pm2.5 high volume Articles

  • The productive environmental laboratory: BSK Labs boosts efficiency with Metrohm IC

    BSK Labs runs a number of environmental laboratories and service centers along the west coast of the US. A total of 70 employees – including microbiologists, chemists, lab technicians, and support staff – make sure that the 200 to 350 samples that come in every week are analyzed. BSK Labs specializes in potable water chemistry, ground water monitoring, storm water runoff, solid waste ...


    By Metrohm AG

  • Two Detector Solution to Analyzing Sulfur

    Sulfur compounds are reactive, corrosive to pipes, and destructive to catalysts in petroleum refineries. Sulfur emission are strictly regulated globally. When released into the atmosphere sulfur dioxide converts to sulfuric acid resulting in adverse effects on human health and the environment. Sulfur detection is found useful in many other industries; therefore, detection of sulfur compounds in ...


    By Restek Corporation

  • Webinar Highlights: Microfluidics for macromolecules

    Hi, I’m Jim Murphy, Principal Consulting Chemist at Waters, and I recently collaborated with Lucinda (Cohen) Hittle to present an exciting webinar on the use of microflow chromatography for macromolecules.  Lucinda, a Director of Discovery Bioanalytics at Merck, presented an overview of the use of LC-MS for peptide analysis along with various case studies for in vitro and in vivo ...


    By Waters Corporation

  • Seven Ways Your Facility Isn’t Meeting Effluent Regulations and How to Solve Them

    Whether you own, operate, or help manage a municipal or industrial facility that deals with wastewater, it’s important to understand how wastewater treatment can play a significant role in the overall health of your business, especially when it comes to meeting effluent regulations. This is an important part of the wastewater treatment process to consider, as ignoring it could earn your ...


    By SAMCO Technologies, Inc.

  • Direct Mass Flow or Volumetric: The Thermal Flow Meter Technology Advantage!

    In today’s world where everyone is watching the bottom line, you need high performance, cost-effective instrumentation—and capillary thermal mass flow meters and controllers have been proven to meet this criteria in a wide range of process applications. Thermal mass flow technology is an industry standard for mass flow control of gases because it measures flow directly, at the ...


    By Sierra Instruments, Inc.

  • Pump up the volume

    On April 6 the Control of Noise at Work Regulations 2005 will come into effect for any licensed premises or venue offering amplified music entertainment. Tim Turney, Product Manager with Casella CEL which manufactures noise measuring and dose meter technology takes a quiet look at the noisiest industry in town.When the smoking ban came into effect last June many clubs and pubs held a ‘farewell to ...


    By Casella

  • From high-volume aluminium swarf to compact briquettes - Case Study

    Ruf briquetting machines help Trumpf increase output in laser component manufacturing. In order to ensure the highest possible output and productivity when machining aluminium, for the last two-and-a-half years Trumpf's laser components production unit has been operating as a fully-automated machining centre. It can operate unmanned for up to 60 hours, but to do this it needs both robots ...

  • Large volumes compressed into small volumes saves costs case study

    Vöhringer GmbH with its 120 staff and ultramodern machine park in Trochtelfingen each day processes up to 40,000 m2 of sheeting. This is mainly used for manufacturing specialist furniture parts up to complete furniture sets – especially for caravans and mobile homes but also for exhibition stand construction, for doors and the furniture industry. Chippings and dust accumulating during ...


    By WEIMA

  • Environmental Toxicity Studies Using Chickens as Surrogates for Wildlife: Effects of Vehicle Volume

    Domestic chicken embryos are frequently used for avian developmental toxicity studies of polyhalogenated aromatic hydrocarbons, which are often injected into eggs with oil-based vehicles. The volume of toxicant and vehicle injected ranges from relatively low volumes (0.1–0.5 l/g egg) to relatively high volumes (1.0 l/g egg and above). Previous research from our laboratory suggested that high ...


    By Springer

  • MVX-7100 Micro-Volume Injection System for ICP-MS

    Micro-Volume Injection System for ICP-MS. The MVX-7100 Workstation when paired with a DS-5 total consumption nebulizer creates a paradigm shift in ICP-MS sample introduction. It is a long overdue tool for trace element researchers wanting to measure elements at trace levels in microliter sized samples. In this study the MVX-7100 is used with quadrupole ICP-MS for injection of 20 micro L and 100 ...


