pollution control industry Articles

  • What is a wastewater treatment system and how does it work?

    For industrial companies producing wastewater as part of it’s process, some type of wastewater treatment system is usually necessary to ensure safety precautions and discharge regulations are met. The most appropriate wastewater treatment system will help the facility avoid harming the environment, human health, and a facility’s process or products (especially if the wastewater ...


    By SAMCO Technologies, Inc.

  • What are the best companies for Zero Liquid Discharge Equipment and Technology?

    With an increasing push for environmental protection, many industrial facilities and effluent regulators are making decisions that lessen their impact on the environment and human health. Changes and implementations are constantly being discussed and met both nationally and internationally to change the way industrial facilities discharge waste, and it is important to know which companies are the ...


    By SAMCO Technologies, Inc.

  • Biosolids ban struck down

    In 1994, Los Angeles County Sanitation Districts (LACSD) bought a 4,700-acre farm (called Green Acres Farm) in southwest Kern County for the purpose of land applying biosolids from its 11 wastewater treatment plants. LACSD land applied 800 wet tons/day at this site for several years. In 2006, Kern County voters passed Measure E on the ballot with 83 percent approval. This measure banned ...


    By BioCycle Magazine

  • Air Pollution Control in the Flexographic Printing Industry

    A basic review of technologies used, and selection criteria to consider, to successfully control the VOC/HAP emissions exhausted from flexographic printing presses. Within the flexographic printing industry, the use of an Air Pollution Control System (APCS) to control harmful air pollutants is not new. Today, because of business expansion, modifications to plant operations, or changes in ...


    By The CMM Group, LLC

  • Air Pollution Control in the Printing and Web Coating Industries

    For many U.S. companies in the printing and web coating business, the use of an Air Pollution Control System (APCS) to control harmful air pollutants is not new.  In these industries, depending upon their location, companies have been installing APCS since the early 1970's.  However, for some companies the clock is still ticking regarding their compliance with local, state and federal ...


    By The CMM Group, LLC

  • Principal Noise Pollution Control

    Sources of noise in industrial machinery and processes are : Rotors, Gears, Turbulent Fluid Flow, Impact Processes, Electrical Machines, Internal Combustion Engines, Pneumatic Equipment, Crushing, Blasting, Pumps and Compressors. The most desirable method of controlling a noise pollution is to minimize the noise at the source. This generally means modifying existing equipment and structures or ...

  • Air Pollution Control Specs

    As the full effect of the federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment.  With more than 25 years of proven success in a variety of industries, catalytic and thermal oxidation has become a popular method for controlling volatile organic compound (VOC) and hazardous air ...


    By The CMM Group, LLC

  • Pollution monitoring in Cement Industry

    The rising use of waste based fuels in the cement industry, both for economic and Environmental objectives, combined with the strengthening of air emission regulations around the world is pushing many operators to face a wider list of pollutants to monitor this, with associated costs. The design of appropriate solutions meeting local regulation is the key to maximize the cost benefit of the fuel ...


    By Environnement S.A

  • Alternative Fuels for Air Pollution Control

    Non-traditional, alternative fuels are all the rage now, especially with government pressure forcing increasing numbers of fossil-fired assets to shut down. While wind and solar have a place in our energy future, neither is reliable or inexpensive enough to be the complete answer.  Industry is looking for new fuels that can replace coal, oil and natural gas. Proposed alternative fuels come ...

  • Controlling Air Pollutants case study

    While it's not always easy to determine what's required for compliance, new technologies can help achieve air-pollution control Selecting air-pollution control equipment can be tricky. It's not only difficult to determine which pollutants must be controlled, but also which type of equipment will best control them to required levels for any given process or facility because there is no ...


    By Bionomic Industries Inc.

  • Water pollution control and strategies in Finnish pulp and paper industries in the 20th century

    This paper discusses and analyses the evolution of the Finnish pulp and paper industries and their water pollution control strategies. The Finnish pulp and paper mills are mainly located along water courses in inland areas. The earliest documents on water pollution date back to the early 1900s. In spite of the remarkably good record during recent decades in water pollution control, it can be ...


    By Inderscience Publishers

  • Strategy for Complying with Air Pollution Control Regulations in the Chemical Industry

    Untitled Document The Clean Air Act (CAA) was originally passed by the United States Congress in 1970 and subsequently revised in 1977 for the purpose of protecting human health ...


    By Trinity Consultants

  • Case History - Air Pollution Control in the Textile Industry: a Technology for the 21st Century

    The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well into the 21st century. The nature of the problem The major air pollution problem in the textile industry occurs during the finishing stages, ...


  • Electroplating Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Breweries Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum emissions levels that are ...


    By The World Bank

  • Textiles Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Industrial Estates Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Printing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Foundries Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Dairy Industry Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you