plastics-to-crude technology Articles

  • Plastics, Marpol and Circular Economy: Prevention of Marine Plastic Pollution

    Large ships, offshore platforms and poor land waste management, cause much of the marine pollution. Proper action is needed to solve this problem, starting with the correct use of technologies such as industrial shredders ...


    By SatrindTech Srl

  • plastic pipe fitting mold technology

    “ Forever care you, care your molds”, is our insist mentality philosophy. We insist on mold construction design and steel quality, believe these two factors are main points to achieve mold with excellent performance. produces moulds for PVC ...


    By Focare Mould Co.,Ltd.

  • Waste plastic recycling plant with high technology

    Company Profile: Waste plastic pyrolysis plant, with the superiority of low capital investment and high fuel financial price, it has become the first preferred waste disposal method in many countries.This profitable project was established every week with low labor costs and high profits. Huayin renewable energy equipment company, established in 1993,have been a leader of oil pyrolysis ...


  • Case study - Nigeria crude oil in soil site

    Safic Technologies, Ltd. - Port Harcourt A pilot study was conducted testing soil samples collected from a pipeline spill. Split samples were sent to Sitelab for EDRO analysis and results were the same. Samples were also sent to a Nigerian lab and a highly reputable lab in the United States for confirmation. After testing the samples a second time, the American lab got better results. ...


    By Sitelab Corporation

  • Measuring level of crude oil case study

    MonoScan provides an economical ultrasonic solution for measuring level of crude oil in one of Kaliningrad's well known oil fields. The Eastern Gorino oil field located in Gorino, Kaliningrad near the border of Lithuania, contains 11 oil wells and is capable of producing 200 tons of crude oil per day. The Kaliningrad Geological Oil & Gas company, which owns the field, sought a solution for ...

  • Hydrocarbon Monitoring Technologies

    The oil spill in the Gulf of Mexico has increased the interest in technology in oil spills, cleanups and remediation. The Gulf of Mexico oil spill is expected to present challenges to every person in the region whose livelihood or operations depend on access to clean water and air.While the obvious presence of crude oil floating on the surface appears to have diminished, the concern that the bulk ...


    By PetroSense, Inc

  • PVC injection molding technology

    PVC injection molding process application: water supply pipe, home appliance pipe, house wall plate, industry machine housing body, electronic products packaging, medical equipments, food package. Injection molding process condition Material dry: usually it don’t need dry. ...


    By Focare Mould Co.,Ltd.

  • Recycle Pallet Molding technology

    *Recycle Pallets Molds Design Analysis.When we received the customer Pallets design, we will gather all the related technical people to analysis the mold design first like demolding draft angle, strength, melt filling, deformation, thickness…and make mold flow analysis. After the design initially confirmed, we will have a technical meeting again to discuss all the plastic pallets molds ...


    By Focare Mould Co.,Ltd.

  • Thermal Treatment Technologies

    Hot gas decontamination: Hot gas decontamination is a technology still in the pilot-scale of development that can be used for decontamination of explosives-contaminated masonry or metallic structures. The method involves sealing and insulating the structures, heating with hot gas stream to 260 °C (500 °F) for a prescribed period of time, volatilizing the explosive contaminants, and destroying ...

  • Dispersant and salinity effects on weathering and acute toxicity of South Louisiana crude oil

    Chemical dispersants are an important technology in the remediation of oil spills in the aquatic environment, facilitating degradation of crude oil and salinity is an important factor in dispersant effectiveness. The aim of the current study was to explore the role of salinity on the degradation chemistry of crude oil polycyclic aromatic hydrocarbons (PAH) and acute toxicity of the water ...


    By John Wiley & Sons, Ltd.

  • International Copper Recycling and Processing Technology

    As the sense of environmental protection becomes popular, the copper scrap recycling industry turns into a hot spot. As for how to recycle and process copper scrap, there are mainly four methods. The following parts of the text will introduce these means in details. 1.Cryogenic ...

  • Green transportation: need, technology and challenges

    Internal combustion (IC) engine based vehicles are the backbone of the modern transport sector. These vehicles use fossil fuels as a source of energy to propel it and emit toxic gases. These noxious gases harm the environment and causes human health problems. Hasty usage of fossil fuels results in rapid depletion of these resources and price inflation. These concerns encourage the modern society ...


    By Inderscience Publishers

  • Gas-assisted Injection Molding technology

    Through gas-assisted injection molding,products with uneven wall-thickness can be produced.The products produced by gas-assisted injection molding not only can avoid the surface shrink mark, warp and distortion and consume very small amount of materials,but also are easy to be controlled.thus the outer surface of the products are very smooth and no air bubble.It is a technology which use the ...


    By Focare Mould Co.,Ltd.

  • Bio-plastic (poly-hydroxy-alkanoate) production from municipal sewage sludge in the Netherlands: a technology push or a demand driven process?

    Valorisation of components from municipal ‘waste’ water and sewage sludge gets more and more attention in order to come to a circular economy by developing an efficient ‘waste’ to value concept. On behalf of the transition team ‘Grondstoffenfabriek’ (‘Resource factory’) a preliminary research was performed for all the Dutch water boards to assess the technical and economical feasibility of ...


    By IWA Publishing

  • Blazing the plastics recycling trail

    In the past year, MBA Polymers has opened two facilities showcasing its high-tech recycling process for plastics from end-of-life durable goods. Those plants, in China and Austria, are just the beginning for this plastics recycling pioneer; over the next two years, the company is hoping to announce at least one additional facility in Europe as well as the development of another operation in Asia. ...

  • Plastic Recycling Process

    Plastic recycling is the process of recovering scrap or waste plastics and reprocessing the material into useful products, sometimes completely different in form from their ...

  • Phoenix Technologies - Green Machine solutions case study

    Problem Phoenix Technologies of  Bowling Green, OH  is a leading PET plastic recycler who was spending approximately $120,000 annually on replacement air filters. The Solution Phoenix sent us filters for testing and were satisfied that the Green Machine will be a perfect solution to dramatically lowering replacement filter ...


    By Diversitech

  • Plastic recycling pyrolysis plant

    Plastic waste can be seen everywhere in our daily life and it brings about serious pollution problem. But on the other hand, it is also a kind of precious potential resource and it is meaningful to dispose waste plastics in an effective method. To grasp the great business opportunity, Doing group has successfully developed the new design ...

  • In the Works: Magnetic Plastics

    (from Recycling Today Magazine) Harnessing the power of magnetic currents has long been an effective way to separate and recover scrap metals. Now, researchers are looking at ways to use this same power to improve scrap plastic sorting methods. Scrap plastic comes in the form of production or processing scrap and from post-consumer streams. Production scrap can often be components or ...

  • Plastic Products – Designed for Recycling?

    When it comes to the UK’s approach to plastics recycling, local authorities, waste management firms and members of the public often come under fire. But to what extent would greater product design considerations enable further progress to be made, considers Chris Oldfield? A recent study conducted by recycling association Recoup¹, found that plastic is the material consumers are most ...


    By UNTHA UK LTD

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you