power cable monitoring Articles

  • Sewer Level Monitoring - Photos

    Sewer Level Monitoring - Photos Photos in this article present the complexity and versatility of sewer level monitoring. When examining the photos, pay special attention to the stand-alone autonomous characteristics of each installation. In lack of any cabling from the outside, whether data cables or power cables, the solution is fed from its own battery power supply. Data is tranmitted ...

  • Powering up your business

    Dramatic incidents such as explosions, fires, floods and landslides make the headlines, but mundane mishaps such as diggers cutting through cables can cause just as many problems for businesses.  With many companies now putting all their eggs in one electronic basket, power supply is a critical factor in business life with the fear of electricity blackouts identified as a major problem for ...


    By Shenton Group

  • Fuel Cell Voltage Monitoring Considerations

    Knowing what’s happening inside a fuel cell is a critical function, especially as fuel cells are continuing to be developed. One important aspect of this is to measure the voltageof each cell in a stack. Although this may sound trivial, it can be more complex and more expensive than it may at first appear due to high voltages, high channel counts,communication types, etc. There ...


    By Fuel Cells Etc

  • Wireless monitoring for a safe indoor environment

    This article discusses the benefits of wireless technology for continously monitoring the indoor environment. In striving for the construction of energy efficient and cost-effective buildings, the imperative issue of the buildings Indoor Air Quality (IAQ) is often overlooked. This can often lead to a unhealthy indoor environment and even to conditions such as Sick Building Syndrome (SBS) or other ...


    By PPM Technology

  • Ocean Power connects wave energy system to grid

    Ocean Power Technologies, Inc. (Pennington, NJ) announced that it has achieved what it claims to be the first-ever connection of a wave-energy system to the power grid in the United States. Ocean Power’s PB40 Powerbuoy system is now delivering power to the grid at the U.S. Marine Corps Base Hawaii on the island of Oahu. The Powerbuoy unit, which was installed in December 2009 at a ...

  • Monitoring the holy ground of FC Basel - Case Study

    The grass on athletic grounds, particularly in large stadiums, is not only an important concern for sports but also one of the largest cost drivers. Therefore, the monitoring and care of the grounds takes on special significance. PlantCare has installed a soil moisture monitoring system as part of the redesign of the entire playing field at St. Jakob-Park stadium in Basel. The system measures ...


    By Eijkelkamp Soil & Water

  • Off Shore Oil Sheen Detection and Thickness Monitoring

    This technical note discusses some of the key offshore applications for oil-on-water monitoring and thickness detection. Leakwise systems have over 18 years of experience supplying reliable monitoring to major petroleum and power companies in offshore and onshore applications. Designed for Marine Applications The Leakwise ID-227 wired and ID-227WL wireless systems ...


    By GE Analytical Instruments

  • Sewer Level Monitoring System - a case study

    Background - The business of sewage level monitoring in sewers is accelerating across many countries. Strict regulations, the need to avoid environmental disasters, violation fines, early warnings and planning needs are just some of the forces shaping this growing trend.   Challenges Quantifying sewage flow and level is one of the most ...

  • GE Leakwise Application Notes: Oil Detection for Power Distribution Stations

    Transformer Substations Utilities have hundreds of transformer substations. In each substation there are usually several transformers.  Each transformer contains a high volume of insulation oil. A catch basin is built under ...


    By GE Analytical Instruments

  • How A Wireless Mesh Makes Tank Level Monitoring Easy

    Want to avoid wires? Want to lower the cost of installing sensors? If so, a wireless mesh is a good way to go. It’s a great solution for both remote and local tank level monitoring, and it’s an industrial grade, reliable, and proven technology. What is a wireless mesh? A wireless mesh network is a series of radios that talk to each other. It’s a point to ...

  • Case study - New N2O monitor for occupational health and safety

    The new Geotech G200 range of N2O analysers measures N2O at 0-1000ppm or at 0-100 percent with accuracy, speed and ease-of-use.  With options for CO2, O2 and CO, the G200 range can assist anaesthetists and ...


    By Geotech

  • Monitoring and Recording Soil Moisture Using Wireless Data Collection

    Wireless Voltage Data Logger Records in Real-Time CAS DataLoggers recently provided the low cost wireless solution for a government organization undertaking an environmental project for recording and remotely monitoring the moisture content of peat moss soil. The data would be used in support of developing climate prediction ...


    By CAS DATALOGGERS

  • Demolition Noise Monitoring with John F Hunt - Case Study

    Cirrus Environmental has enjoyed a long alliance with John F Hunt Demolition going back over many years, so much so, the company’s Health, Safety & Environmental Department has accumulated almost an historic arsenal of Cirrus equipment that charts the journey of noise monitoring over the years. About John F Hunt Demolition The ...


    By Cirrus Environmental

  • CR:245 Portable Noise Monitor – Motor Racing Noise Application case study

    The CR:245 series consists of self contained Portable Environmental Noise Monitors, ideal for short and medium term measurements for applications such as industrial, airport, transport and construction. Both periodic environmental groups and recognised noise events are stored, along with a 7 Day Noise Profile (time history). Operation is very straightforward simply press the start button to ...


    By Cirrus Environmental

  • Performance monitoring & troubleshooting with a new individual condenser tube circulating water flow and fouling (ClA/FF) meter - case study

    Introduction Midwest Generation Joliet Station in Illinois has two coal-fired units, Unit 7 and Unit 8. Roth 550 MW units are located on the Des Plaines River and have been in operation since 1963-1964. The circulating water system is a once-through system comprised of a bar rack, traveling screens, circulating water pumps and reversible condensers. The original condenser tubes on Unit ...


    By Intek, Inc.

  • Port of London Authority Tidal Monitoring System - POLATIDE 5: Detailed - Case Study

    Introduction: Valeport and OceanWise have designed and delivered a complete tidal monitoring system, including tide gauges, telemetry equipment, servers, databases, system control, data management and display software, to the Port of London Authority. The system was installed in October 2013 and rigorous testing completed in February 2014.  Background: ...


    By Valeport Ltd

  • Assessment of detection limits of fiber-optic distributed temperature sensing for detection of illicit connections

    Distributed temperature sensing (DTS) with fiber-optic cables is a powerful tool to detect illicit connections in storm sewer systems. High-frequency temperature measurements along the in-sewer cable create a detailed representation of temperature anomalies due to illicit discharges. The detection limits of the monitoring equipment itself are well-known, but there is little information available ...


    By IWA Publishing

  • Gill MetPak II weather station used to protect maltese prehistoric temples case study

    Weather data provided by the Gill MetPak II Weather Station increases understanding of the affects of weather and climate on stone structures. The Gill MetPak II Weather Station is being used as part of a comprehensive air monitoring system at a prehistoric temple site for the Maltese Department of ...


    By Gill Instruments Limited

  • Levelogger Edge Data Verified in Harsh Conditions of Antarctic Tidal Study

    From April 2013, through December 2013, a Levelogger Edge was used in an Antarctic Tidal Study to monitor sea level fluctuations in the Davis Sea, Antarctica. A unique monitoring setup was implemented for the successful installation of the Levelogger Edge in these extreme climatic ...


    By Solinst Canada Ltd.

  • Should Your Sensor Have A Connector Or Pin Terminals?

    When it comes to measuring the activity of your project, it’s nice to have options. High precision sensors can offer plenty of selections from the range of your measurements to the output of your readings, but a sensor is only as good at its connection. Connectors and pin terminals are common and dependable connections that relay your readings from within the sensor to the screen in front ...


    By Jewell Instruments LLC

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you