pneumatic waste transport Articles

  • Waste handling systems for hygiene product manufacturers

    Valvan Baling systems is the preferred supplier for waste handling systems at several renowned hygiene product manufacturing companies. One of the largest producers of hygiene products, such as diapers and feminine care, has built a new state-of-the-art plant. All the trim waste from the production lines is handled through a waste handling system, built and installed by Valvan Baling ...


    By Valvan Baling Systems NV

  • In-Transit Sludge - Odor Control

    Products & Equipment Used: Pneumatic Foam Unit NT/5 (ELECTRIC) AC-904 (BLACK) Long Duration Foam AC-905 (RED) Long Duration Foam Application Summary: The Lynn (MA) Water and Sewer Commission's (LWSC) incinerator, dedicated for burning sewage sludge, was shut down because of emissions that exceeded regulatory limits. LWSC ...


    By Rusmar Inc.

  • Dosing and mixing of powdered activated carbon for flue gas applications

    Subject: Powdered activated carbon (PAC) is dosed in dry powder form into flue gas for the removal of dioxins, furanes, mercury and other heavy metals from flue gases. Gericke supplies complete solutions for the handling of bulk solids. These complete installations are characterized by their clean, accurate, trouble- and dustfree operation. Application: Furnaces, incinerators, sinter ...


    By Gericke

  • Inox in a landfill

    For collection and transport of leachate, landfill sites are using various types of pumps. Grindex electrical corrosion resistant pumps provide the volume needed where pneumatic pumps and other submersibles pumps fall short. One of the landfills in Illinois has 18 Grindex corrosion resistant pumps in operation and they now have plans to replace all remaining submersibles with Grindex INOX pumps. ...


    By Grindex Pumps

  • BT-Wolfgang binder erected new glass powder plant for Geocell for the production of foam glass ballast in upper Austria

    The planning, delivery and installation of the complete machine and electro engineering equipment for the glass powder plant from the company GEOCELL, one of the leading producers of foam glass ballast in Europe, was carried out by the company BT-Wolfgang Binder GmbH from Gleisdorf, as general contractor. Initial situation: Before construction of the plant, the glass powder was ...

  • Florida-based BlueLinx makes cash from wood scrap - Case Study

    Headquartered out of Atlanta, Georgia, BlueLinx Co. is a renowned manufacturer of wood components and building products in North America. The Lake City, Florida plant is just one of the company’s forty-eight distribution centers and is home to forty-two employees including technicians and sales representatives for the corporation. BlueLinx of Lake City noticed a significant amount of scrap ...


    By WEIMA

  • Case study - Bespoke Solutions

    PROJECT 5000kg/h animal remains incineration project in accordance with EU WID Makkah, Kingdom of Saudi Arabia PROJECT DESCRIPTION The purpose of the plant was to dispose of the animal waste associated with Hajj religious festi-val in Makkah Saudi Arabia. During the festival approximately 10,000 tonnes of waste is pro-duced in 4-5 days. Historically ...


    By Todaysure Matthews

  • Phosphate Fertilizer Plants Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Moving difficult-to-handle bulk materials with flexible screw conveyors

    Flexible screw conveyor systems can be engineered to transport bulk materials that tend to pack, cake, smear, break apart or fluidize, and can prevent the separation of blended products. Flexible screw conveyors (Fig. 1) are suitable for most bulk materials, from sub-micron powders to large pellets, both free-flowing and non-free flowing. They are capable of conveying bulk materials at any angle ...


    By Flexicon Corporation

  • From air conditioning to urban planning, defaults and standards create dysfunction by design

    How can we stop outdated assumptions from forcing us to waste? Personal heaters are a summer survival tool for many office workers chilled to the bone by hyperactive ventilation systems — an act of self-defense against an epidemic of overcooling that is wasting energy and confounding comfort in not only offices but also large shops, schools and other buildings. An audit ...


    By Ensia

  • Spending small to save big in a downturn

    How strategic upgrades in bulk handling components can pay off in the short term "You can"t save your way to solvency" goes the business adage, but suggesting major capital improvements with long-term pay-out in tight economic times may send your co-workers running for cover. Prosperity can often be found between both extremes, where strategically placed equipment upgrades can instantly reduce or ...


    By Flexicon Corporation

  • Renewable energy marketplace

    ALLU Group markets two types of equipment for use in biomass energy operations. The ALLU Screener Crusher bucket attaches to a front-end loader. The bucket is designed to aerate, crush, screen and mix at one time. The Screener Crusher has a rigid steel frame, onto which horizontally rotating screening and crushing drums are mounted. All the drums rotate in the same direction. There are several ...


    By BioCycle Magazine

  • Rear Loaded Garbage Body Parts

    Hydraulic garbage trucks are home waste collecting and transporting vehicles which are loaded either by hand or by container. In garbage trucks produced by HİDRO-MAK, body, discharge plate, hopper, compaction plate and hydraulic-pneumatic-electric diagrams are produced as a whole. ...


    By HidroMak

  • Operator Strategies : Sorting Out the Plastic

    BETTER BUGS Ideas and products in the Better Bugs category attempt to affect the biological components and biochemistry of processes by altering the mix of microorganisms or enzymes present. After all, biology is the foundation of many, if not most, organics recycling systems. Pyrophiles: The first example of Better Bugs involves pyrophilic organisms, bugs that can take the heat. This example is ...


    By BioCycle Magazine

  • Dispersed Phase Inertisation (DPI): A New Technology for the Treatment of Landfill Leachate and Complex Water

    Inertisation is thus far the only technology for the conversion of leachate and contaminated water into an inert product, thereby facilitating handling and disposal in MSW landfills. Introduction One of the most complex aspects of the global management of an MSW landfill or treatment plant is leachate. This liquid comes mainly from the degradation of organic matter, added to other ...


    By Energy & Waste S.l

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you