portable water analyzer Articles

  • Comply with Highly Regulated Oil in Water Measurements Using Portable Infrared Analyzers

    The Petroleum Industry – both offshore and onshore -- has regulations that limit the amount of oil in discharged water.  Fixed filter infrared (IR) analyzers have been used to test oil levels in produced water on drilling platforms for over 45 years for a number of reasons. On oil rigs where real estate is at a premium, infrared analyzers such as the Wilks InfraCal TOG/TPH ...


    By Spectro Scientific

  • Simplified biofuels measurements with portable mid infrared analyzers

    Product quality begins at the production facility and extends to consumer filling station. Some process control or quality verification analyses can be done with quick and simple verification tests while others require more complete tests according to the ASTM or EN approved methods. Many crucial measurements can be performed by mid-infrared (IR) analysis. These measurements include free fatty ...


    By Spectro Scientific

  • Portable lead analyzer to locate source of lead

    OBJECTIVE: To investigate the sources of lead in the environment in children with elevated blood, with the help of a Field Portable X-Ray ...

  • Portable Infrared Analyzers Provide On-Site Measurement of Oil and Grease Levels in Hydraulic Fracturing Water

    The amount of water used in and produced by hydraulic fracturing of shale gas wells is in the millions of gallons per well.  Whether the water is going to be taken off-site for disposal or reused for re-injection, the flowback or produced water needs pretreatment to remove any residual oil from the water.  Waiting for remote laboratory results to determine the oil level can take several ...


    By Spectro Scientific

  • Portable IR Analyzers Provide Petroleum & Wastewater Industries with Accurate Oil Content Measurements

    Fixed filter infrared (IR) analyzers have been used to test oil levels in produced water on off-shore and on-shore drilling platforms for well over 45 years. U.S. EPA methods 418.1 and 413.2 were used extensively on a worldwide basis until the Montreal Protocol called for Freon (the solvent used in the analysis) to be phased out. Infrared analysis using tetrachloroethylene (perchloroethylene) is ...


    By Spectro Scientific

  • On-Site TPH in Soil Measurements in less than 15 Minutes with Portable IR Analyzers

    On-site analysis of total petroleum hydrocarbon (TPH) concentration levels in soil are easily handled using the InfraCal TOG/TPH Analyzers manufactured by Wilks Enterprise, Inc.  The InfraCal TOG/TPH Analyzers are portable infrared (IR) analyzers that quickly determine TPH levels in less than 10-15 minutes, including the extraction.  Concentrations as low as 10 ppm to well over 10,000 - ...


    By Spectro Scientific

  • Comply with Permit Levels for Fats, Oil and Grease in Wastewater using Portable IR Analyzers

    Wilks InfraCal TOG/TPH Analyzers provide accurate, on-site analysis to help regulators and industry reduce the discharge of fats, oil and grease in wastewater.  On-site testing with the portable mid-IR InfraCal Analyzer gives results in 10 minutes and eliminates the wait for off-site lab results.  It is simple enough for an operator with minimal training to do the analysis. Stricter ...


    By Spectro Scientific

  • Hydrogen Chloride Analyzer (HCl, H2O)

    LGR's Hydrogen Chloride Analyzer (HCl, H2O) provides sensitive measurements of HCl in ambient air or in industrial process flows (e.g., coal and cement exhaust streams) with extremely high precision and sensitivity. No longer do you have to spend a lot of money or wait a long time to measure HCl with extremely high sensitivity – LGR's HCl Analyzer provides measurements every second with ...

  • Field Detection of Chlorinated Alkenes in Well Water using the FROG-4000 Portable GC - Case Study

    Introduction Defiant’s FROG 4000, a portable GCPID system, was used to identify and determine the concentration of chlorinated alkenes in several extraction wells located in Tacoma Washington. Split samples were taken at each well and sent to an offsite lab for analysis. This case study examines the field exercise and highlights the high degree of agreement between the offsite lab and ...


    By Northern ANI Solutions Ltd.

  • Calibration stability of the sievers 900 series TOC analyzers

    Objective One of the advantages of the membrane conductivity measurement system employed in the Sievers 900 Series TOC Analyzers, compared to other TOC analyzers, is the excellent stability of the calibration. To illustrate this, a series of tests were conducted on three 900 Series analyzers over the course of a 14-month period and the results are  summarized in this report . The 900 ...


