portable pump manufacturer Articles

  • Recycling municipal sludge with portable dredges

    Policing the pit. With today's emphasis on resource recovery, even burdensome and seemingly worthless materials are becoming increasingly valuable. Take municipal sludge, for example. For sewage treatment facilities wrestling with the problem of sludge disposal, Liquid Waste Technology may have the answer. The New Richmond, Wisconsin, USA company manufactures dredges and lagoon pumping equipment ...

  • Engine manufacturer saves $200,000 per year

    The Problem: A “Big 3” engine manufacturer was dumping their 140,000 gallon central coolant system over shutdown every year. As oil contamination, metal fines, and aluminum soaps built up in the fluid, plant engineers noticed that surface finish decreased and tooling usage increased. As a remedy, the system was dumped, cleaned, and recharged with fresh coolant. With a ...

  • Are environmental monitoring manufacturers pulling a fast one with back-to-base servicing?

    Geotech's users of environmental monitoring equipment are not alone in their frustration at having valuable equipment unavailable when they require servicing.  Is this just a money-making scam?  What do users get for their money?  By combining maximum possible local support with a 100-point factory full service schedule, Geotech believe they have the best balance of user ...


    By Geotech

  • Portable IR analyzers: the ideal measurement solution for biofuels blend quality and wastewater testing

    Two challenges facing the biofuels industry involve compliance with blend quality standards and wastewater regulations. According to a study done by the National Renewable Energy Laboratory, 1 the chief problem found with biodiesel blends was inaccurate blend ratios. Retail customers and fleet managers do not typically worry about whether the blend ratio is correct until a problem occurs. For ...


    By Spectro Scientific

  • Field Detection of Chlorinated Alkenes in Well Water using the FROG-4000 Portable GC - Case Study

    Introduction Defiant’s FROG 4000, a portable GCPID system, was used to identify and determine the concentration of chlorinated alkenes in several extraction wells located in Tacoma Washington. Split samples were taken at each well and sent to an offsite lab for analysis. This case study examines the field exercise and highlights the high degree of agreement between the offsite lab and ...


    By Northern ANI Solutions Ltd.

  • Crisafulli submersible pumps and power units-case study

    In June, 1997, Mr. Quinn of EPCO, the customer's designated agent, inspected the systems at Crisafulli's manufacturing plant, and these made in Montana pumping systems were tested and shipped to Siberia. SRS Crisafulli, Inc., founded in 1966, is one of a few select manufacturers of specialized, engineered pumping and dredging systems in the United States. From its beginning, SRS Crisafulli has ...


    By SRS Crisafulli, Inc.

  • Bypass Pumping System - How to choose the right pumping system to securely meet your objectives in a cost effective manner

    Many bypasses are similar in appearance and name, but it’s their subtle differences that require close attention to fully understand component performance parameters. To determine the right pump, we first need to understand many different aspects of the physical conditions of the application – Flow, Lift/Pump Strength, and Distance. FLOW – is the quantity of liquid being ...


    By Aquatech Dewatering Company

  • X-MET8000 Expert for rapid, on-site material verification at SPP Pumps Limited, Coleford, UK - case study

    SPP Pumps company background SPP was founded in 1875 by a British engineer after he bought the patent rights of the Pulsometer Pump from the American Thomas Hall. For more than 100 years SPP Pumps has been a leading manufacturer of centrifugal pumps and associated systems, providing high integrity services for diverse industries such as oil and gas production, airports, hotels, water ...


    By Oxford Instruments plc

  • Machine shop for oil and gas services provider wins when the chips are down

    Chip Filtering Keeps Machine Shop Coolant Clean Since 1976, Facility Engineer Jay Wilson has handled the HVAC, electrical, and other operational facility needs for a key Texas-based plant within the FMC Technologies, Inc. (FMCTI) family. This leading global provider of technology solutions for the energy industry and other industrial markets was twice named as the Most Admired Oil and Gas ...


