pollution control equipment Articles
-
Regenerative Thermal Oxidizer Installation #1296 Coil Manufacturer in Clayton, NJ - Case Study
A coil manufacturer replaces pollution control equipment with the help of Alliance Corporation. Application: Thermal – Clayton, NJ Project: A 8,000 SCFM TRITON™ Regenerative Thermal Oxidizer. Installed by customer. ...
-
Maintenance solutions for air pollution control equipment
Manufacturing facilities are constantly under pressure to meet production forecasts at the lowest possible cost. These two goals; production output and cost control, can be difficult to obtain consistently in any manufacturing operation. Additional frustration to meet these goals can be exaggerated in today’s lean manufacturing climates that have trimmed budgets and reduced workforce. ...
-
Fume Scrubber for Grain Etch, Metal Finishing, and Other Operations Generating Fumes and Gases
World's Largest Investment Casting Company Selects Tri-Mer for Air Pollution Control. Tri-Mer engineered and built air pollution control equipment for Alcoa Howmet's grain etch facility, which houses two process lines. Contaminants include hydrochloric acid, ferric chloride and phosphoric acid. The phosphoric acid line includes a Tri-Mer Vertical Flow (V-F) Scrubber, and 6-stage tank line. The ...
-
Fight Covid-19 with Symbiosis Air Pollution Control Equipments
Among the manifold health risks of increasing air pollution; one of the most emerging one is the risk of contracting COVID-19. People living and working in high-pollution areas are more likely to have compromised respiratory, cardiac and other systems; and are therefore more vulnerable to COVID-19’s impacts. As particulate matter has the potential to act as carriers for contagion leading to ...
-
How to Obtain an Air Pollution Construction Permit Infographic
Today, U.S. Environmental Protection Agency (EPA) is more aggressively pursuing enforcement actions against industrial sources than ever before. This is a result of EPA desire to generate revenue, as well as reflecting the desires of current leadership. In this regulatory climate, it’s increasingly important for emission unit operators to understand enforcement risks and liabilities. ...
-
Trace elements - controlling emissions from coal combustion
International and national legislation is increasingly being applied to trace element emissions. Although emissions have decreased for a variety of reasons in many developed countries, continued use of coal and more successful control strategies in other sectors mean that coal combustion is still a relatively important source of some trace elements, especially mercury. Existing pollution control ...
-
Silicone converter succeeds with custom air pollution control equipment - Case study
Many industries utilize silicone as an ingredient in their manufactured product. Silicone enhances the attributes of the product or helps to improve production characteristics. Whatever the reason may be, users of solvent borne silicone's all face very troubling issues when it comes to the selection of the right air pollution control system. Among the air pollution control choices available to ...
-
Innovative Dryer and Emission Control System at a Particleboard Installation
In 1989, Bohemia Corporation installed a new primary drying system and also air pollution control equipment at their particleboard plant in Eugene, Oregon. The drying system was composed of a Westec America triple-pass rotary drum dryer fired by a Coen sanderdust burner. The primary and secondary particulate collectors installed were also of a Westec America design. The tertiary air pollution ...
-
Why you should get proactive with oxidizer maintenance this spring
Spring has sprung; the sun is shining longer, flowers and trees are blooming, and the snow is gone (well, in most parts anyway). Plans are being made for summer vacations, graduations, weddings, and oxidizer maintenance. Your company has invested a lot of money into its air pollution control system. Your team was trained on how to perform the recommended maintenance as called out in the ...
-
Repair, retrofit, and rebuild services for amine treating acid gas process - Case Study
Catalytic Products International (CPI) was recently engaged by a Western Colorado Gas Processing Facility to review the existing amine treating acid gas process and the air pollution control equipment installed in an effort to help optimize the units and make improvements to the reliability of the entire system. Introduction: Identify root cause of numerous failures and create an action plan to ...
-
Pollution prevention and control, North-East England
Project Remediation Strategies were commissioned to assist an electronic components manufacturing facility in the North-East of England with the emergency preparedness and response aspects of an ISO 14001 accreditation process. Workscope Through numerous visits to site, we were able to gain an understanding of site operations and activities that could potentially give rise to a pollution ...
-
Polish gas from Polish coal: environmental benefits
The development of coalbed methane gas from Polish coal offers a significant opportunity to reduce noxious pollutant emissions associated with coal combustion. A review of energy supply and consumption within Poland, and of available coalbed methane resources, indicates that use of coalbed methane could eliminate 40-60 million tonnes of sulfur dioxide and particulates from the atmosphere, save ...
-
Controlling Hazardous Air Emissions With A Catalytic Oxidizer
As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment. With well over twenty years of proven success, catalytic oxidation is a popular method for controlling volatile organic compound (VOC) emissions.During the past 25 years, industry has made progress in ...
-
Achieving Air Pollution Control With Catalytic Or Thermal Oxidizers
As the full effect of the Federal Clean Air Act (CAA) Amendments passed by Congress in 1990 continue to impact today's industry, many manufacturing operations have become subject to stricter local, State and Federal clean air regulations. Both VOC (volatile organic compound) and HAP (hazardous air pollutant) emissions are strictly regulated since they lead to the formation of ground level ozone ...
-
Expert Installation Services Soar to New Heights
Along with providing equipment to solve customer’s complex VOC, NOx, and Odor pollution challenges, we also provide installation services. I was on site for the recent “lift” of a new QUADRANT SR-35,000 Thermal Oxidizer (TO). Capital equipment, like a Thermal Oxidizer, is designed to operate for many years; however wear and tear eventually may require the equipment to be ...
-
Case study - Converter finds affordable compliance solution
Overview It’s not just about increasing production for Fredman Bag’s president, Tim Fredman Jr., it’s also about being a environmentally conscious neighbor. A converter’s decision to expand their capacity is often made more complicated by a corresponding need to invest in air pollution control equipment. Recent expansions had Fredman Bag making major investments in their ...
-
3 High Payback Oxidizer Retrofits for Lean Budgets
2020 has been the year many manufacturers have had to pivot into to the unknown. Your pollution control equipment must be considered as you make key business decisions. Whatever your new business landscape, Anguil is ready to assess your current equipment, production requirements, and capacities to develop a strategy that meets your emerging business needs. Have you had to make any of these ...
-
Catalytic Oxidizers
As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many different companies will be required to install air pollution control equipment. With more than twenty-five years of proven success, catalytic oxidation continues to be a popular method for controlling volatile organic compound (VOC) emissions. According to the Clean Air Act, any organic ...
-
What`s the Best Air Pollution Control Technology for My Process?
Air pollution control equipment is not something that business owners address by saying, “Let’s do the right thing for the environment and install an oxidizer!” In fact, the scenario is more likely to be “We need to increase productivity (always a good thing!), but that will put us over our annual emissions limits. Do we know what we will need? Where do we start? Who can ...
-
Achieving Air Pollution Control with Catalytic or Thermal Oxidizers
As the full effect of 1990’s Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many manufacturing operations have become subject to stricter local, state and federal clean air regulations. Both VOC (volatile organic compound) and HAP (hazardous air pollutant) emissions are strictly regulated since they lead to the formation of ground-level ozone (or smog). The CAA ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you