Plastic Shredder Articles on Environmental XPRT

Shredding Puzzle in the Process of Waste Material Recycling

There are two main types of waste fabric waste: (1) the factory in the leather fabric processing and production of leather fabric can not be 100% of the use, so in the production of some by-products or waste, such as tailoring and sewing clothes when the extra cloth, cloth and other waste , As well as in the synthesis of chemical fiber in the process of excess waste and so ...

May 27, 2017

By Harden Industries Ltd.

Plastics Recycler Increases Capacity with WEIMA Shredder

Aqua Plastics, Inc., a plastic recycler located in Hickory, North Carolina, integrated a WEIMA WL(K) 15 into their recycling line in 2006. Since then, they have experienced the benefits of a high-quality shredder that can process a wide variety of plastic scrap in large volumes. A WEIMA WL(K) 15 shredder was installed at the front of the recycling line from the beginning. It wasn’t until ...

Aug. 21, 2013

Recycling Options for Mixed Plastics in Automotive Shredder Residues

Waste production (ASR) from shredding of automobiles is a major global problem. The current method of disposal via landfilling is unacceptable due to environmental concerns and high cost. This project focuses on the evaluation of competing technologies for recycling automotive shredder residues and in helping solve this industrial problem by analyzing feasible solutions for implementation. The ...

Jan. 1, 2000

Shredder Types - Single shaft shredder

Shredder can be equipped with different types of cutting systems: single-shaft, two-shaft, three-shaft and four-shaft cutting systems. These shredders are all slow-speed systems, in contrast to hammer mills which are generally high-speed systems. ...

Dec. 1, 2012

By Harden Industries Ltd.

Shredder Types - Two shaft shredder

Shredder can be equipped with different types of cutting systems: single-shaft, two-shaft, three-shaft and four-shaft cutting systems. These shredders are all slow-speed systems, in contrast to hammer mills which ...

Jan. 17, 2013

By Harden Industries Ltd.

Plastics recycler increases capacity with WEIMA shredder case study

Aqua Plastics, Inc., a plastic recycler located in Hickory, North Carolina, integrated a WEIMA WL(K) 15 into their recycling line in 2006. Since then, they have experienced the benefits of a high-quality shredder that can process a wide variety of plastic scrap in large volumes. A WEIMA WL(K) 15 shredder was installed at the front of the recycling line from the beginning. It wasn’t until ...

Sep. 22, 2014

By WEIMA

Dual Shaft Shredder

¡Dual shaft shredder for plastics/rubber scrap or other solid waste recycling. Harden double shaft shredder are being used for the recycling of plastic film, woven sacks, plastic drums, used computer and office machines, as well as wooden pallets. Harden Industries also supplies custom made ...

Mar. 15, 2013

By Harden Industries Ltd.

The WEIMA E-Rotor shredder

WEIMA America has introduced the new “E-Rotor” WLK shredder. The purpose of the new rotor is specifically for the recycling of film and fibrous materials. This includes the historically tough to shred woven and non-woven fibers. The design has also eliminated wrapping issues with thin gauge films & fibers which sometimes occurs with other rotor designs. One of the ...

Jun. 10, 2009

Plastic Recycling Facts

Plastic recycling is the process of recovering scrap or waste plastics and reprocessing the material into useful productsAccording to the Beverage Marketing Corp, the average American consumed 1.6 gallons of bottled water in 1976. In 2006, that number jumped to 28.3 gallons. Below list some ...

Jan. 23, 2013

By Harden Industries Ltd.

Plastic Recycling Process

Plastic recycling is the process of recovering scrap or waste plastics and reprocessing the material into useful products, sometimes completely different in form from their ...

Jan. 23, 2013

By Harden Industries Ltd.

Plastics Separation in Compost

Untitled Document Operators say their number one contamination problem is plastic - small, large and in-between - in the compost ...

Sep. 1, 2005

By BioCycle Magazine

Plastics Separation In Compost

Operators say their number one contamination problem is plastic small, large and in-between - in the compost feedstock and thus in the end product. New study and equipment offer some excellent solutions. An air separation unit from Hawker Corp. is attached to the outfeed conveyor of a screen. Plastic is collected in a tube sock (inset) attached to the fan assembly. PRESSURE in Europe to increase ...

Oct. 1, 2005

By Airlift Separator / Hawker Corporation

Separation of Nylon 66 (PA 66) From Automotive Shredder Residue (ASR) Plastics by Flotation

Plastics are the most valuable component of the automotive shredder residue (ASR) waste material making up 30% of the total weight. One promising separation technique, which is able to selectively recover the plastics from ASR, is flotation. It has been demonstrated for a synthetic PA66/ABS/PC system that nylon 66 (PA 66) can be selectively separated by caustic treatment and addition of alcohol ...

Jan. 1, 2000

Recycling of Pre-consumer Plastic Film

Untitled Document ...

Oct. 6, 2005

By Shred-Tech Corp.

UNTHA launches new Heavy-Duty Shredder

UNTHA shredding technology expands its product portfolio and rolls out the new VR series, a heavy-duty shredder, specifically developed for tough requirements in the wood recycling, plastics and paper recycling industry. With this new series, the renowned reliability of UNTHA products takes on a new dimension and ensures trouble-free ...

Jul. 14, 2010

By UNTHA Shredding Technology

Plastic Recycling in beautiful South Carolina case study

Palmetto Synthetics currently manages multiple production lines at their Kingstree, South Carolina facility. With their in-house equipment, Palmetto Synthetics has the capability to produce specialty fibers from 1.5 to 2000 denier with greater efficiency and consistency. Having such specialized equipment enables Palmetto Synthetics the opportunity to custom design the right fiber type, right ...

Sep. 22, 2014

By WEIMA

Tana’s shredder treatment doubled the value of recycled material

The purpose of Tana’s customer’s business is to minimize the amount of waste deposited in landfills, help keeping the environment clean and save non-renewable natural resources. The customer was looking for a shredder that could shred most of the waste fractions they received: industrial and commercial waste, construction and demolition wood, pieces of furniture and different kinds of ...

Sep. 15, 2010

By Tana Oy

Shredder for solid and thick-walled profiles and pipes

NEUE HERBOLD Maschinen- und Anlagenbau GmbH, Sinsheim, (www.neue-herbold.com), extends their machinery range by a new 4-shaft shredder with force feeding system. The 4-shaft shredder type HZR 1300/4 is able to size-reduce solid chunks and start-up lumps, as well as thick-walled profiles and pipes up to a diameter of 1200 mm x 1200 mm and up to a length of 6000 mm. The size ...

Jan. 8, 2013

By NEUE HERBOLD Maschinen-und Anlagenbau GmbH

Holcim: SRF production with UNTHA shredders in Vietnam

Work is underway to commission a Solid Recovered Fuel (SRF) manufacturing plant in Vietnam, for one of the world’s leading cement and aggregates specialists, Holcim. The plant will process solid footwear production waste from the country’s main shoe factory, to create a fossil fuel substitute that will power Holcim’s local cement kiln calciner. Following a global ...

Aug. 6, 2015

By UNTHA Shredding Technology

Getting to know the UNTHA VR series shredder

After 40 years in the industry, many organisations would find it difficult to maintain an innovative edge. Yet renowned for pioneering developments within the shredding technology marketplace, UNTHA has managed to continuously design and manufacture new and exciting machinery throughout the decades. The key driving force behind the invention of all UNTHA shredders is, ‘what do clients ...

Jan. 16, 2012

By UNTHA UK LTD

Subscribe to our eBulletins

Add Supplier Profile