point-source wastewater pretreatment solution Articles

  • A solution to fracturing water supply and disposal issues

    “Water, water, everywhere, Nor any drop to drink.” –The Rime of the Ancient Mariner, Samuel Taylor Coleridge Many topics of conversation among oil and gas industry professionals are predictable – oil price trends, the “great shift change” imperiling the available workforce, and production quotas and caps from OPEC. Yet one pressing topic among those developing ...


    By Fairmount Santrol

  • Monitoring and Controlling Pretreated Liquid Waste

    Intelligent dataTaker System Handles All Data Collection CAS DataLoggers has just provided an intelligent data logger for a manufacturer facing stringent environmental regulations requiring them to continuously monitor and manage their effluent disposal. Before effluent is discharged from the facility, it had to be heavily ...


    By CAS DATALOGGERS

  • Skimming Oily Wastewater

    As large generators of oily wastewater tighten effluent controls, the U.S. Environmental Protection Agency (EPA) is targeting smaller generators. Some of the firms receiving their attention are smaller manufacturing plants, automotive garages, mobile equipment service shops and truck farms. Many of these firms do not have access to a sanitary sewer system that will accept oily wastewater. Because ...


    By Abanaki Corporation

  • Waste Management Solutions for Business

    How to win the race for everyone Waste Management Solutions for Business Industry will always lead the way in the adaptation of new technology, and especially the technology of conservation. This is not necessarily for any ideological reason, but because the people who manage water use better understand the economic incentives for adopting new ...

  • Electrocoagulation Wastewater Treatment – An Application To Sustainably Reuse Textile Wastewater

    The textile industry is a water consumption intensive industry. Water is utilized for cleaning the raw material, and for the different steps in the textile dyeing process. Due to the effects of water scarcity and stricter environmental regulations, the cost of fresh water utilization has increased worldwide. In addition, the textile industry is faced with pressure by government regulators to move ...

  • Electrocoagulation Wastewater Treatment: Specialized Technology to meet the needs of food & beverage wastewater

    The effects of water scarcity and stricter environmental regulations placed on water usage are increasing the cost of using freshwater globally. The consequences of these increasing costs on food and beverage companies are twofold, since the companies are charged for both the water that they utilize in their processes and on their wastewater discharge. Additionally, the food and beverage industry ...

  • Process Water Treatment – Challenges and Solutions

    Untitled Document Clean water is needed by chemical-process plants for a wide range of process-related and auxiliary uses. Likewise wide is the range of options available to the ...


  • Introduction to Decentralized Packaged Wastewater Treatment (PWWT) Systems - PDH Article

    Learning Objectives After reading this article, you should understand: Functions and processes of a decentralized PWWT system; Design considerations of a PWWT system. Overview "Clean water will be the oil of the 21st Century." The accuracy and magnitude of this statement is resonating worldwide. ...

  • Allegheny Ludlum uses Abanaki to support world-class wastewater treatment standards

    Allegheny Ludlum Corporation is a world leader in the technology, production and marketing of specialty materials - from stainless and silicon- electrical steels to titanium, nickel alloys and other advanced alloys. Its customers represent diversified consumer and capital goods markets in more than 30 nations. In keeping with the company's ISO 9001-certified quality system, the leader goes well ...


    By Abanaki Corporation

  • Utilizing unconventional water sources for industrial reuse

    Reclamation and reuse of unconventional wastewater sources for plant raw water, cooling water and process pre-treatment has increased substantially due to increases in the cost of drinking water, recurring water shortages that can impact business operations, and tightening government regulation. Water is required in almost every industrial sector for the processing and manufacture of products. ...


    By WesTech Engineering, Inc.

  • Saving Money with your Wastestream

    Many industries aren’t aware that there are simple, cost effective solutions to lower the surcharges they are paying to the Publicly Owned Treatment Works (POTW’s). When the POTW is treating wastewater from an industrial source, they will charge the industry a surcharge to cover the additional cost of treating the industrial waste. Surcharging industries is a common practice since most industries ...


    By Integrated Engineers Inc.

  • Sustainable recycling-bioFLOW case study

    The Problem: The Sustainable Recycling Company is a centralized wastewater treatment (CWT) facility located in Connecticut. They process oily wastewater streams from a variety of sources via an integrated treatment process using collection, oil water separation, ultrafiltration, chemical precipitation. The pretreated wastewater is highly loaded with BOD and COD and the local ...


    By BioprocessH2O

  • The Challenge of the Future: Operating Emerging Disinfection Technologies

    ABSTRACTThe Clean Water Act (1972 and 1977) established the basis for regulating pollutant discharges into the waters of the United States. This Act contains many provisions regulating pollutant discharges and surface water quality in the United States. This act has also been modified by numerous revisions and amendments since it was enacted in 1972. The National Pollutant Discharge Elimination ...

  • Sustainable Recycling Company-bioFAS MBBR case study

    The Problem: The Sustainable Recycling Company centralized wastewater treatment (CWT) facility located in Connecticut. They process oily wastewater streams from a variety of sources via an integrated treatment process using collection, oil water separation, ultrafiltration, chemical precipitation. The pretreated wastewater is highly loaded with BOD and COD and the ...


    By BioprocessH2O

  • What Is Zero Liquid Discharge and How Does It Work?

    Not every industrial facility that produces wastewater will require zero liquid discharge (ZLD). It is usually looked to as a last resort because it can be a complex process that requires a high initial investment. If a facility is located on a site that has severe water scarcity issues and/or astronomical discharge fees, it might be ...


    By SAMCO Technologies, Inc.

  • Electroplating Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Five common problems with zero liquid discharge and how to solve them

    As more and more facilities are turning to zero liquid discharge (ZLD) for wastewater treatment and effluent reduction—whether it’s to comply with local discharge regulations or recycle and reuse as much water as possible in your process—more information is becoming available about the possible issues your facility might face while using ZLD technology. Because of the scope of ...


    By SAMCO Technologies, Inc.

  • Do You Need a Microfiltration or Ultrafiltration Membrane System for Your Plant?

    Determining whether or not an industrial plant needs a microfiltration (MF) and/or ultrafiltration (UF) membrane system isn’t always as straightforward as it seems. While these systems are not essential for every industrial process, when thoughtfully implemented within an intake, process, or waste stream, they can go a long way in improving a facility’s efficiency and/or cutting ...


    By SAMCO Technologies, Inc.

  • Microfiltration vs Ultrafiltration Processes: What is the Difference?

    Microfiltration (MF) and ultrafiltration (UF) are both processes by which a contaminated liquid is passed through a semipermeable membrane that removes solids too large to fit through the membrane’s pore size, yielding a purified liquid stream. To what degree the stream is purified depends on the contaminants present and the pore size of the membrane. MF and UF are generally ...


    By SAMCO Technologies, Inc.

  • Microfiltration and Ultrafiltration Membrane Systems: Common Problems and How to Fix Them

    Microfiltration (MF) and Ultrafiltration (UF) are membrane-based filtering technologies that use thin layers of semipermeable material to separate out contaminating particles, such as organic material, bacteria, suspended solids, and other pollutants. In industries such and dairy, pharmaceutical, and chemical, the separated material may be a product they are recovering, and more facilities ...


    By SAMCO Technologies, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you