point-of-use water Articles

  • Water Treatment Optimization - Case Study

    Drinking water treatment in North America has stringent requirements for effluent water quality, with a great amount of attention being drawn to the presence of hazardous disinfection by-products (DBPs) persisting through water distribution systems. The operation of water treatment plants involves addition of various mixing agents to help with coagulation and settling of organics in the raw water ...


    By MANTECH

  • Water Treatment System Types and Their Benefits

    Water is one of the most important utilities in the world. It’s used for bathing, cooking, washing clothes, cleaning dishes, and drinking. If you get your water from the city, you trust your tap water to be clean and healthy. It goes through a treatment plant before it reaches you, so it’s perfectly purified when it reaches you—right? Unfortunately, this isn’t always the ...

  • PeCOD® Analyzer oxygen demand analysis for source & treated drinking waters

    MANTECH’s chemical oxygen demand (COD) analyzer is breaking new ground in the science of monitoring source and treated drinking water. In addition to providing 15-minute COD results and biochemical oxygen demand (BOD) estimates, MANTECH’s PeCOD® Analyzer measures natural organic matter (NOM) in raw and treated drinking water. The NOM Analyzer™  — which is the ...


    By MANTECH

  • A new and improved courtyard at Wynberg Girls High School in Cape Town with Geoplast Drainroof - Case Study

    Drainroof, Geoplast’s solution for roof gardens made of recycled low-density propylene, was recently chosen for alterations at Wynberg Girls High School in Cape Town. Noero Architects, a prestigious architectural firm with offices in Cape Town and Port Elizabeth, conceived and supervised the project, while Abrach Construction carried it out. De Villiers & Hulme participated as ...


    By Geoplast US Corp.

  • Measuring CO2 to Optimise the Bulk Storage of Food

    Meeting the food requirements of a growing global population is becoming increasingly difficult. Despite the need for additional food, it is estimated that 50-60% of grain is lost after harvesting, at a cost of about $1 trillion per year.1 One of the major reasons for lost grain is spoilage due to mould or insect infestation during storage.2 To provide a ...


    By Edinburgh Instruments Ltd

  • Point of use/point of entry treatment with LFNano

    EconoPure Water Systems EconoPure Water Systems designs and manufactures highly economical, scalable, low‐fouling membrane systems. The Company leverages the proprietary low‐fouling nanofiltration (“LFNano”) system consisting of a unique membrane element that is designed to avoid particulate fouling, biofouling and scaling. As the name suggests, the LFNano utilizes ...

  • Membrane biofouling mitigation through applying electric potential in the CF016 cell

    Membrane filtration is an effective way to remove pollutants and microorganisms from water and wastewater. However, membrane fouling lowers efficiency over time when considering rejection values and water flux.  Fouling is typically biological or particulate; fouling rate is a function of the membrane pore size relative to the size of the foulants and also the interactions between the ...


    By Sterlitech Corporation

  • A Case for Point-of-Use RO Ultrapure Water Systems

    ULTRAPURE WATER CRITERIA - AN OVERVIEW 'Pure water' is a relative term. Practically speaking, no water, naturally occurring or treated by man, consists solely of H2O molecules. Forever in pursuit of achieving equilibrium with its surroundings, water has unique characteristics that result in its ability to dissolve most matter. This property of water to dissolve and transport materials is ...

  • A quick guide to oil analysis for engine test applications

    Reliability testing is a very important component of new engine development. Engineers need to fully understand and chart the engine lifetime performance under a variety of conditions before mass production may be considered. Many important performance data parameters are collected in real time through the many different types of sensors that are connected to the engine in the test cell and oil ...


    By Spectro Scientific

  • 13 surprising tools a plumber needs

    What tools does a plumber need in their tool box? Professional installers tell us they use these top 13 plumbing tools time and again. Our list of surprising plumbing tools goes beyond your day-to-day staples of a good hacksaw, a set of well-engineered adjustable spanners, basin spanners, screwdrivers and a decent tape measure. Great all-rounder plumbing tools ...


