portable laboratory instrument manufacturer Articles

  • Tech update: Plant instrumentation - food engineering

    Sensors and other devices are the foot soldiers in automation architecture, but most food and beverage manufacturers still are looking for full value. You know an equipment category has arrived when it starts getting its own industry-specific center. For the food production sensors that do the heavy lifting in instrumentation technology, that day could arrive earlier rather than ...


    By Hardy Process Solutions

  • The use of portable and handheld Raman spectroscopy for forensic investigations

    The Raman technique is gaining widespread acceptance as an investigative tool for forensic applications. This article focuses on the use of portable and handheld Raman spectroscopy in the field of forensic science and illustrates it with real-world examples. The benefits of Raman spectroscopy are well recognized for the molecular identification of unknown molecular compounds and as a result the ...


    By B&W Tek

  • Portable lead analyzer to locate source of lead

    OBJECTIVE: To investigate the sources of lead in the environment in children with elevated blood, with the help of a Field Portable X-Ray ...

  • Sample Handling Strategies for Accurate Lead-In-Soil Measurements in the Field and Laboratory

    ABSTRACT The inhomogenous lead-in-soil matrix can present serious obstacles to accurate sample collection and handling. In typical lead-in-soil measurement, particle size related errors in sampling and sample handling often exceed all other sources of error. The magnitude of error can vary widely depending on the particulate nature of the lead contaminant and the effectiveness of control ...

  • Exoscan FTIR instrument system can easily be used in the lab or taken to the field for routine analysis.

    Infrared spectroscopy has long been recognized as a selective and sensitive technique for analysis and characterization of surfaces. From material identification to quantitative analysis, infrared analyses can establish if a surface is composed of the correct material, has the proper coating thickness, is free of contaminants, is properly cured, or has the correct properties for the next step in ...


  • Hired metals analyser ensures remediation success

    Cognition Land and Water Ltd, a UK based remediation specialist, has hired a portable XRF metals analyser to improve the speed of remediation work at a project in London’s Kentish Town. The project had a major impact on local residents so timescales were extremely tight but Cognition’s Charlie Jarvis says “It would not have been possible to meet the deadline without the use of ...


    By Ashtead Technology Ltd

  • Case study - GE and Severn Trent Services work together to gain UKAS accreditation for drinking water and waste waters

    Background Severn Trent Services (STS) is a leading provider of analytical services with a network of five laboratories and two service centers across the UK and Ireland. For over 20 years, STS has provided various analytical, sampling and monitoring services to meet customers’ requirements in areas such as potable water, waste water, groundwater, legionella, contaminated land, ...


    By GE Analytical Instruments

  • New ASTM Test Method Offers Quick and Easy Oil and Grease Measurement for Water and Soil Samples

    Onsite Field Measurement of Oil and Grease A quick and easy field analysis method for determining oil and grease concentration levels is important for both offshore oil platforms and soil remediation sites.. Prior to the Montreal Protocol, infrared (IR) analysis using Freon as an extraction solvent was a widely used field and laboratory method. In 1999, the U.S. EPA promulgated Method 1664A ...


    By Spectro Scientific

  • Increased demand for XRF analyser hire

    Steve Drake, NDT Market Manager at Ashtead Technology believes that XRF is one of the most important technologies in the company’s fleet of NDT and environmental testing instruments. “With a small amount of training, almost anyone can implement detailed inspections in a wide variety of applications, and with most instruments being lightweight and robust, XRF analysers are among the ...


    By Ashtead Technology Ltd

  • Heavy Metal Compliance per RoHS Directive - Case Study

    Background Compliance with RoHS (or the Restriction of Hazardous Substances Directive) is an important issue in manufacturing today. RoHS has been constantly evolving since its original adoption in the EU as RoHS 2002/95/EC in 2003. Its full name is “Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment.” As the ...


