plastic piping installation Articles

  • Bollard Installation

    Sustained health and safety of the human population requires that remediation systems be set up to take care of high levels of contaminants in water bodies, soil groundwater or other locations as deemed fit. Environmental construction companies are frequently called up on for this purpose. Need for Bollard InstallationExecution of the remediation strategy may involve excavation, concrete coring, ...

  • What’s in those new plastic pipes delivering drinking water?

    Lingering questions leave some concerned about a new generation of plumbing material The calls and e-mails arrive as often as several times a week from people with concerns about drinking water. Some of the callers — who include homeowners, architects and builders — want to know why their water smells like gasoline. Others want to know which kinds of pipes to ...


    By Ensia

  • Plastics case study - RheTech

    RheTech found that HammerTek Smart Elbows could convey highly abrasive finished product with few signs of wear after a year in service. The sweeps previously used lasted only three or four months. RheTech, Inc. of Whitmore Lake, Michigan, a designer, manufacturer and marketer of proprietary thermoplastic polyolefin alloys and compounds uses such additives as minerals, fiber reinforcements and ...


    By HammerTek Corporation

  • Plastics case study - Rensselaer

    Cutting Corners is Easy with New Elbow Design for Piping A simple and inexpensive upgrading of the pneumatic conveying system at the Rensselaer Plastics Co., Rensselaer, IN., is reducing maintenance while saving the company money in a number of ways. Rensselaer Plastics Co. specializes in PVC piping products for the plumbing trade. Annual sales of the company are in the ...


    By HammerTek Corporation

  • World`s Largest Pipe Contract Awarded to Fabricated Plastics for Expansion of Petrochemical Complex in Texas

    When Fabricated Plastics Limited of Maple, Ont., was given the contract to supply all the piping required for the expansion of a plastics resin plant in southern Texas, it proved to be the largest single pipe contract ever awarded. In terms of variety of pipe and chemical service requirements, it was also one of the most complicated and demanding, with different molded laminates and pipe lining ...


    By Fabricated Plastics Limited

  • Plastics case study - Schmalbach-Lubeca

    Schmalbach-Lubeca operates 24 hours a day, 7 days a week, manufacturing millions of plastic bottles each day for the beverage industry. With a total of 63 plants worldwide, 17 locations are within the United States. The Blythewood, South Carolina location was using long radius elbows to convey PET Poly Pellets from the rail car to the silo, and from the silo to the molding operation. "Streamers" ...


    By HammerTek Corporation

  • Latest CDE plant installed in Trinidad

    In November 2006 a CDE Sand Washing Plant was installed with the Sampete Group based in Wallerfield Armia, Trinidad. Before this installation the raw material had been stockpiled as waste, compromising the efficiency of several limestone quarries in the east. It provided a considerable challenge for traditional systems as it is overburden mixed with clay-bound material which is extremely plastic ...


    By CDEnviro

  • Economical: Two-Stage Grinding of Valuable Plastic Waste

    Until now large cutting mills with high drive performances have been used for the single-stage crushing of large and heavy pipes, bulk plastic products etc. This leads to high investment volume, high sound emissions, frequent blade changes, high energy and personnel costs, among other things. On the other hand, two-stage crushing enables plastic processing companies to economically process ...


  • Plastic bottle sorting/processing at Hemswell in Lincolnshire, UK

    AWS Eco Plastics Limited is a specialist reprocessing company serving customers in the UK and Ireland. In 2006, reacting to sutained growth, AWS opened the UK's largest and most technically advanced plastic bottle sorting/processing plant, located at Hemswell in Lincolnshire. TITECHnolgy was the basis for most of the automated sorting equipment used at the Hemswell site. An expansion took place ...


    By TOMRA Sorting GmbH.

  • Experimental characterization of PVC-O pipes for transient modeling

    The increasing use of plastic materials has modified several aspects of design and management of water distribution systems. With reference to the numerical modeling of transients, the definition of a correct rheological model of the pipe material is receiving an increasing interest. In this paper the behavior of the molecularly oriented polyvinyl chloride (PVC-O) pipes during transients is ...


