem, ...

  • Relining with corrugated steel pipe, Mississauga, ON

    Owner: Ministry of Transportation, Ontario Consultant: Morrison Hershfield Contractor: Underground Services Limited Location: Mississauga, Ontario With over 320,000 vehicles per day the intersection of Highways 401, 403 and 410 in Mississauga, Ontario, is one of the busiest in North America. At the same location can be ...


    By Armtec

  • Bulk Storage and Piping Case Study

    Background: This major steel manufacturer was founded in 1900 in and established the first formal research department in the steel industry in 1910. It grew through the development of specialty steels and new technology. Among the many "firsts" was the development of continuous rolling technology. This company holds more U.S. patents than any other specialty steel company. ...


    By Mech-Chem Associates, Inc.

  • Comparison of dye testing and electrical leak location testing of a solid waste liner system

    Abstract: Dye tracing and electrical leak location testing were independently conducted to detect and locate leaks in the primary geomembrane liner of two cells in a municipal landfill. Despite extensive quality control and quality assurance programs, water in the leak detection zone after construction indicated that the primary liner had a leak. Fluorescein dye tests were conducted by placing a ...

  • FGD Recycle Pipe & Header - Case Study

    Project: FGD RECYCLE PIPE & HEADER Client: A U.S. coal-fired power plant General Scope: 76” diameter recycle pipe system Engineering/Procurement: Advatech LLC. Resin & Laminate Construction: Hetron 922 vinyl ester was selected for the service. All pipe had an interior ...


    By Fibrex Corporation

  • World`s Largest Pipe Contract Awarded to Fabricated Plastics for Expansion of Petrochemical Complex in Texas

    When Fabricated Plastics Limited of Maple, Ont., was given the contract to supply all the piping required for the expansion of a plastics resin plant in southern Texas, it proved to be the largest single pipe contract ever awarded. In terms of variety of pipe and chemical service requirements, it was also one of the most complicated and demanding, with different molded laminates and pipe lining ...


    By Fabricated Plastics Limited

  • Failing Brine Piping Replaced at World`s Largest Ion Exchange Membrane Plant

    Fabricated Plastics Limited is headquartered in Maple, Ontario, located on the northern outskirts of Toronto. One of North America's largest custom composite and dual laminate fabrication companies. Fabricated Plastics is dynamic, energetic, creative and resourceful. Engineering design, problem solving and fabrication are world class with the result that Fabricated Plastics is frequently invited ...


    By Fabricated Plastics Limited

  • Multi-sensor inspection robot shows benefits of pipe penetrating radar - Case Study

    Pipe penetrating radar (PPR), the in-pipe application of ground penetrating radar (GPR) is one of the most promising quantitative pipe condition assessment technologies to emerge in recent years. With most of the underground pipe infrastructure reaching the end of their design life there is a need to provide measurable data in order to establish the extent of rehabilitation required or the timing ...


    By SewerVUE

  • Ultra violet light cured fiberglass CIPP resolves extreme rehab conditions

    This paper describes both a specific wastewater rehab project using ultra violet light cured fiberglass CIPP liner and also the advantages that this technology brings to the industry over the current technology of choice used in CIPP within the Untied States. The project was completed in Coronado, CA for the City of Coronado by International Pipe Lining Technologies, ...

  • Slurry Lagoon Mountmellick - case study

    Lining Tech have completed lining works to construct a cost efficient 1,000,000 gallon geomembrane lined slurry lagoon in Mountmellick, County Laois. Works included the installation of a 2.5mm smooth HDPE liner in accordance with the Department of agriculture's specification S126 for geomembrane lined slurry lagoon. Works also included the fabrication and sealing of five pipe boot details around ...

  • Great Island Tank 4 and bund refurbishment - case study

    Lining works to refurbish the existing tank farm secondary containment bund and HFO Tank 4 are ongoing at Great Island CCGT project. Lining Tech are contracted in to Balfour Beatty Ireland on this design and build project for the client Tank 4 Works Installation of 1,140m2 of 1mm HDPE leak detection liner to the floor of HFO tank 4 Fabrication and installation ...

  • Impact-Echo Response of Hollow Cylindrical Concrete Structures Surrounded by Soil and Rock: Part I—Numerical Studies

    The studies summarized in this paper and the following paper in this issue demonstrate that the impact-echo method can be used for integrity testing of concrete pipes, mine shaft liners, and tunnel liners in contact with soil or rock. Results obtained from numerical (finite element) studies are presented in this paper (Part I), and results obtained from experimental studies on mine shaft liners ...


    By ASTM International

  • Radius Systems’ bespoke engineered PE Systems bring cost savings and environmental benefits to water customers

    Radius Systems are currently supplying innovative pipeline solutions for two large diameter water projects: a new hydro electricity scheme in Gerlan, North Wales and the rehabilitation of a large diameter pipeline in the Severn Trent Water area. Working together with the Derwent Hydro project team to develop an optimised system for the new hydro electricity pipeline in Gerlan, Radius Systems are ...


    By Water Active Ltd

  • Tonabrocky reservoir roof lining - case study

    Geosythetic lining works include the installation of a 1,825m2 of 1.5mm smooth HDPE liner over the concrete roof of one existing and one new reservoir. Works included Fusion and extrusion welding techniques Sealing of HDPE liner to vertical concrete surface of 6nr. access hatches  using a stainless steel battening system Fabrication and sealing of 16 nr. pipe boots around ...

  • Heap leach drainage design

    Heap leach operations have gained popularity in the past around the world as a reasonable method for extracting metals such as gold, copper, and nickel from earth material. In such heap operations, however, the success of the leaching operation depends on the flow regime established by the sprinklers at the top of each lift and the drainage system at the bottom.Each lift represents a unique ...


    By SoilVision Systems Ltd.

  • FGD Spray Headers - Case Study

    Project: FGD SPRAY HEADERS Client: U.S. coal-fired power plants General Scope: A total of fifteen spray headers for three identical absorbers and six spray headers for a larger absorber. Engineering/Procurement: Babcock Power Environmental Inc. Resin & Laminate Construction: Hetron 922 vinyl ...


    By Fibrex Corporation

  • REDmeters - Blue Paper

    REDmeters: Abstract The process of controlling and the cost of monitoring slurries in many industries are normally accomplished using various continuous mass flow systems. These types of systems usually contain a magnetic flow meter and a line density meter. There is inherent cost associated to these systems due to the inaccurate nature of these meters. Some meters on the market boast up to ...


    By REDmeters

  • The quick and easy solution for pond leaks

    Are you tired of trying to fix that pond leak. Tried product after products For over 30 years ponds and fountains have been coated with epdm liners and have been seen as the only solution for pond repair. Many people are not aware that there is a liquid version of epdm rubber that has been specially formulated for fish friendly ponds. This one coat application has been the solution for thousands ...


    By Pondpro2000

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you