polymer mixer Articles

  • The design of static mixer heat transfer equipment for adhesives, sealants, resins and polymers.

    The fluids handled within the adhesives and sealant industries are amongst the most difficult to handle of any in the main process industries globally. The characteristics which make them particularly difficult to handle include: High viscosities (typically 1-2000 Pa.s, or 1000 to 2 million cP). Often non-Newtonian (viscosity is not constant and varies with shear rate). Some ...


    By National Oilwell Varco

  • SAP (Superabsorbent Polymers) - case study

    Superabsorbers (SAP, superabsorbent polymers) are plastics, which are able to absorb 1000 times their own weight in liquid. The main areas of application are baby nappies as well as products for female hygiene and incontinence care. The task for AVA was to improve the existing SAP product quality, to increase the throughput of the overall plant, and to enable several process stages to be ...


    By AVA - Huep GmbH u. Co. KG

  • Impact of heating method on the flocculation process using thermosensitive polymer

     Flocculation process based on water soluble polymers as flocculating agents is still intensively researched nowadays, despite the introduction of these materials about fifty years ago. There is a need to gain the full control of this process in order to obtain high efficiency and strictly define products. For that purpose new solutions are proposed like stimuli-responsive macromolecules. In ...


    By IWA Publishing

  • Drum mixer compounds wide range of particles... and a modified paddle mixer solves a tricky problem

    In 1985 Mortex Manufacturing Co., Inc., bought a new rotary drum mixer in anticipation of expanding its line of chemical additives that are used to make decorative, nonskid coatings for concrete around swimming pools and on patios. The additives are mixed with white cement and white ...

  • Waste Water Treatment Plant City of Oakley, UT

    The City of Oakley was very happy with their new MBR facility except for the filter bag sludge dewatering system that was very labor intensive and usually didn’t produce an adequately dewatered sludge. Scott Rogers of Aqua Engineering and Bob Johnson, the Operations Mgr., chose to replace the bag system with a 0.9 meter model DDP belt press system from BDP Industries. The DDP belt press ...


    By BDP Industries

  • NOV Offers a White Paper on Kenics™ Heat Transfer Equipment for Adhesives and Sealants Applications

    NOV is offering a white paper that discusses the use of Kenics static mixer heat transfer equipment for adhesives, sealants, resins and polymers. The white paper describes the design aspects of heat transfer equipment and how it benefits end users in adhesives and sealant applications. The white paper goes into great detail on the: Heating and cooling processes used in the industry ...


    By National Oilwell Varco

  • Waste Water Treatment Plant Thunder Valley Casino, CA

    The Waste Water Treatment Plant at the Thunder Valley Casino was in need of a cost effective way to clean out their settling ponds and then process the solids from their new Membrane Bio Reactor (MBR). However, they did not have the space yet for a permanent installation. The ponds needed to be emptied before a building could be constructed for the dewatering equipment. BDP was able to meet the ...


    By BDP Industries

  • Wastewater Treatment Plant Village of Rouses Point, NY

    The Village of Rouses Point has been a BDP customer since 1990 when they purchased a 1.0m BDP Model ‘E’. During the latest expansion of their facility, the plant evaluated various options for increasing the hydraulic throughput of their dewatering system. BDP was the press of choice due to the 3DPTM belt filter press superior performance, simplified room layout and first class ...


    By BDP Industries

  • Case Study: Truck Wash

    This facility washes out the internal tanks of tanker trucks. Generating 10,000 gallons/day of wastewater consisting of the residual liquid within the tanks combined with soaps, acids, and caustic cleaning products. The wastewater flowed into a central sump and was pumped into one of their two 5000 gallon Reaction Tanks. The operator then added Ferric Chloride (40 gallons), sulfuric acid (10 ...


    By Integrated Engineers Inc.