    By IWA Publishing

  • Care and Handling of Advanced Enviro - Septic ™ Pipe

    Advanced Enviro-Septic™ (AES) is made entirely of durable, non-biodegradable plastic and geotextile fabrics, which enables the pipes to be lightweight and flexible for ease of transport and installation. This also extends system life, since there is nothing to break down or wear out once the system is properly installed. Although the AES is lightweight, the pipe is designed to withstand H20 ...

  • Shredder for solid and thick-walled profiles and pipes

    NEUE HERBOLD Maschinen- und Anlagenbau GmbH, Sinsheim, (www.neue-herbold.com), extends their machinery range by a new 4-shaft shredder with force feeding system. The 4-shaft shredder type HZR 1300/4 is able to size-reduce solid chunks and start-up lumps, as well as thick-walled profiles and pipes up to a diameter of 1200 mm x 1200 mm and up to a length of 6000 mm. The size ...

  • How to Repair Pipes Quickly with Minimal Service Disruption

    If this has not yet happened to you, it will. The time is 5:30 a.m. and your guests are just beginning to wake when you get an emergency call informing you that a pipe has sprung a leak. What are your options? Will you shut down the water for a few hours, leaving your guests without water to brush their teeth, take their showers, or flush the commodes while you cut out and replace the bad ...


    By InduMar Products, Inc.

  • Recycling all kinds of plastic waste: Lindner‘s tailor-made re-grinding line boosts output and growth for Winco Plastics - Case Study

    Winco Plastics, North Aurora, IL/USA, a subdivision of Winco Trading (is one of the largest full service plastic recycling companies in the Midwest with 30 years’ experience. After purchasing a Lindner re-grinding line including a Micromat Plus 2500 pre-shredding system and an LG 1500-800 grinder, Winco have significantly increased their plastics waste handling capacity, making them one of ...


    By Lindner-Recyclingtech GmbH

  • STOP IT Pipe Repair System helps keep companies on line - Case Study

    Since 1986, InduMar Products Inc. has provided a unique solution for the fluid processing industries with the STOP IT Repair System. Refineries, chemical plants, pulp and paper mills and the mining industry all have pipes carrying products that are often highly flammable, toxic or corrosive and the STOP IT system provides a method to restore product and profit flow in minutes instead of the many ...


    By InduMar Products, Inc.

  • Successful trunk main correlations in Australia, the land of long pipes - Case study

    The Aquasscan TM Successfully locates leaks at distances over 1KM in Sydney. The Gutermann Aquascan (Trunk Main) correlator provided a series of high performance correlations in trials performed in Sydney, Australia.  Sydney Water provided a 1.2 KM of 600mm OD Steel trunk main for a series of tests to be performed to evaluate the performance.  The testing was administered by ...


    By Gutermann AG

  • IPEX Guardian Double Containment Piping System ensures safe transport of untreated frac water at CAES facility - Case Study

    Ajoint venture between ACI Energy, Inc., an investment holding company, and Altela, Inc., a water desalination company, Clarion Altela Environmental Services (CAES) opened in November 2012 to recycle frac water * from the Marcellus and Utica Shale Basins, which stretch across much of Pennsylvania and Ohio. The CAES facility treats the frac water and ultimately turns it into clean distilled water ...


    By IPEX

  • Failing Brine Piping Replaced at World`s Largest Ion Exchange Membrane Plant

    Fabricated Plastics Limited is headquartered in Maple, Ontario, located on the northern outskirts of Toronto. One of North America's largest custom composite and dual laminate fabrication companies. Fabricated Plastics is dynamic, energetic, creative and resourceful. Engineering design, problem solving and fabrication are world class with the result that Fabricated Plastics is frequently invited ...


    By Fabricated Plastics Limited

  • A housing made of ductile iron GGG-40. The oneThe perfect solution for PE/PP piping systems

    It is common practice to chamfer the standard butt fusion around the diameter of the entrance during the installation of standard butterfly valves in plastic piping, so that the disc does not strike the pipe interior and can open completely (Picture 1). A compromise one does not have to accept when mounting the butterfly valve of type Z 414-A or Z 411-A. The DVS (German Welding Association) ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you