    By Teledyne CETAC Technologies

  • A method for reducing purge volumes in deep monitoring wells: a purging experiment.

    Regulatory agencies often require three well casing volumes or more be purged prior to collection of groundwater samples for chemical analysis. Costs are high for testing and disposing of potentially hazardous purge water; therefore, efforts must be made to minimize waste-water volume while obtaining representative groundwater samples. Lockheed sponsored a purge experiment on two deep monitor ...


    By Hargis + Associates Inc

  • Large Volume Splitless Injection Using an Unmodified Split/Splitless Inlet and GC-TOFMS for Pesticides and Brominated Flame Retardants

    Abstract Large volume splitless injection for gas chromatography typically requires a special injection port, for example, a programmable temperature vaporizer (PTV), but an alternative setup using concurrent solvent recondensation–large volume splitless injection (CSR-LVSI) and a split/splitless injection port has been reported. This technique was used here, both with and without ...


    By Restek Corporation

  • High-throughput Microscale Bioanalysis is not a Paradox

    Question: When someone says microscale chromatography, what comes to mind? Increased sensitivity? Reduced sample volume? Enhanced MS sampling efficiency? Yes, yes, and yes! You might also say, “finicky,” “slow,” or “only one person in our group knows how to use it!” Maybe even, “there’s no way I can successfully transfer that method, so why ...


    By Waters Corporation

  • High density polyethylene (HDPE) pyrolysis plant

    Thermal degradation of plastic polymers is becoming an increasingly important method for the conversion of plastic materials into valuable chemicals and oil products. In this work, virgin high-density polyethylene (HDPE) was chosen as a material for pyrolysis. A simple pyrolysis reactor system has been used to pyrolyse virgin HDPE with an objective to optimize the liquid product yield at a ...

  • High pressure pumping systems - it`s all in the design

    High pressure pumping systems are used in a wide range of industrial processes. Careful selection of the components of the pumping system is essential for optimum safety and reliability. Failure to install a quality pump designed for the task could present a potential risk to human health or life or result in significant down-time and loss of production capacity with the associated costs to the ...


    By Cat Pumps

  • Why high temperature combustion of landfill gas?

    Due to the accumulation of knowledge and the tightening of environmental law, the landfill technology has increasingly become concerned with the management of trace compounds in landfill gas. With landfill gas, contamination is through sulphur, chlorine, fluorine, halogenated hydrocarbons and heavy metals. Other trace elements such as volatile organic compounds (VOC), impose environmental ...


    By Hofstetter BV

  • Minimizing aerobic and post anoxic volume requirements in tertiary integrated fixed-film activated sludge (IFAS) and moving bed biofilm reactor (MBBR) systems using the aquifas model

    Research was undertaken to calibrate and verify the Aquifas semi-empirical and biofilm 1D models against a full scale Integrated Fixed-Film Activated Sludge (IFAS) system. The model was then used to evaluate and identify alternatives to upgrade the performance of tertiary IFAS system and Moving (mobile) Bed Biofilm Reactor (MBBR) systems that could minimize volume required for nitrogen removal. ...

  • Cardiovascular metrics and transepidermal water loss in a high heat risk environment

    Heat stress is currently primarily classified by environmental factors and not physiological factors. It is already known that certain cardiovascular metrics such as heart rate, stroke volume, blood pressure and vascular compliance undergo changes as the body traverses the different classifications of heat stress from heat oedema to heat stroke. However, there is no specific metric that provides ...


    By Inderscience Publishers

  • High sensitivity CO2 monitor for CO2 geological sequestration efficiency monitoring

    Canadian prosperity is currently linked to revenue generated from processes that produce large volumes of greenhouse gasses as a by-product. Under evidence that the human fingerprint on our planet is in direct correlation to global climate change, the monitoring and control of greenhouse gas emissions has become a subject of recent focus among many sciences. Recently, legislation has been imposed ...


    By Boreal Laser Inc.

  • High rate anaerobic treatment of Sago wastewater using HUASB with PUF as carrier

    Abstract: Sago industry is one of the major small-scale sectors in India and over 800 units are located in the southern State of Tamilnadu. Processing of sago generates enormous quantities of high strength wastewater requiring systematic treatment prior to disposal. The present study is an attempt to treat the sago wastewater using Hybrid Upflow Anaerobic Sludge Blanket (HUASB) reactor, which ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you