plastic piping Articles

  • Sanitary Fittings for Plastic and Polypropylene Pipes

    Fittings for metal-plastic pipes have the same function as fittings for metal pipes. To connect them to the pipes, a collet is used. They can also be transitional from a collet to a threaded joint, for joining metal-plastic pipes and metal pipes. One of the most reliable connections for metal-plastic pipes is a press connection (press-fitting compound). It is achieved by ...


    By Adamant Valves

  • plastic pipe fitting mold technology

    “ Forever care you, care your molds”, is our insist mentality philosophy. We insist on mold construction design and steel quality, believe these two factors are main points to achieve mold with excellent performance. produces moulds for PVC ...


    By Focare Mould Co.,Ltd.

  • Pioneering Primer from Plastics Pipe Institute

    With administrative offices located in Dallas, Texas, The Plastics Pipe Institute Inc. (PPI) is the major trade association representing all segments of the plastics piping industry. PPI members share a common interest in broadening awareness and creating opportunities that expand market share and extend the use of plastics pipe in all its many applications. As an association, PPI focuses ...


    By Tric Tools, Inc.

  • Organic compounds migrating from plastic pipes into water

    Case studies were carried out to identify potential chemical contaminants migrating to drinking water from polyvinyl chloride (PVC) or polyethylene (PE) pipes, available on the Polish market. Analyses were carried out by gas chromatography (GC) coupled with mass spectrometry (MS). Analysis of organotin compounds in water in contact with PVC pipes from different manufacturers found variability: ...


    By IWA Publishing

  • What’s in those new plastic pipes delivering drinking water?

    Lingering questions leave some concerned about a new generation of plumbing material The calls and e-mails arrive as often as several times a week from people with concerns about drinking water. Some of the callers — who include homeowners, architects and builders — want to know why their water smells like gasoline. Others want to know which kinds of pipes to ...


    By Ensia

  • Custom Pressurized Plastic Pipe Disposal Solution - Case Study

    Problem A large petro chemical company asked Waste Control Systems to solve a problem of pressurized plastic pipe after it had been tested for bursting strength. The QA test consisted of taking an eighteen inch section of pipe and welding caps on each end. One cap was solid and the other consisted of a fitting to allow air to be pumped into the section of pipe. A check valve was ...


    By Waste Control Systems Inc

  • Plastic Recycling Process

    Plastic recycling is the process of recovering scrap or waste plastics and reprocessing the material into useful products, sometimes completely different in form from their ...

  • The search for sustainable plastics

    As petroleum-based polymers foul our oceans and litter our lives, researchers seek more environmentally friendly ways to meet demand for durable, versatile materials. The fate of the world’s oceans may rest inside a stainless steel tank not quite the size of a small beer keg. Inside, genetically modified bacteria turn corn syrup into a churning mass of polymers that can be ...


    By Ensia

  • World`s Largest Pipe Contract Awarded to Fabricated Plastics for Expansion of Petrochemical Complex in Texas

    When Fabricated Plastics Limited of Maple, Ont., was given the contract to supply all the piping required for the expansion of a plastics resin plant in southern Texas, it proved to be the largest single pipe contract ever awarded. In terms of variety of pipe and chemical service requirements, it was also one of the most complicated and demanding, with different molded laminates and pipe lining ...


    By Fabricated Plastics Limited

  • Effect of Rib Spacing on Deformation of Profile-Wall Plastic Pipes Buried in Coarse Granular Backfill

    Several different types of plastic pipe products were instrumented, buried in coarse granular backfill, and subjected to monotonic, distributed load in the field. During each field test, data were recorded from strain gages, linear variable differential transformers, and earth pressure cells by computerized data acquisition units.Review of the deflection data from 14 tests revealed a pattern on ...


    By ASTM International

  • Plastics case study - RheTech

    RheTech found that HammerTek Smart Elbows could convey highly abrasive finished product with few signs of wear after a year in service. The sweeps previously used lasted only three or four months. RheTech, Inc. of Whitmore Lake, Michigan, a designer, manufacturer and marketer of proprietary thermoplastic polyolefin alloys and compounds uses such additives as minerals, fiber reinforcements and ...


