plastic water pipe system Articles

  • Fast, Effective Method Removes 99% of BPA From Water Within 30 minutes

    Carnegie Mellon University chemist foresees lowering BPA exposure around the world ...


    By Fluence Corporation

  • Water Recovery from an Aluminum Can Manufacturing Process Using Spiral-Wound Membrane Elements

    Abstract A waste treatment unit has been designed to recover water and various components from an aluminum can manufacturing process. Due to the scarcity of water in the Middle East and its inherent cost, water recovery is both necessary and cost effective. The manufacturing process generates: 1) an 11,356 L/hr (50 gpm) aqueous stream contaminated with hydrofluoric acid, dissolved aluminum, and ...

  • Rotomite-6000-CD Dredge System - US Copper Mine-case study

    SRS Crisafulli's Integrated Product Solutions - To remove water, soft and abrasive material, sludges, and slurries from Industrial, Municipal, Agricultural, and Government Lagoons, Ponds, Lakes, Canals, and flooded and flood threatened areas. And to irrigate farms and ranches. Dredge Rentals. Many customers rent Crisafulli’s Rotomite and FLUMP dredges on ...


    By SRS Crisafulli, Inc.

  • Composite protection for slopes - Dallas Eastside Water Treatment Plant, Texas - Case study

    Geocells, geotextiles and geomembranes resolve the chronic erosion problems of a municipal levee. In 1996, consulting engineers under con-tract to the City of Dallas contacted Soil Stabilization Products Company Inc. (SSPCo) to discuss solutions for chronic problems caused by more than a dozen sliding failures per year on the outer slopes of a water treatment facility's lagoon. The facility, ...


    By Presto Geosystems

  • Cart-Based Organics Collection. Citizens Drive 65 Percent Diversion System

    For better or worse, citizens opposing waste management projects usually end up being labeled as NIMBYs — not in my backyard. This could have been the case in Halifax, Nova Scotia but instead, the citizens took their opposition one step further, basically taking the design for an acceptable waste management system into their own hands. In the process, they laid out the foundation for an ...


    By BioCycle Magazine

  • Pumping Stations - Klargester`s range of package systems are efficient, economical to install and are available on short lead-times to fit in with tight construction schedules

    There are a variety of solutions on the market for properties in the UK that are unable to connect to the main sewer by gravity. However, UK building regulations dictate that pumping stations must be used whenever possible. As a result, pumping stations are the most commonly specified solutions for off-mains developments, ahead of sewage treatment plants, such as the Biodisc, and septic tanks. ...


    By Kingspan Water & Energy

  • BCP 2430 - Detergent Manufacturing Facility - Injection Mold Cooling System - Bio-organic & Corrosion Deposit Control - Case Study

    Problem – Plastic Bottle Mold Defects A bottle manufacturing plant in Utah was experiencing high reject rates due to poor injection mold cooling. This resulted in high plastic recycle costs and the need to extend mold change times for extensive cleaning of the molds’ cooling channels. Cause of Problem - Biofouling Poorly controlled microbial ...


    By AMSA, Inc.

  • Scale removal - Case Study

    Water Cooling Towers Operate at Better Efficiency and Lower Maintenance Costs with KDF Water Filter Media "As Seen in Water Quality Products" At TowerKlean™ LLC... KDF Water Filter Media Help with Scale, Algae, Chlorine and Heavy Metal Removal from Water Scale... it's a vicious never-ending problem that can kill the overall efficiency of water-cooling systems or ...


    By KDF Fluid Treatment, Inc.

  • A new approach for fixing leakages in Qatalum, QAT case study

    Qatalum is the largest aluminium smelter plant ever launched in one phase and is a joint venture between Qatar Petroleum and Norsk Hydro. Its annual capacity is 585,000 metric tons of primary aluminium. Qatalum also ensures a stable supply of electricity by a 1350 MW natural gas power plant but this requires an effectively function of the cooling water system. Project description ...


    By AMEX GmbH

  • Street Elbow Introduction

      A street elbow is a type of plumbing or plumbing connection intended to join a piece of pipe and another corner fitting. The difference between a street bend and a regular bend is the nature of the connections at each end.   A regular elbow has a female connector or FIP connection at both ends. A hub ...