  • Corrugating Facility Redesign Wastewater Optimization Case Study

    Paper & Pulp Industry Case Studies Corrugating Facility Wastewater Optimization Integrated Engineers, Inc. modified a corrugating facility in Southern California that required a design build ...


    By Integrated Engineers Inc.

  • Plastics pellet manufacturer eliminates blend problems with uniquely designed rotary blender

    Having no internal moving elements, blender achieves 100% discharge eliminating process problems. To remain competitive in a widening world economy, manufacturers have to provide quality products at world market competitive prices. This has forced American manufacturers to rethink their approach to manufacturing. Particularly, rethink the cost effectiveness of their ...

  • Processing Wastewater Sludge Using Dewatering Containers

    The relative cost of dewatering equipment varies widely and is directly related to the processing rate. For smaller utilities that need to dewater sludge in batches, dewatering containers are an alternative that can be relatively inexpensive and simple when compared to other technologies on the market. The most common type of dewatering container is based on a roll-off box design, although any ...


    By Flo Trend® Systems, Inc.

  • Case study - rendering retrofit

    Challenge A prominent rendering facility in the southeastern United States was faced with loadings that were too high for the existing dissolved air flotation (DAF) unit. To minimize the amount of carry-over into their secondary system, they were forced to run at a very slow rate. Still, too many solids were being discharged from the existing DAF into the anaerobic pond. The ...


    By Clean Water Technology, Inc.

  • Activated Sludge Treatment Plant - Eatonton, Georgia - Case Study

    Solids management at municipal wastewater treatment plants is crucial in maintaining operating efficiencies and permitted discharge levels. Drying beds and mechanical methods of dewatering bio-solids can be labor intensive and inefficient for rapid solids removal. Miratech Geotube" Dewatering Technology offers munic-ipalities a cost effective solution for rapid solids removal and long term solids ...

  • Drilling Mud Circulation System

    As more utility contractors are moving up to larger rigs, they are also moving toward the use of solids removal ( solids control ) systems. These solids control systems are not stand-alone units. They are part of the drilling mud system along with the ...


  • Drilling Mud and Mud Circulation System

    As more utility contractors are moving up to larger rigs, they are also moving toward the use of solids removal ( solid control ) systems. These solid control systems are not stand-alone units. They are part of the drilling fluids system along with the drilling fluid and the fluid pump. ...


  • Multi-barrier water treatment cleans up turbidity spikes

    When the City of Bloomfield, N.M., was notified by the New Mexico Environmental Department that it had 18 months to bring its drinking water treatment plant into compliance with the Interim Enhanced Surface Water Treatment Rule (IESWTR), they needed a fast, innovative solution. Under the IESWTR, the city was challenged to meet regulatory compliance on turbidity levels. During seasonal runoff ...


    By WesTech Engineering, Inc.

  • Wastewater-Primary Treatment

    Primary Treatment is defined as a wastewater treatment process that takes place in a rectangular or circular tank and allows those substances in wastewater that readily settle or float to be separated from the water being treated. This process achieves solids separation. The solids readily available to settle to achieve sedimentation will do so in a settling tank referred as a clarifier. On the ...

  • Multi-Barrier water treatment cleans up turbidity spikes

    When the city of Bloomfield, N.M., was notified by the New Mexico Environmental Department that it had 18 months to bring its drinking water treatment plant into compliance with the Interim Enhanced Surface Water Treatment Rule (IESWTR), the city needed a fast, innovative solution. Under the IESWTR, the city was challenged to meet regulatory compliance on turbidity levels. During seasonal runoff ...


    By WesTech Engineering, Inc.

  • Exterior coatings producer blends abrasives with no shaft seal wear

    Since its founding in 1987, contractors have applied over 100 million square feet of Master Wall Inc. products — stucco, coatings, and exterior insulation and finish systems (EIFS) — on residential, commercial and industrial buildings. Master Wall founder and president Steve Smithwick says the company's Aggre-flex EIFS system is "one of the most common commercial cladding in the ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you