    By GE Analytical Instruments

  • Research Institute uses GE InnovOx TOC analyzer to evaluate hydraulic fracturing and oil exploration produced water

    Background The Global Petroleum Research Institute (GPRI) at Texas A&M University-College Station regularly conducts laboratory research studies on various oil and gas produced wastewaters with varying sample matrices. The GPRI tests samples at different shale and oil producing formations using a mobile laboratory, which houses a pilot-scale treatment system for identifying the ...


    By GE Analytical Instruments

  • Arsenic in Soil and CCA Treated Wood by Field Portable XRF

    Chromated copper arsenate (CCA) has been the most widely used wood preservative for decks, playgrounds and exterior housing structures. However, in recent years, issues surrounding the use of CCA preservative chemical have escalated, ...

  • Cerex introduces the new AirSentry FTIR Open Path Analyzer

    Cerex Monitoring Solutions is pleased to announce the release of the third generation model AirSentry FTIR multi-gas open path FTIR analyzer. The decision was made to fully redesign the analyzer to take full advantage of advances in hardware and software technology. The third generation design represents a full reconfiguration of the instrument. Goals were to reduce initial and operating costs ...

  • Oil in frac water testing

    The amount of water used in and produced by hydraulic fracturing of shale gas wells is in the millions of gallons per well. Whether the water is going to be taken off site for disposal or reused for re-injection, the flowback or produced water needs pretreatment to remove any residual oil from the wa-ter. Waiting for remote laboratory results can take several days to a week. The InfraCal TOG/TPH ...


    By Spectro Scientific

  • Comparing Field Portable X-Ray Fluorescence (XRF) To Laboratory Analysis Of Heavy Metals In Soil

    ABSTRACT Field portable x-ray fluorescence (XRF) continues to gain acceptance as a complement to traditional laboratory testing of metal contaminated soil. The quality of data produced by field XRF varies with site conditions, soil composition, and sample preparation. Quality assurance protocols for the field method usually require that a number of field samples be split and sent to a ...

  • Detecting Mercury in Water

    Determination of Mercury (Hg) in Water by Hand-Held, Portable Cold Vapor Atomic Fluorescence SpectrometryWater is the most familiar and most abundant compound on Earth, making up 71% of its surface area.[1]It is a vital component for all known forms of life and is the aquatic habitat for thousands of species of microalgae, fish and shellfish. [2] With the presence of running water in our ...


    By Arizona Instrument LLC

  • Faster, more accurate test results for water analysis

    The future is bright for a Guelph company whose innovative water-quality monitoring technology is helping industries and municipalities save millions of dollars while better protecting the environment. MANTECH manufactures water analysis systems that provide faster, more accurate test results while using environmentally-friendly methods. Incorporated in 2010, MANTECH has worked with Innovation ...


    By MANTECH

  • Emulsion-Breaking Techniques for Accurate Oil in Water Measurements

    A White Paper discusses emulsion-breaking techniques for ensuring accurate oil in water measurements. Certain water samples, such as those containing detergent, may form an emulsion when oil in water extraction into a solvent is done. In order to ensure an accurate measurement, the emulsion must be broken. Six techniques are described that can be used for reducing an emulsion ...


    By Spectro Scientific

  • Emulsion breakingtechniques for oil in water solvent extractions

    Certain types of samples, such as those containing detergent, may form emulsions when doing an oil in water extraction into a solvent. The boundary between the solvent and the sample will have an emulsion layer that lias a cloudy or milky appearance as shown in tlris photo. According to U.S. EPA Method 1664, "if the emulsion is greater than one-third the volume of the solvent layer. Hie ...


    By Spectro Scientific

  • Factors Affecting Oil in Water Testing Methods

    Various factors need to be considered when comparing methods to measure oil and grease in water.  Whether you are trying to meet effluent limits for an NPDES (National Pollutant Discharge Elimination System) permit, comply with oil and grease limits for the Clean Water Act (CWA), or an industry satisfying a POTW’s (Publically Owned Treatment Works) discharge permit, it is ...


    By Spectro Scientific

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you