    By Adamant Valves

  • Ground drainage with Filtram

    The A11 Thetford Bypass comprises approximately 7.5km of single and double carriageway. The design called for a roadside fin drain system to act as a vertical water flow interceptor in conjunction with a horizontal under channel drainage layer incorporated within the roadbase. The combined system discharges to conventional drainage outlets. Filtram 1B1 -ED was chosen as the vertical fin drain and ...

  • 1st Tech applications range case study

    Paper industry: roller, air compressor, after cooler, calender bowl, chemical scrubber, closed cooling system, condenser, cooling tower, gas cooler, heat exchanger, intercooler, filtrate tank, filtrate pipe, vacuum filter, vacuum pump, slush pump, lime pump, evaporimeter, digester, scrubber, flow box, squeezer, indirect cooler, absorption plant, gas steam room, steam ...


    By Mibo International Corp.

  • Orange county goes green

    As individuals, many Orange County residents help fulfill the mandate to be environmentally conscious by recycling plastic bottles and aluminum cans, employing strategies to reduce domestic water consumption and making personal transportation more fuel-efficient. In the Orange County governmental structure, similar and often little known practices are being followed by departments and agencies ...


    By Waste Advantage Magazine

  • How to Increase Your Industrial Cooling Tower Efficiency

    Although cooling towers are generally some of the most cost-effective cooling mechanisms as compared to other cooling technologies (such as many dry air cooling systems), it is still important to monitor your industrial cooling tower efficiency and run it as seamlessly as possible. This will ensure your facility can: Save energy Reduce the amount of ...


    By SAMCO Technologies, Inc.

  • Quebec recovers heat energy from sewage in Baied`Urfe

    Energy recovery from municipal sewage and greywater offers cities a new reliable resource.  Erwin Schwartz of DDI Heat Exchangers Inc. reports on a novel application of rectangular, wide-gap heat exchangers that has worldwide potential. The Canadian company DDI Heat Exchangers Inc. installed, with the support of the Quebec provincial government and municipal sewage authority, the first ...


    By DDI Heat Exchangers Inc.

  • Bioremediation of diesel oil - derwent island, national trust, united kingdom

    Introduction A spillage of red diesel oil (heating oil) from a holding tank located on Derwent Island in Lake Derwentwater, Cumbria, has been successfully treated using Microbac"s oil degrading bacterial cultures. The spill occurred in the Lake District National Park and a major concern was contamination of the lake water. The main problem associated with the work was access to the island ...


    By Microbac Ltd

  • The future of leak detection starts today

    For many water engineers the day in the office begins with a look at the screen. They can analyse the results of the nightly measurements of their fresh water pipelines in a few minutes and make important decisions for the day. Are there any new leaks in the system? Using the information found, the water engineer can send his workers to precisely those points that the leak detection system has ...


    By Gutermann AG

  • What makes high-risk pipelines deteriorate to a state of failure?

    According to AWWA's 2016 Benchmarking Survey, the average water and wastewater utility has seven breaks per 100 miles of piping every year. Tip-top systems experience just four breaks in that distance, while those at the bottom have 18. While it’s interesting to note the difference in break rates, it’s unfair ...

  • Evaporator concentrates brine pond for about 1 cent per gallon

    The Facility Eagle-Picher Industries has an 8-acre hazardous waste surface impoundment pond at its Electro-Optics Division plant in Quapaw, Oklahoma. The Problem By the time Eagle-Picher contacted Aqua-Chem ICD, the impoundment pond had been in use for more than 20 years and contained more than 5 million gallons. Environmental regulation required the plant ...

  • First Stainless Steel High-Flow Filter Housing Hits the Market

    Stainless Steel Housings the Key to Improved Filtration Performance As manufacturers look to increase the performance of their filtration systems and avoid the costs of replacing equipment, stainless steel housings are definitely a versatile problem solver. In the manufacturing world, filtration systems are truly put to the test. They must withstand high temperatures and ...


    By Shelco Filters

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you