plastic-to-hydrocarbon oil Articles

  • Case study - Veolia MPPE Technology - TOTAL F 15A Offshore - NL

    Offshore Gas Produced Water treatment-Unmanned Operation Operational since 2002 Robust against salt, surfactants, Corrosion inhibitors Fulfilling TOTAL’s environmental goal beyond present legal requirements Challenge Unmanned operation Remote control Practically no space on existing ...

  • Phytoremediation of Alkylated Polycyclic Aromatic Hydrocarbons in a Crude Oil-Contaminated Soil

    Abstract  Phytoremediation uses plants and their associated microorganisms in conjunction with agronomic techniques to remove or degrade environmental contaminants. The objective of the field study was to evaluate the effect of vegetation establishment plus fertilizer addition on the biodegradation of alkylated polycyclic aromatic hydrocarbons in a crude oil-contaminated soil. Four ...


  • The Three Basic Parameters for How to Address Oil / Hydrocarbon Based Material Spills

    The most basic quesAon to ask in regards to oil spills is, why do you clean them up? Very few people get the reason why you clean up an oil spill. The reason you clean up an oil spill is to reduce the toxicity of the oil to the environment so that living organisms can survive/ live. If single celled organisms can live in the environment, then generally ...

  • Remediation of hydrocarbon contaminants from oil lagoons and refinery waste - case study

    In 2007 econ delivered an indirectly heated thermal desorption plant to a client in Kuwait. The plant is de-signed to treat various types of waste with hydrocarbon contaminant content. In particular refinery waste, oil lagoons and down hole drilling waste. The aim is to recover the waste hydrocarbons from the soil/sand and remediate the lagoons of their contaminants.  Due to the natural ...


    By econ industries GmbH

  • The removal of toxic dissolved and dispersed hydrocarbons from oil and gas produced water

    Abstract Legislation worldwide and current technologies used in the treatment of offshore oil & gas/condensate produced water are mainly aimed at the removal of dispersed hydrocarbons (dispersed oil). Beginning of this century, new insights in the Norwegian part of the North Sea area were obtained on the toxic content of produced water and its impact on the environment. This was recently ...

  • Sun Oil Vapor Recovery System - Hydrocarbon Vapor Suppression

    Products & Equipment Used: Pneumatic Foam Unit NTC 8 AC-645 Long Duration Foam Application Summary: Mid Atlantic Constructors installed a vapor recovery system at the Sun Oil Marcus Hook (PA) Refinery. This involved connecting vapor return pipes to the existing pipe structure at a dock used to load and unload ships and barges. The pipes ...


    By Rusmar Inc.

  • Utilisation of shale oil by the extraction and retorting of oil shale

    Extraction of the bitumen fraction of oil shale was carried out using two different solvents, chloroform and toluene. Oil shale of 4.0 mm particle size from the El-Lajjun area in Jordan was used in this study. The solvents were recovered by distillation. The spent shale was retorted using a special retort and shale oil (Kerogen) was recovered. The quantity of the hydrocarbon was compared with ...


    By Inderscience Publishers

  • Regeneration of used oil

    Used oil regeneration technologies Over time, oil accumulates oxidation products, contaminants and impurities which drastically reduce its quality. Contaminated oil can no longer meet quality requirements and must be changed. Waste oil is collected and regenerated to retain valuable basic materials. Oil cannot be recycled at petroleum processing plants with ...


    By PC GlobeCore

  • Petroleum Hydrocarbons in Wastewater

    A wastewater treatment company established and operates an oil/water separation facility on a multi-acre industrial site in Northern California. Its purpose is to recycle oil products for profit while at the same time provide a wastewater treatment service for industries based in Northern California. The oily water mixes processed by the company are obtained from tanker bilges, contaminated ...