    By Abanaki Corporation

  • Pollution prevention and control, Northern England

    Project Remediation Strategies were requested by a major prestige vehicle manufacturer based in North-West England to provide assistance in upgrading their production facility’s surface water protection measures. The site had recently experienced potential regulatory compliance issues with its surface water discharge and staff wanted to take positive action to prevent future ...


    By Remediation Strategies Ltd.

  • Environmental incident response, North-East England

    Project Remediation Strategies were requested to attend a manufacturing facility in North-East England following an overnight fire at the site. Fire-fighting operations and the site sprinkler system had created a large volume of contaminated run-off together with widespread flooding across the shop floor area of the manufacturing facility. Productivity was stopped across the ...


    By Remediation Strategies Ltd.

  • Equipment and technology review: rocscience tunneling applications

    Allen Gwynnes Pumps– name resurrected With a design and manufacturing history stretching back 150 years, Allen Gwynnes Pumps, a name long associated with the manufacture of large, performance critical pumps, is once again an active force in the market place, operating from its new head office location in Middlesbrough, UK. The company was acquired by NEI during the 1970’s, and then became part ...


    By Rocscience Inc.

  • Hungarian water companies use British Cranes

    Water companies in Hungary are benefiting from British innovation to handle pumps and other equipment in access shafts safely and economically after local handling specialist Modul Stor supplied compact cranes designed and manufactured by Penny Hydraulics in the UK. Some of the companies are using portable Davit Cranes ...


    By Water Active Ltd

  • Machining Coolant Recycling: Unidrive

     Unidrive Pty Ltd undertake extensive machining operations during the production of automotive components. In the past this resulted in the generation of 20,000 litres of waste coolant every week. By implementing a coolant recovery and recycling system, Unidrive have saved approximately $179,000 per annum as a result of more efficient coolant usage and management. ...


  • Stormwater Solids Reduction for NPDES Permits

    Finally obtaining a National Pollution Discharge Elimination System (NPDES) Permit is often a relief but is by far not the end of the story. Meeting the requirements of that permit often proves to be quite difficult and stiff fines are freely doled out to those who fail to meet regulatory limits. For one Midwest jet propulsion manufacturing facility, the issue of total daily solids discharge ...

  • Chemical cleaning is cost-effective, efficient

    Chemical cleaning is an important offering within Clean Harbors’ portfolio of industrial cleaning/maintenance services for refineries, petrochemical processors and other process manufacturers. Along with high-pressure cleaning, pigging, Tech Sonic sound wave cleaning and other technologies, chemical leaning is a safe, efficient and cost-effective way to remove corrosion, deposits, residual ...


    By Clean Harbors

  • Automated Treatment System Used to Solve a Costly and Environmentally Critical Wastewater Problem for an East Coast Utility

    BACKGROUND Hydrocarbon and particulate contamination in wastewater is a well-known environmental hazard.  Due to tightening environmental regulations, an ever-increasing source of such contamination in major cities comes from water collected from underground utility vaults and manhole water.  This contaminated water, contains a smorgasbord of potential contaminants from transformers, ground ...


    By Walchem, Iwaki America Inc.

  • How To Get The Best Out Of Linoleum Floor Cleaning Machines?

    Linoleum floor cleaning machines have to be different from other types of cleaning machines. Linoleum is, in many ways, different from other types of floor surfaces. The difference between linoleum and concrete or tiled surfaces is fairly obvious. However, it is not easy to distinguish between a vinyl floor and linoleum-covered floor. While both these surfaces look almost the same, there are ...


    By Daimer Industries Inc.

  • Inland diesel spill case study

    Introduction In January 2000 an oil spill occurred in the North of England. It was estimated up to 30,000 litres of diesel fuel had escaped the fuel storage tanks of a major factory due to a burst pipe. Fortunately most of the spilled oil found its way to a nearby drainage facility owned by the local Water Authority. Due to neglect the drainage outlet pipe that feeds ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you