  • FTIR analyser improves anaesthetic gas detection at Torbay Hospital

    A unique gas measurement technology has enabled South Devon Healthcare’s Pharmacy Manufacturing Unit (PMU) at Torbay Hospital to conduct highly effective and detailed analysis of anaesthetic gases in a variety of hospital locations. The primary function of the PMU’s quality control department is to check active ingredient levels and sterility in manufactured pharmaceutical ...


    By Gasmet Technologies Oy

  • Performance-Based Measurement Systems

    Many of the Environmental Protection Agency's (EPA's) methods used to monitor air, water and soil for environmental contaminants prescribe step-by-step details on how the chemical analysis must be conducted and prohibit any deviations or variations. The EPA has recognized that monitoring equipment and technology have improved tremendously over the last few years; that environmental media do not ...


    By WSP | Parsons Brinckerhoff

  • X-MET8000 Expert in archaeometry, conservation and restoration – Ashmolean Museum

    The Ashmolean Museum, Oxford, UK Founded in 1683, at a time when the idea of the ‘museum’ was brand new, Britain’s first public museum, the Ashmolean, was initially the home of a collection of miscellaneous manmade and natural specimens and curiosities from every corner of the world, which was presented to the University by the wealthy antiquarian and polymath, Elias ...


    By Oxford Instruments plc

  • Monitoring greenhouse gases from biofuel crops

    Global issues such as climate change and energy security have driven rapid growth in renewable energy production - wind, solar, tidal, geothermal, hydro, biofuels etc. However, logically, each of these methods should deliver a net benefit in terms of greenhouse gas (GHG) reduction, so researchers in the United States have employed portable FTIR analysers to study the GHG emissions of biomass ...


    By Gasmet Technologies Oy

  • Unmanned remote and wireless CDM monitoring case study

    Remote and wireless monitoring technology to meet CDM requirements is in its infancy in Europe. Carbon trading is driving it globally, especially in North and South America. That experience and technology is now finding a demand in Europe and Asia in landfill, biogas from food and animal waste in digesters and water treatment sludge digestion. Methane recovery from landfill and anaerobic ...


    By Geotech

  • Evaluation of MCM hygrometer and validation system during - Case Study

    Evaluation of an MCM moisture analyser and validation system during start up of Platformer 4 at Shell Bukom, April 2005. Overview Platformer start up requires an accurate knowledge of moisture levels in order too prevent over cracking, help optimise yields and prevent early catalyst damage. The presence of chloride and other contaminants during start up often affect the water ...

  • The Gasmet story from an academic idea to a global business

    In this article, Dr Petri Jaakkola, founder and Chairman of Gasmet Technologies Oy explains how an idea shared by a group of researchers at the University of Oulu in Finland, during the early 1970s, developed into one of the world’s leading gas monitoring instrumentation manufacturers. Early history – technology development At first, the Finnish researchers understood ...


    By Gasmet Technologies Oy

  • LIMS Locates the Diamond in the Rough

    From the earliest days of digging into the earth for minerals, one question has been raised by all those seeking to make use of the materials the earth offers up:  what exactly have we dug up and is it what we hoped it would be?  Well we’re not panning for gold anymore and hoping for a glint of something shiny at the bottom of our pans, unless we hobbyists.  Modern ...

  • Mining Water Quality Application

    Isaac Plains Coal Mine Isaac Plains is an open cut coal mine, in Northern Queensland, Australia. The Isaac Plains Project operates under an Environmental Authority (EA). One of the environmental monitoring requirements which must be met is monitoring water. These include potable water, mine affected water, natural creek flows, water releases, groundwater and the receiving environment. The ...


    By ANDalyze

  • Advances in flashpoint testing: economic impact

    Flashpoint testing is one of the oldest methods of the ASTM D02 Committee on Petroleum Products and Lubricants, which was formed in 1904. The most prevalent standards are ASTM D56 (Tag Method), D92 (Cleveland Method), and D93 (Pensky-Martens Method). These classical techniques, commonly referred to as open-cup and closedcup methods, share a common principle: A test flame is lowered into the ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you