  • Proof That Bacteria Degrade Oil

    There has been a lot of publicity and ‘noise’ around the ability of bacteria to degrade oil, especially following BP’s Gulf of Mexico incident.  However little has been shown to prove that biological remediation is an effective means of treating oil contamination. Over many years CBIO have worked to develop a range of a microbial products that have proven to be able to ...


    By Cleveland Biotech Ltd.

  • Oil/Water Separation Technology

    Oil skimmers are simple, dependable and effective tools for removing oil, grease and other hydrocarbons from water. They usually pay for themselves within a few months. In order to ensure the oil skimmer you choose is right for your ...


    By Abanaki Corporation

  • Oil field, Southeast, USA

    PETROX AEROBIC BIOREMEDIATIONDEGRADATION OF OIL-FIELD WASTE Petrox is a specialty bioremediation product comprised of patented strains of live vegetative aerobic microorganisms providing fast, effective degradation of petroleum hydrocarbons. The oil-field pit treatment demonstrates the effectiveness of PETROX to treat oil production wastes encountered during the closure of multiple ...


    By CL Solutions, LLC

  • Oil & Grease applications notes

    EPA Method 1664A & 1664Bwas developed to determine the precise amount of n-Hexane Extractable Material (HEM) and Silica Gel Treated n-Hexane Extractable Material (SGT-HEM) that exist within a water sample. The HEM or SGT-HEM that is extracted contains a mix of various hydrocarbons usually residing within the semi-volatile range with a boiling point greater ...


    By Horizon Technology, Inc.

  • Oil in frac water testing

    The amount of water used in and produced by hydraulic fracturing of shale gas wells is in the millions of gallons per well. Whether the water is going to be taken off site for disposal or reused for re-injection, the flowback or produced water needs pretreatment to remove any residual oil from the wa-ter. Waiting for remote laboratory results can take several days to a week. The InfraCal TOG/TPH ...


    By Spectro Scientific

  • Monitoring Hydrocarbons in Bilge Water

    The Situation Various processes onboard ships, such as machinery wash-down, maintenance, and leakage generate oily wastewater. This contaminated water flow collects in the bilge of the ship. Marine diesel, lubricating oils, grease, as well as garbage may be present in bilge water. The bilge water is discharged overboard, with oil and grease concentrations in the discharged water limited ...

  • Pyrolysis Oil Specifications

    Pyrolysis oil is the end product of waste plastic and tyre pyrolysis. Pyrolysis oil is widely used as industrial fuel to substitute furnace oil or industrial diesel. Typical industrial applications of pyrolysis oil as a fuel: Boilers Furnaces ...

  • Bioremediation of an Oil Spill

    Bioremediation is the method of choice to effectively clean up a small spill of hydrocarbons. In this case, five-hundred liters of BTEX has spilled from an above ground storage tank into a pasture that is located at the west edge of the Royal Roads University (RRU) grounds. The soil is classified as a Gleyed Eutric Brunisol based on recent laboratory analysis; it contains clay, but is fairly ...


  • Oil Water Separator Maintenance

    Oil water separators (OWS) can be co$tly to maintain, $20,000 or more on average per cleaning and if not properly managed, can be very expensive conduits of pollution. Have you taken steps to minimize the effects and consequences on your operating co$t? When was your facility’s last OWS maintenance ...

  • Fuel oil removal

    Project Profile:Aquifer Solutions Groundwater Remediation DATA: End User: Aquifer Solutions, for Republic Paper Location: Board Commissioned: Commerce City, CO, Fall, 2003 Units: (1) FDB-19P Complete with dedicated Flow Rate: backwash ...


    By Filtra Systems

  • Peak Oil – Peak Opportunity?

    Possibility and public policies can harness renewable energy technologies for a bright future “Alternative” fuels are nothing new. In fact, they were the mainstream power source a century ago. Rudolph Diesel built his engine to run on peanut oil. Henry Ford designed the Model T to run on ethanol. Wind delivered a significant source of power in the last century. Cheap gasoline (and ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you