plastic recycling machine Articles

  • Recycling plastics with magnets

    (from Machine Desgin)   Many plastics manufacturers use processes like sequential 3D blow-in molding and two-shot injection molding, but they create a ...


    By Eriez Magnetics Europe Ltd

  • Recycling of Pre-consumer Plastic Film

    Untitled Document ...


    By Shred-Tech Corp.

  • Action Recycling-Milwaukee Plastic Sorting case study

    Customer Action Recyclers is a rapidly growing recycling company in Milwaukee which was founded in 2005. The company now employs    more than 30 employees and owns several recycling centres. Requirements PET and PE are to be recycled from a mixed fraction (60% PE/PET and 40% other materials such as other plastics, wood, paper, etc) with a grain size ...

  • Waste plastic recycling plant with high technology

    Company Profile: Waste plastic pyrolysis plant, with the superiority of low capital investment and high fuel financial price, it has become the first preferred waste disposal method in many countries.This profitable project was established every week with low labor costs and high profits. Huayin renewable energy equipment company, established in 1993,have been a leader of oil pyrolysis ...


  • Plastics Recycler Increases Capacity with WEIMA Shredder

    Aqua Plastics, Inc., a plastic recycler located in Hickory, North Carolina, integrated a WEIMA WL(K) 15 into their recycling line in 2006. Since then, they have experienced the benefits of a high-quality shredder that can process a wide variety of plastic scrap in large volumes. A WEIMA WL(K) 15 shredder was installed at the front of the recycling line from the beginning. It wasn’t until ...


  • Plastic Recycling in beautiful South Carolina case study

    Palmetto Synthetics currently manages multiple production lines at their Kingstree, South Carolina facility. With their in-house equipment, Palmetto Synthetics has the capability to produce specialty fibers from 1.5 to 2000 denier with greater efficiency and consistency. Having such specialized equipment enables Palmetto Synthetics the opportunity to custom design the right fiber type, right ...


    By WEIMA

  • Hanbury Plastic Recycling – Stoke on Trent, UK case study

    CUSTOMER HPR Limited creates high quality plastic feedstock materials, by sorting co-mingled commercial, industrial and post-consumer waste into separated polymer streams of high purity since 2011. HPR Limited process 40,000 tonnes/year of mixed kerbside collected plastic material. SITUATION HPR were looking for a solution to sort efficiently ...

  • Tailor-made washing lines for wet recycling of conterminated plastics

    NEUE HERBOLD Maschinen- und Anlagenbau GmbH, located in Sinsheim/Germany manufactures and sells complete washing lines for the recycling of plastics waste. Prior to re-pelletizing the plastic waste must be size reduced, washed and if necessary foreign materials separated. ...

  • CANDI Plastic opts for new QR-class for material recycling

    First real-life application for the UNTHA QR-class: In July this year, CANDI Plastic Recycling began using a QR1700 shredder for ...


    By UNTHA Shredding Technology

  • Plastics recycler increases capacity with WEIMA shredder case study

    Aqua Plastics, Inc., a plastic recycler located in Hickory, North Carolina, integrated a WEIMA WL(K) 15 into their recycling line in 2006. Since then, they have experienced the benefits of a high-quality shredder that can process a wide variety of plastic scrap in large volumes. A WEIMA WL(K) 15 shredder was installed at the front of the recycling line from the beginning. It wasn’t until ...


    By WEIMA

  • Taylor made washing lines for wet recycling of conterminated plastics

    NEUE HERBOLD Maschinen- und Anlagenbau GmbH, located in Sinsheim/Germany manufactures and sells complete washing lines for the recycling of plastics waste. Prior to re-pelletizing the plastic waste must be size reduced, washed and if necessary foreign materials separated. NEUE HERBOLD washing lines, produce granules or flakes with a high quality even at today's ...

  • Baler initiated recycling program at Donson Machine - Case Study

    Donson found a cleaner and more economic way to dispose of their waste, when buying af baler for cardboard and plastic waste. Donson Machine purchased a Bramidan B30 W baler when they looked for a better solution for their waste disposal. The vertical baler provided them with a resolution that saves both time and money. Placed in Alsip outside Chicago, Donson Machine is a manufacturer of ...


    By Bramidan Balers

  • Operator Strategies : Sorting Out the Plastic

    BETTER BUGS Ideas and products in the Better Bugs category attempt to affect the biological components and biochemistry of processes by altering the mix of microorganisms or enzymes present. After all, biology is the foundation of many, if not most, organics recycling systems. Pyrophiles: The first example of Better Bugs involves pyrophilic organisms, bugs that can take the heat. This example is ...


    By BioCycle Magazine

  • Axion waste processing plant training case study 4 – New operators on an established plastics recycling plant

    Training a team of new operators on an established waste polymer processing plant following extensive modifications to the process. Challenge: Not all of the new machinery had been installed. The separation and refining equipment used complex processing techniques not widely used in the sector. The trainees were new recruits with no prior knowledge of ...

  • Jasar Recycling - PET deliquifying

    Jasar Recycling installed a new Runi SK-370 Deliquifying Compactor for their East Palestine, OH location. “We are very happy with the RUNI SK 370 PET Deliquifying system. Right now, we are running the machine in two shifts and the machine is keeping up with all of our plastic material. The nicest feature about the RUNI is that there is barely any maintenance on the system. The RUNI ...


    By RUNI A/S

  • Start recycling PET strap

    Sweed has taken the design of their standard Model 450 Scrap Chopper and improved it to be faster and more powerful. This chopper is becoming a staple for companies processing large amounts of plastic or PET banding; many of them have the Turbo located at each receiving area (or other places in the plant where the plastic banding is generated). This new high-speed version is known as the Model ...


    By Sweed Machinery, Inc.

  • How to build waste plastic pyrolysis plant

    Preparation of raw material: The raw material can be waste tire, tyre, plastic or scrap rubber. All if the above wastes can be processed by our machine. The following are details: Separate the ingredient which can not be refined from waste plastic, such as: soil, wood, stone, brick etc. If the raw materials are paper mill’s waste, separate the pulp. If there is water in raw material, should ...


  • Recycling Balers And Types

    Recycling balers are an important asset to the recycling efforts. There are several different kinds of balers that can be used depending on the purpose and type of material that need to be recycled. It is important to not only learn about the different types of balers, but also to understand their functioning.  What ...

  • The rise of the Fuxing recycling empire

    Yulin Wang is a typical example of the new generation of young but passionate Chinese entrepreneurs. In just 10 years, he has built something of a recycling empire comprising plastics, paper and metals interests. His Hangzhou Fuxing group of companies has its headquarters in the Chinese town of Hangzhou but also operates plants in Europe and Turkey. The word ‘workaholic’ could have been invented ...


    By Recycling International

  • Recycle Pallet Molding technology

    *Recycle Pallets Molds Design Analysis.When we received the customer Pallets design, we will gather all the related technical people to analysis the mold design first like demolding draft angle, strength, melt filling, deformation, thickness…and make mold flow analysis. After the design initially confirmed, we will have a technical meeting again to discuss all the plastic pallets molds ...


    By Focare Mould Co.,Ltd.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you