plastic-to-hydrocarbon oil conversion system Articles

  • LED Applications for Oil and Gas Refining and Processing

    Oil and gas processing facilities are unsafe due to the existence of hazardous compounds during operations. When addressing such issues, companies in the sector may deploy explosion proof lighting systems to prevent the ignition of sparks created from the electrical equipment. The adoption of LED technology in oil and gas refineries has helped reinforce key safety measures associated with ...


    By Larson Electronics LLC

  • In Situ electromagnetic heating for hydrocarbon recovery and environmental remediation

    Introduction Thermal recovery methods, as applied in heavy oil and oil sand deposits, and in environmental remediation, have the common objective of accelerating the hydrocarbon recovery process. Raising the temperature of the host formation reduces the oil and bitumen viscosity, and, in environmental remediation, increases vapour pressure. These effects assist in sweeping the substances ...


    By McMillan-McGee Corp.

  • Past the Peak - what the peak oil theory means to the economy

    Except for scores of cars abandoned on the shoulder, the eight-lane highway was nearly empty one Friday morning last September. Gas stations along the feeder roads were closed, with trash overflowing the bins and blowing across the pavement. Shopping center parking lots were empty; entry doors were blockaded. It was the day before the much-anticipated arrival of Hurricane Rita and the entire ...

  • Use of process analytics for cracking processes in refineries – Case Study

    Crude oil processing Crude oil is a complex mixture of hydrocarbon compounds and relatively small quantities of other materials such as oxygen, nitrogen, sulphur, salt and water as well as inorganics and metals. It occurs naturally in the ground and was formed millions of years ago. Crude oil varies from source to source in composition and colour. It is typically mixed with gases, which have to ...

  • Monitoring vibrations, mechanical seals, and bearings for safety and performance

    With more than 70 years of experience in plastics processing, Switzerland-based Quadrant Group is a leading expert in a wide range of polymer materials and technologies for polymer conversion. In order to maintain a high level of quality in the production process, Quadrant's heat-transfer pumps must work safely and reliably. These pumps are commonly subjected to high loads. At the same time, ...


    By ALLWEILER GmbH

  • Process analytics in gas-to-liquid (GTL) plants – Case Study

    NG, FT and GTL Natural Gas (NG) is a vital component of the world's supply of energy. It is one of the cleanest, safest, and most useful of all energy sources. NG is colorless, shapeless, and odorless in its pure form. It is combustible, and when burned it emits lower levels of potentially harmful byproducts into the air than other fuels. NG is a mixture of hydrocarbon gases. While it ...

  • CHP efficiency for biogas

    Combined heat and power plant efficiency is a function of the conversion efficiency of the energy in the fuel gas to useful energy in the form of electricity and heat. A combined heat and power (CHP) plant is typically a reciprocating gas engine that uses the energy in the gas to drive a crank shaft. The crank shaft turns an alternator to ...


    By Clarke Energy

  • Industry News

    Compostable Cling Film Novamont unveiled a new biodegradable and compostable cling film that can be used for any kind of foodstuff, including perishables that have a high fat content such as oils, sauces and butters, and for acidic foods. After use, the material is compostable in accordance with European standards. Novamont’s cling film, developed with partners, has the same physical ...


    By BioCycle Magazine

  • Using Venturi Scrubber Technology for Syngas Cleaning

    As part of our nation's program to reduce dependence on fossil fuels, various gasification technologies are being applied. These processes take renewable organic material and, through the application of heat and pressure, convert the materials into syngas for further use. Arguably, in nearly all of these processes, the most critical design aspect is the reliable and efficient removal of ...


    By Bionomic Industries Inc.

  • Compliance Issues Facing Midstream Production - Case Study

    It’s in the news every day; the natural gas production industry is experiencing record growth. The gas reserves in the United States are thought to hold enough natural gas for hundreds of years and the gas and oil industry has improved extraction techniques that make gas production more affordable and less impactful on the landscape. This is good news for the country and our environment. ...

  • Thermal oxidizers for natural gas savings - Case Study

    It’s in the news every day; the natural gas production industry is experiencing record growth. The gas reserves in the United States are thought to hold enough natural gas for hundreds of years and the gas and oil industry has improved extraction techniques that make gas production more affordable and less impactful on the landscape. Good news for the country and our environment. The ...

  • A solution to fracturing water supply and disposal issues

    “Water, water, everywhere, Nor any drop to drink.” –The Rime of the Ancient Mariner, Samuel Taylor Coleridge Many topics of conversation among oil and gas industry professionals are predictable – oil price trends, the “great shift change” imperiling the available workforce, and production quotas and caps from OPEC. Yet one pressing topic among those developing ...


    By Fairmount Santrol

  • Data Requirements for Soil, Sediment, and Sludge

    Site soil conditions frequently limit the selection of a treatment process. Process-limiting characteristics such as pH or moisture content may sometimes be adjusted. In other cases, a treatment technology may be eliminated based upon the soil classification (e.g., particle-size distribution) or other soil characteristics. Soils are inherently variable in their physical and chemical ...

  • Recapping the Debate Over Whether Low-Carbon Economies Are Good for Tech

    To be of any use, tech products need power from electrical outlets, stored chemical energy such as batteries and generators, solar collectors, kinetic energy like my emergency hand-crank radio/charger, or other means. As more global and local regions move away from fossil-fuel-based power to low-carbon renewable power, I wonder how my colleagues in the tech industry would weigh in on a debate ...


    By Antea Group - USA

  • Latest analytical technology ensures biogas efficiency

    Anaerobic Digestion (AD) relies on the ability of specific micro-organisms to convert organic material into a gas that can be used to generate electricity. However, these bacteria require specific conditions if they are to function effectively and instrumentation specialist company HACH LANGE has developed a range of online, portable and laboratory instruments that have enabled a large number of ...


  • Is it time to rethink recycling?

    If our current approach to recycling isn’t the best for the economy or the environment, why do we do it? Criticize recycling and you may as well be using a fume-spewing chainsaw to chop down ancient redwoods, as far as most environmentalists are concerned. But recent research into the environmental costs and benefits and some tough-to-ignore market realities have even the most ...


    By Ensia

  • SGBI opinion article: shale gas

    Government perceives electric vehicles to be a panacea that will solve problems surrounding air quality and CO2 emissions simultaneously. The EV has two main selling points: reduced CO2 emissions and high efficiency. However, these are only valid at a superficial level and the argument disintegrates under any level of scrutiny. In terms of CO2 emissions, EVs replace ‘average’ cars to ...


    By CNG Services Limited

  • Recycling; Segregation of Waste; Use of Recycled Products; Energy Conservation: Flinders Medical Centre

     Background Flinders Medical Centre (FMC) initiated the Healthy Environment Project in December 1991 with the aim of minimising waste and exploring other environmental initiatives. FMC is a public teaching hospital in the southern suburbs of Adelaide, with 500 beds and 3,000 staff. Over the past two decades, hospitals have increasingly sought to minimise the risk of ...


  • Implementation of the Waste Minimisation Hierarchy - Reduce, Reuse, Recycle: Television Victoria Pty Ltd

     The three R’s - reduce, reuse and recycle - was the battlecry used by the Ballarat-based Television Victoria in its fight against waste. Through simple but effective waste minimisation measures, the company achieved its goal of reducing waste production by 50% within only four months, two months ahead of time. The company has shown that while recycling is the most commonly used method of ...


  • Small Capacity Sulfur Recovery Units

    Documento sin título ...


    By Merichem Company

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you