plastic recycling plant Articles

  • Reliability and prepress technology deciding factors when Stena Recycling chose Presona

    Stena Recycling in Kristianstad, Sweden, is featuring a new Presona LP 100 DH4S baler, increasing its baling capacity and ensuring production with a minimum of stoppages. Stena Recycling’s Kristianstad facility is one of the company’s 165 recycling plants in Sweden, Norway, Denmark, Finland and Poland and manages a wide variety of materials from municipal and business ...


    By Presona AB

  • Waste plastic recycling plant with high technology

    Company Profile: Waste plastic pyrolysis plant, with the superiority of low capital investment and high fuel financial price, it has become the first preferred waste disposal method in many countries.This profitable project was established every week with low labor costs and high profits. Huayin renewable energy equipment company, established in 1993,have been a leader of oil pyrolysis ...


  • Blazing the plastics recycling trail

    In the past year, MBA Polymers has opened two facilities showcasing its high-tech recycling process for plastics from end-of-life durable goods. Those plants, in China and Austria, are just the beginning for this plastics recycling pioneer; over the next two years, the company is hoping to announce at least one additional facility in Europe as well as the development of another operation in Asia. ...


    By Recycling International

  • Plastic Recycling Process

    Plastic recycling is the process of recovering scrap or waste plastics and reprocessing the material into useful products, sometimes completely different in form from their ...


    By Harden Industries Ltd.

  • Recycling Options for Mixed Plastics in Automotive Shredder Residues

    Waste production (ASR) from shredding of automobiles is a major global problem. The current method of disposal via landfilling is unacceptable due to environmental concerns and high cost. This project focuses on the evaluation of competing technologies for recycling automotive shredder residues and in helping solve this industrial problem by analyzing feasible solutions for implementation. The ...


  • Environmentally Friendly Recycling Process for Plastics and Rubber Recovery

     Abstract A quantized converter of the potential energy of a fluid or a free-flowing mass located in a natural or an artificial storage, which should always be situated at a higher level than the aforementioned converter in the accepted geodesic coordinate system. In contrast to the known converters, such as the water runner (turbine), operating in continuous regime and transforming ...


  • Chemical Recycling of Plastics Waste (PVC and other resins)

     Introduction For several years, debate has raged about the plastic PVC. Industry and environmentalists contend with each other virtually around the world. The environmentalists pursue a ban, industry aims to improve its environmental performance and believes that from an overall viewpoint there is no reason for such far-reaching measures against their material. In this context, the material ...


  • Axion waste processing plant training case study 4 – New operators on an established plastics recycling plant

    Training a team of new operators on an established waste polymer processing plant following extensive modifications to the process. Challenge: Not all of the new machinery had been installed. The separation and refining equipment used complex processing techniques not widely used in the sector. The trainees were new recruits with no prior knowledge of ...

  • Plastics Recycler Increases Capacity with WEIMA Shredder

    Aqua Plastics, Inc., a plastic recycler located in Hickory, North Carolina, integrated a WEIMA WL(K) 15 into their recycling line in 2006. Since then, they have experienced the benefits of a high-quality shredder that can process a wide variety of plastic scrap in large volumes. A WEIMA WL(K) 15 shredder was installed at the front of the recycling line from the beginning. It wasn’t until ...


  • How to build waste plastic pyrolysis plant

    Preparation of raw material: The raw material can be waste tire, tyre, plastic or scrap rubber. All if the above wastes can be processed by our machine. The following are details: Separate the ingredient which can not be refined from waste plastic, such as: soil, wood, stone, brick etc. If the raw materials are paper mill’s waste, separate the pulp. If there is water in raw material, should ...


  • Waste plastic pyrolysis plant with high profits

    Pyrolysis Plant: Waste plastic pyrolysis plant, with the superiority of low capital investment and high fuel financial price, it has become the first preferred waste disposal method in many countries.This profitable project was established every week with low labor costs and high profits. Huayin renewable energy equipment company, established in 1993,have been a leader of oil pyrolysis ...


  • Plastics recycler increases capacity with WEIMA shredder case study

    Aqua Plastics, Inc., a plastic recycler located in Hickory, North Carolina, integrated a WEIMA WL(K) 15 into their recycling line in 2006. Since then, they have experienced the benefits of a high-quality shredder that can process a wide variety of plastic scrap in large volumes. A WEIMA WL(K) 15 shredder was installed at the front of the recycling line from the beginning. It wasn’t until ...


    By WEIMA

  • New PET recycling plant at PFR Nord

    The Mensing Unternehmensgruppe in Hohenwestedt (Germany) invests almost 10 million Euros in the construction of a new PET recycling plant. The construction of the recycling plant is associated with the new foundation of the PFR Nord GmbH in Hohenweststedt, where almost 30 new workplaces have been created. Altogether, the Mensing Group, which also includes the AFA Nord GmbH and the TM Recycling ...

  • The search for sustainable plastics

    As petroleum-based polymers foul our oceans and litter our lives, researchers seek more environmentally friendly ways to meet demand for durable, versatile materials. The fate of the world’s oceans may rest inside a stainless steel tank not quite the size of a small beer keg. Inside, genetically modified bacteria turn corn syrup into a churning mass of polymers that can be ...


    By Ensia

  • Plastics Separation in Compost

    Untitled Document Operators say their number one contamination problem is plastic - small, large and in-between - in the compost ...


    By BioCycle Magazine

  • The Ubiquitous Plastic Bag — And What To Do

    Each year, Americans consume over 100 billion single use plastic bags, the most ubiquitous of all throwaway items. Their usefulness can be measured in minutes; unfortunately, the waste lingers longer, and can clog sewer lines, create problems in recycling plants, and pollute waterways. However, single use plastic bags are also cost-effective and more durable in inclement weather. Local, state, ...


    By BioCycle Magazine

  • Operator Strategies : Sorting Out the Plastic

    BETTER BUGS Ideas and products in the Better Bugs category attempt to affect the biological components and biochemistry of processes by altering the mix of microorganisms or enzymes present. After all, biology is the foundation of many, if not most, organics recycling systems. Pyrophiles: The first example of Better Bugs involves pyrophilic organisms, bugs that can take the heat. This example is ...


    By BioCycle Magazine

  • Compostable Plastics And Environmental Marketing Claims

    According to a bottled water survey conducted by Perception Research Services International (PRS) for Brand Packaging published in August 2011, where shoppers were interviewed in person to gain some insights on marketing claims, environmental and recycling messages were misunderstood and not even noticed by a majority of consumers interviewed. In fact, only 50 out of 200 shoppers even noticed the ...


    By BioCycle Magazine

  • Report: Recycling of flame-retarded plastics from waste electric and electronic equipment (WEEE)

    Shredder residues produced in plants processing waste electric and electronic equipment are excluded from material recycling due to a variety of polymeric materials and the presence of brominated flame retardants (BFR), which might contain banned polybrominated diphenyl ethers or toxic polybrominated dioxins and furans (PBDD/F). Herein we present a technological approach to transfer a significant ...


    By SAGE Publications

  • Turnkey Manufacturer & Supplier of Large scale Waste Plastic & Tire Pyrolysis Plant Machinery

    We establish large scale pyrolysis plants on turnkey basis. The total turnkey supply includes of machinery designing & simulation, equipment manufacturing, supply, installation, commissioning, technology transfer and operational training. We are one of the prominent leaders in establishing pyrolysis plants on turnkey basis.   Advantages of pyrolysis plants manufactured & ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you