    By HammerTek Corporation

  • Plastics case study - Rensselaer

    Cutting Corners is Easy with New Elbow Design for Piping A simple and inexpensive upgrading of the pneumatic conveying system at the Rensselaer Plastics Co., Rensselaer, IN., is reducing maintenance while saving the company money in a number of ways. Rensselaer Plastics Co. specializes in PVC piping products for the plumbing trade. Annual sales of the company are in the ...


    By HammerTek Corporation

  • FLOTTWEG SORTICANTER® for Plastic recycling

    How many times each day do you use something made out of plastic? From a toothbrush to a soda pop bottle, from a grocery bag to a garden hose, plastics are part of our daily life. Needless to mention the huge amount of waste plastics generated in the industry. You probably know that plastics are made from petroleum, a non-renewable resource. When plastics are thrown away, they become part of the ...


    By Flottweg SE

  • Industrial Plastic Film Shredder for PE and PP Plastic Film

    Industrial Plastic Film Shredder for Polyethylene and Polypropylene Plastic Film Our economy cannot do without plastic, but its disposal is one of the problems that private industries, nations and consumers can no longer afford to sweep under the carpet. Or dump into rivers and seas. Ocean pollution requires a strong global response. This is one of the great challenges of our ...


    By SatrindTech Srl

  • pipe fitting mold, irrigation piping system, irrigate fitting mould

    China pipe fitting mold, pipe fitting mould, mould, mold, moulds, molds, tool, plastic mould, plastic mold, injection mould, injection mold, pipe mould, pipe mold, fitting mould, fitting mold, PVC mold, PVC mould, PVC pipe mold, PVC pipe mould, PVC fitting mould, PVC fitting mold, PVC pipe fitting mold, PVC pipe fitting mould, PVC collapsible core, PVC ...


    By Focare Mould Co.,Ltd.

  • PVC Pipe Fitting Molding Machines

    1.Specialized PVC plasticization components, hard chrome plated screw, nozzle(with enlarged nozzle hole), and nozzle flange are adopted to ensure the quality of PVC production and extend the life of the mechnaical parts. All the components are highly anticorrosive. 2.Widened safety door design, equiped with double core pulling devices(each one has two inputs and two ...


    By Focare Mould Co.,Ltd.

  • Plastics case study - Schmalbach-Lubeca

    Schmalbach-Lubeca operates 24 hours a day, 7 days a week, manufacturing millions of plastic bottles each day for the beverage industry. With a total of 63 plants worldwide, 17 locations are within the United States. The Blythewood, South Carolina location was using long radius elbows to convey PET Poly Pellets from the rail car to the silo, and from the silo to the molding operation. "Streamers" ...


    By HammerTek Corporation

  • ERGELIT tape - impact protection for pipes

    The ERGELIT tape – a safe protection for steel, cast iron, cement and plastic pipes! Processing: Put the tape into water, surplus water express and put the tape around the piping immediately. Render the withdrawing ERGELIT mortar. A further subsequent treatment is not necessary any longer. After approx. 1 hour a sufficient strength is achieved. Due to the ...


    By HERMES Technologie Ltd.

  • Locating pipes and cables case study

    GPR can be used to determine the location and depth of metallic, non-metallic, plastic, concrete and asbestos-concrete utilities, and cables (power, signal, etc.) Locating of  City Utilities The VIY3-300 GPR was used for locating of city utilities (water, gas, sewer, etc.). This profile shows city utilities at a depth of 1.2 and 2.0 meters (wave speed is 130 meters per ...


    By Transient Technologies LLC

  • Operator Strategies : Sorting Out the Plastic

    BETTER BUGS Ideas and products in the Better Bugs category attempt to affect the biological components and biochemistry of processes by altering the mix of microorganisms or enzymes present. After all, biology is the foundation of many, if not most, organics recycling systems. Pyrophiles: The first example of Better Bugs involves pyrophilic organisms, bugs that can take the heat. This example is ...


    By BioCycle Magazine

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you