plastic extruder Articles

  • Plastics case study - Rensselaer

    Cutting Corners is Easy with New Elbow Design for Piping A simple and inexpensive upgrading of the pneumatic conveying system at the Rensselaer Plastics Co., Rensselaer, IN., is reducing maintenance while saving the company money in a number of ways. Rensselaer Plastics Co. specializes in PVC piping products for the plumbing trade. Annual sales of the company are in the ...


    By HammerTek Corporation

  • Blazing the plastics recycling trail

    In the past year, MBA Polymers has opened two facilities showcasing its high-tech recycling process for plastics from end-of-life durable goods. Those plants, in China and Austria, are just the beginning for this plastics recycling pioneer; over the next two years, the company is hoping to announce at least one additional facility in Europe as well as the development of another operation in Asia. ...


    By Recycling International

  • Plastics case study - RheTech

    RheTech found that HammerTek Smart Elbows could convey highly abrasive finished product with few signs of wear after a year in service. The sweeps previously used lasted only three or four months. RheTech, Inc. of Whitmore Lake, Michigan, a designer, manufacturer and marketer of proprietary thermoplastic polyolefin alloys and compounds uses such additives as minerals, fiber reinforcements and ...


    By HammerTek Corporation

  • Plastics case study - Acro

    Smart Elbow® solves plastics problem Subject ACRO Extrusion Corporation's Wilmington, DE plant. Situation Stainless steel sweep elbows were wearing through at ACRO Extrusion Corporation, causing considerable downtime, product loss, and maintenance expense. The sweep elbows in their pneumatic conveying system were ...


    By HammerTek Corporation

  • Plastic Recycling Process

    Plastic recycling is the process of recovering scrap or waste plastics and reprocessing the material into useful products, sometimes completely different in form from their ...


    By Harden Industries Ltd.

  • Recycling of Pre-consumer Plastic Film

    Untitled Document ...


    By Shred-Tech Corp.

  • Coating of Plastic Granules - case study

    In order to increase the production output of extruders and injection moulding machines, the flow and processing characteristics of plastic granules have to be modified. Especially for polyamides (PA) and polystyrene (PS) this occurs by means of powdering (coating) with powder additives. In doing so, two different methods are common. The pure dry mixing of plastic granules with the powder ...


    By AVA - Huep GmbH u. Co. KG

  • Operator Strategies : Sorting Out the Plastic

    BETTER BUGS Ideas and products in the Better Bugs category attempt to affect the biological components and biochemistry of processes by altering the mix of microorganisms or enzymes present. After all, biology is the foundation of many, if not most, organics recycling systems. Pyrophiles: The first example of Better Bugs involves pyrophilic organisms, bugs that can take the heat. This example is ...


    By BioCycle Magazine

  • Plastic Recycling in beautiful South Carolina case study

    Palmetto Synthetics currently manages multiple production lines at their Kingstree, South Carolina facility. With their in-house equipment, Palmetto Synthetics has the capability to produce specialty fibers from 1.5 to 2000 denier with greater efficiency and consistency. Having such specialized equipment enables Palmetto Synthetics the opportunity to custom design the right fiber type, right ...


    By WEIMA

  • How to build waste plastic pyrolysis plant

    Preparation of raw material: The raw material can be waste tire, tyre, plastic or scrap rubber. All if the above wastes can be processed by our machine. The following are details: Separate the ingredient which can not be refined from waste plastic, such as: soil, wood, stone, brick etc. If the raw materials are paper mill’s waste, separate the pulp. If there is water in raw material, should ...


  • A world first for plastic sorting thanks to TOMRA Sorting UK

    Overview In late 2010, ECO Plastics issued TOMRA Sorting UK (TOMRA) with one of the most demanding sorting challenges it had ever encountered. In order to supply a large independent bottler with recycled plastic for all its plastic packaging in the UK, ECO Plastics needed to provide a consistent supply of super-clean recycled PET (rPET) flakes to a level that had never been achieved before. ...


    By TOMRA Sorting (TITECH)

  • Plastics pellet manufacturer eliminates blend problems with uniquely designed rotary blender

    Having no internal moving elements, blender achieves 100% discharge eliminating process problems. To remain competitive in a widening world economy, manufacturers have to provide quality products at world market competitive prices. This has forced American manufacturers to rethink their approach to manufacturing. Particularly, rethink the cost effectiveness of their ...

  • Sorting of PET flake by material & color simultaneously at ECO Plastics, UK case study

    In late 2010, ECO Plastics issued TOMRA Sorting UK with one of the most demanding sorting challenges it had ever encountered. In order to supply a large independent bottler with recycled ...


    By TOMRA Sorting (TITECH)

  • World`s Largest Pipe Contract Awarded to Fabricated Plastics for Expansion of Petrochemical Complex in Texas

    When Fabricated Plastics Limited of Maple, Ont., was given the contract to supply all the piping required for the expansion of a plastics resin plant in southern Texas, it proved to be the largest single pipe contract ever awarded. In terms of variety of pipe and chemical service requirements, it was also one of the most complicated and demanding, with different molded laminates and pipe lining ...


    By Fabricated Plastics Limited

  • Landfill clearance

    Selling 8,000 pieces of furniture each day means the folks at Raymour & Flanigan Furniture have to contend with packaging for 8,000 pieces of furniture each day. And that's a whole lot of cardboard, plastic and polystyrene. But the Liverpool, N.Y.-based retailer has been aggressively tackling its waste streams in recent years and just added a new program to handle the large amount of ...


    By RecycleTech, Corp.

  • From macroplastic to microplastic: Degradation of high‐density polyethylene, polypropylene, and polystyrene in a salt marsh habitat

    As part of the degradation process, it is believed that most plastic debris becomes brittle over time, fragmenting into progressively smaller particles. The smallest of these particles, known as microplastics, have been receiving increased attention because of the hazards they present to wildlife. To understand the process of plastic degradation in an intertidal salt marsh habitat, strips ...


    By John Wiley & Sons, Ltd.

  • New for old – the film cycle case study

    Plastic belongs, among glass, paper and aluminum, to the most common materials when it comes to recycling. Hammerl, headquartered in Gemmrigheim (Germany) proves impressively how profitable and resource-friendly it is to recover PE film. For a year now, the company is capable of producing its own PE granulate from film scrap by using the most modern size reduction equipment. This granulate can ...


    By WEIMA

  • 1st Tech applications range case study

    Paper industry: roller, air compressor, after cooler, calender bowl, chemical scrubber, closed cooling system, condenser, cooling tower, gas cooler, heat exchanger, intercooler, filtrate tank, filtrate pipe, vacuum filter, vacuum pump, slush pump, lime pump, evaporimeter, digester, scrubber, flow box, squeezer, indirect cooler, absorption plant, gas steam room, steam ...


    By Mibo International Corp.

  • The Magnetic Duo

    (From Resource Recycling) The combination of high gradient magnetic separation using rare earth roll magnets and eddy current separation has proved to reliably remove aluminum flakes mixed with PET. Recycling of plastic beverage containers made from polyethylene terephthalate (PET) has been a growth industry for the past two decades. Recycled PET can be used in such diverse products as ...

  • ARCO Chemical - Case Study

    Custom Designed Furnace Reclaims $100,000 Condenser PCPC burn-off oven removed 4,240 lbs. of styrene polymer in compliance with local environmental laws. The Problem: ARCO Chemical Company's Beaver Valley plant in Monaca, PA, a manufacturer of styrene-based plastics, was experiencing severe problems and expense with the periodic cleaning of their ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you