    By Kingspan Environmental Ltd

  • Studies on Geocell Reinforced Road Pavement Structures – Rajagopal, Veeragavan, Chamdramouli, 2012

    Too often, the scarcity or distance of natural resources, makes the strengthening of highway pavements a costly or lengthy exercise. Building on previous studies by Bathurst, Han, Pokharel and others, this study published in Geosynthetics Asia, provides academic proof that NPA Geocell reinforcement increases the stiffness and elastic modulus of pavements. Validation – Field ...


    By PRS Geo-Technologies

  • Maintenance To-Do: Coil Cleaning

    A coil-cleaning program should be an integral part of maintaining some kinds of process cooling equipment. Most people think of coil cleaning as a building or facility prepares to turn on the air-conditioners for another season. Admittedly, spring is a perfect time to put such cleaning and maintenance at the top of the to-do list. Condenser and evaporator coils are an integral part of HVAC ...


    By Evapco Inc.

  • Quality assurance and Quality control technical note

    Introduction For almost 50 years HYDROLAB products have provided dependable sensor technology in a multiple parameter instrument for montioring essential indicators required for assessing water quality in natural waters. Useable data are the lifeblood of any environmental water quality monitoring program and variation in measurement processes impairs the quality of the data that water ...


    By The OTT Hydromet Group

  • Contaminated soils and sludge treatment plant - Case Study

    Client: Ecosistem Group, Lamezia Terme (CZ) – Italy Challenge: to transform waste into product! The Client possesses a large plant for the treatment of products contaminated with hazardous substances and materials, recycling of recovered materials and disposal of non-recyclable waste, which is considered highly ...


    By Baioni Crushing Plants Spa

  • How to generate an accurate load profile for CHP

    If you fail to accurately work out your site's energy demands, you'll give rise to a cogeneration system that underwhelms when served up to your customer. That's why load profiling is the key ingredient in successfully specifying your cogeneration project and ensuring that you meet your clients' expectations. Generating an accurate ...


    By ENER-G

  • A compact point-of-use water purification cartridge for household use in developing countries

    Simple, low-cost household interventions are known to be effective in lowering the incidence of waterborne diseases in developing countries. However, high costs along with operational and maintenance issues have prevented the successful adoption of these interventions among the affected communities. To address these limitations, a cost-effective, gravity-driven water purification cartridge has ...


    By IWA Publishing

  • Hom’: a simple point of use water treatment device

    This study sought to explore a locally assembled ‘Hom’ point of use water treatment device by assessing aspects of its performance and possible effects of using it on compliant households and communities. The conceptual framework highlights poverty and environmental degradation as causes and consequences of one another, with ill-health caused by water-borne diseases reinforcing both to form a ...


    By IWA Publishing

  • Factors influencing nitrification in point-of-use BioSand filters

    The BioSand filter (BSF) is a point-of-use treatment technology used in developing countries to improve drinking water quality. Studies on the BSF to date have mainly focused on bacterial, protozoan and virus reduction and less on the filter's effect on chemical contaminants that may also affect human health. This study explored the potential for nitrification in field-scale trials of ...


    By IWA Publishing

  • Demonstration and evaluation of germicidal UV-LEDs for point-of-use water disinfection

    Ultraviolet (UV) irradiation is a common disinfection option for water treatment in the developed world. There are a few systems installed in developing countries for point-of-use treatment, but the low-pressure mercury lamps currently used as the UV irradiation source have a number of sustainability issues including a fragile envelope, a lifetime of approximately one year, and they contain ...


    By IWA Publishing

  • Point-of-use chlorination of turbid water: results from a field study in Tanzania

    Household-based chlorine disinfection is widely effective against waterborne bacteria and viruses, and may be among the most inexpensive and accessible options for household water treatment. The microbiological effectiveness of chlorine is limited, however, by turbidity. In Tanzania, there are no guidelines on water chlorination at household level, and limited data on whether dosing guidelines ...


    By IWA Publishing

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you