positive displacement blower Articles

  • Is it really possible to improve superlatives? - Absolutely, with positive displacement blowers from AERZEN! The new generation Delta Blower G5plus is on the market!

    AERZEN set standards with the Delta Blower positive displacement blowers and raised the bar ever higher for performance, economic efficiency and environmental protection. To expand upon the success of the blower series, an exciting new design sets energy saving records. The innovative assembly concept combines proven features and newly-gained advantages. Delta Blower G5plus achieves up to 5% more ...

  • Choosing Aeration Blowers

    Introduction Infrastructure spending in the United States has not kept pace with the population growth and many wastewater treatment plants are at peak capacity. The nation's wastewater systems and their ratepayers face a major challenge in funding the expansion, replacement, and maintenance of aging infrastructure over the next several decades. For this reason, plant engineers and ...


    By Kaeser Kompressoren GmbH

  • Turbo Blowers made by AERZEN for Base Load, Delta Hybrids for Peak Load - Step by Step Towards the Ideal Sewage Plant

    Thanks to the reduced sewage duty resulting from basic changes to the aeration basins in 2008, modification costs of € 1.3 million were amortised after only three years. Replacement of the two existing turbo compressors with two new Aerzen rotary lobe compressors of series Delta Hybrid, led to an additional energy saving of approximately 13 % of process air generation. Since then, the entire ...

  • AERZEN provides energy efficient process air generation in the Kötz wastewater treatment plant

    The Kötz wastewater treatment plant, located a few kilometres south of Günzburg, was designed for a population equivalent of 45,000. About 20,000 inhabitants are connected at present. Due to the additional discharge of industrial wastewater, the average daily load corresponds to a population equivalent of about 35,000. The wastewater treatment plant works according to the ...

  • KLa Systems Offers “Retrofit Opportunities”

    KLa Systems is in a unique position to assist industries in meeting the challenges of production expansion and optimizing energy usage in their wastewater treatment facilities. Our Slot Injector system can easily retrofit all types of diffuser systems including conventional jet aeration systems within existing tanks and basins. Higher (15-60%) oxygen transfer rates can be achieved using the ...


    By KLa Systems, Inc.

  • Everything Depends on Pressure And Maintenance

    Energy and cost efficiency of biological treatment plants Every biologically working sewage plant needs a compressed air station for the oxygen supply of the aeration basin. This station only works at the highest possible energy efficiency level if excessive plant pressure through the subordinated system, excessive intake temperatures due to insufficient aeration and deaeration, and ...

  • The mills grind efficiently

    The – “Milser Mühle“ – has relied on AERZEN for 50 years When the Borgstedt Family took over the Milser Mühle 130 years ago, at first, it only produced feed material, and then, from 1918, it started to produce flour for human food. “Therefore we selected oilfree compressing AERZEN Positive Displacement Blowers of series GM as conveying air producer ...

  • Small lime works with big technology

    Recently, KöhlerKalk in Northern Hesse commissioned a new kiln. Thanks to the rotary lobe compressors made by AERZEN, the plant manufactured by QualiCal counts among the most efficient solutions in its field.  In Northern Hesse, they are calcining dolomite, a crystalline mineral mixture consisting of calcium carbonate and magnesium carbonate. This burnt lime is particularly suitable ...

  • AERZEN is helping a WWTP to reduce its energy usage

    Intelligent air supply for wastewater treatment plants The wastewater treatment plant at Rheda-Wiedenbrück is currently testing a brandnew control concept for AERZEN blower technology - the AERsmart control combination. Modernisation work at the wastewater plant began in 2013. The citizens of the Rheda-Wiedenbrück region, as well ...

  • We purify our waste­ water optimally

    Holzkirchen wastewater treatment plant achieves a new milestone in energy efficiency with AERsmart The Holzkirchen wastewater treatment plant has a clearly stated objective: “We purify our wastewater optimally.” For the municipal wastewater treatment plant, located 40 kilometres south of Munich, there is a requirement to operate in a way that is as resource-efficient as ...

  • From fresh water to waste water - AERZEN supplies oil-free oxygen to Nordland Papier

    The UPM Nordland Papier fine paper factory in Dörpen is the largest of its kind in Europe, producing up to 1.4 million tons of uncoated and coated paper every year with four machines. The company is part of UPM Paper ENA (Europe and North America), a worldwide leading manufacturer of graphic papers, with its head office in Germany and production facilities in Finland, the UK, France, Austria ...

  • In the aeration tank, the turbo provides ventilation

    Robust in operation: at Emsbüren, the AERZEN turbo saves quite a lot of energy At Emsbüren wastewater treatment plant, Wasserverband Lingener Land invested in new blower technology for the aeration tank. In comparison with the old assembly, the turbo blower made by AERZEN saves between 100 and 200 kilowatt hours every day. Modernisation of wastewater treatment plants in order to ...

  • Bespoke noise protection: AERZEN relies on the advantages of reactive silencers

    With reactive silencers, AERZEN reduces the noise emissions on the discharge side of its screw compressors, positive displacement blowers, and rotary lobe compressors. The innovative concept of these reactive silencers is superior to classic dissipative silencers in many respects. The sound waves developing on the discharge side of a Delta Screw compressor made by AERZEN can reach 170 to 190 dB. ...

  • KLa Slot injector™ Aeration system assists cheese & Whey production plant solve its Nitrogen discharge challenge - Case Study

    The Challenge A gourmet cheese, whey protein, and lactose production facility located in the Midwest had been utilizing a land application system for effluent discharge for over 40 years. Using a combination of ridge and furrow and spray irrigation, the plant had many years of success applying their wastewater to the land. However, as the gourmet cheese products gained in popularity along ...


    By KLa Systems, Inc.

  • A perfect pair: SBR designs & advanced aeration technology

    Conventional sequencing batch reactors (SBRs) that utilize diffused-air networks have existed in the U.S. for about three decades now. The reliability of controls and instrumentation has significantly improved in the last 10 to 15 years, and as a result, SBR plant designs are becoming more widely accepted. The attractiveness of their compact layout and ease of operation has also helped increase ...

  • Case study - SBR keeps noise, energy & capital costs low

    Pennsylvania is home to one of the first Argos® SBR plants to utilize a surface mounted process aerator/mixer, which is a significant improvement over the traditional diffused air network designs. The new layout offers substantial capital investment savings as well as significant reductions in ...

  • Sufficient air in the fixed bed reactor

    Delta Hybrid rotary lobe compressors made by AERZEN What about the typical sewage water smell? No chance! Visitors to the “station d’epuration” located in the district of Beggen have to pay close attention in order to realise that a wastewater treatment plant is in the neighbourhood - and one wich processes a daily water volume between 30,000 and 40,000 m3. In order ...

  • Chlorinated solvents: methylene chloride and TCE

    Introduction This paper presents the results of a scaled and phased approach to source remediation of high concentrations of recalcitrant chlorinated solvent compounds via soil vapor extraction (SVE) and vapor treatment at a Site in Southern California. Phase I began with refrigerated condensation (C3) in order to achieve high mass removal rates to reduce lifecycle costs and time ...


    By GEO Inc

  • High temperature pneumatic conveyance solution - Case Study

    Overview A North American catalyst supplier was experiencing excess leakage from the dual 18" rotary airlock valve series in their dilute phase pneumatic conveyance system supporting a high temperature alumina application. The Problem The client's high temperature industrial process was frequently disrupted by excess wear to the adjustable shoe on the end of ...


    By Wm. W. Meyer & Sons, Inc.

  • Treatment Options for Molten Sulfur Storage

    Documento sin título ...


    By Merichem Company

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you