power generation air emissions control Articles

  • Put energy into emission control projects

    Many companies feel pressured to spend the least amount possible to meet environmental regulations, primarily because compliance isn’t a profit generating endeavor. What some environmental and compliance managers fail to realize is that emission control equipment can quickly become a profit decreasing endeavor with this penny wise-pound foolish approach. With mandatory greenhouse gas (GHG) ...

  • An Introduction to the Topic: Controlling Mercury Emissions from Coal-Fired Power Plants

    Untitled Document Mercury is a hazardous air pollutant (HAP) that circulates around the globe for a year before depositing back to ...

  • Permit Compliance Monitoring for the Power Generation Industry

    The Clean Air Act Amendments (CAAA) of 1990 authorized EPA to develop regulations requiring facilities to monitor the adequacy of emission control equipment and plant operations. This paper discusses the various methods available for coal-fired power plants and gas turbine installations to demonstrate a reasonable assurance of facility compliance with emission limitations, and ensure that control ...

  • Emissions analyser helps manage power station

    A multiparameter emissions monitor at Thetford power station is being used to demonstrate to the Environment Agency that the plant is performing within the conditions of its environmental permit. However, the data from the analyser, which was supplied by Milton Keynes based Quantitech, also performs a vitally important role in helping to manage the plant. “Individual gas readings are ...


    By Quantitech Ltd

  • Wet electrostatic precipitators: A preferred technology for emission control

    The basic science behind electrostatic precipitators is as familiar and as simple as static cling. But today, this elemental force has been harnessed to a technology that is helping to remove millions of tons of toxic chemicals from our atmosphere; saving billions of dollars annually in pollution-related physical damage; and averting costly impacts on health and mortality rates for millions of ...


    By Beltran Technologies, Inc.

  • Controlling Air Pollutants case study

    While it's not always easy to determine what's required for compliance, new technologies can help achieve air-pollution control Selecting air-pollution control equipment can be tricky. It's not only difficult to determine which pollutants must be controlled, but also which type of equipment will best control them to required levels for any given process or facility because there is no ...


    By Bionomic Industries Inc.

  • Meeting emission control through improved actuation

    Introduction Reducing fugitive emissions, particularly methane, is a major priority in the fight against climate change. Although valves and actuators have been the focus for reduction efforts because valve leakage accounts for more than half of total fugitive emissions, the problem is mainly old valves that weren't designed using the latest materials and technologies. New technologies can ...


    By Rotork

  • A mixed-integer non-linear programming model for CO2 emission reduction in the power generation sector

    Electricity generation is considered to be one of the main contributing sources to the air pollution problem. It is, therefore, important to develop and implement effective control strategies to prevent the expected abrupt increase in emissions from this sector. Any control strategy must be suitable for local implementation and must also be economically viable. The main objective of this paper is ...


    By Inderscience Publishers

  • Costs and health benefits of reducing emissions from power stations in Europe

    Current levels of emissions of sulphur dioxide (SO2) and nitrogen oxides (NOx) from power plants generate very significant health and environmental damage across Europe. This study demonstrates that by applying up-to-date emission control technologies, these emissions could come down drastically. By estimating the costs and health benefits of further emission reductions, this study highlights the ...

  • FTIR emissions analyser helps manage UK power station

    A Gasmet FTIR multiparameter emissions monitor at Thetford power station is being used to demonstrate that the plant is performing within the conditions of its environmental permit. However, the data from the analyser, which was supplied by Gasmet’s UK distributor Quantitech, also performs a vitally important role in helping to manage the plant. “Individual gas readings are displayed ...


    By Quantitech Ltd

  • Case study - Carbon fibre: furnace & oven emission control

    Overview A carbon fiber company in China was faced with the challenge of selecting an emission control system for a new pilot line at their specialty fiber products facility. The line would include furnaces and three ovens, both of which would emit Carbon Monoxide (CO), Ammonia (NH3) and lethal amounts of Hydrogen Cyanide (HCN).   Action ...

  • Air Pollution Control: Ready for the 21st Century

    The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well into the 21st century. The nature of the problem The major air pollution problem in the textile industry occurs during the finishing stages, ...


  • FTIR Emissions Analyser helps manage UK Power Station

    A Gasmet FTIR multiparameter emissions monitor at Thetford power station is being used to demonstrate that the plant is performing within the conditions of its environmental permit. However, the data from the analyser, which was supplied by Gasmet’s UK distributor Quantitech, also performs a vitally important role in helping to manage the plant. “Individual gas readings are displayed ...


    By Gasmet Technologies Oy

  • EMEP/EEA air pollutant emission inventory guidebook 2016

    1 Guidebook Introduction 1.1 Introduction The joint EMEP (1)/EEA Air Pollutant Emission Inventory Guidebook (the 'Guidebook'), following the 'Guidelines for Reporting Emissions and Projections Data' under the United Nations Economic Commission for Europe (UNECE) Convention on Long-range Transboundary Air Pollution (LRTAP) (2), provides concise guidance on how ...

  • Emissions Trading, the economy and the environment

    John Kinsman reviews the successes of emissions trading and rebuts fears that trading might lead to localised ‘hot spots’ The US Acid Rain Program, established in 1990 to reduce sulphur dioxide (SO2) and nitrogen oxides (NOx) from electric power plants across the ...

  • Continous Emission Monitoring (CEMs)

    Presented in Track B1: CEMs at EUEC 2011,January 31 Phoenix, Arizona   B1.1  | Particulate CEM for wet FGD plant William Averdieck |  Managing ...

  • Reduced Emissions for Landfill Gas Installations

    The use of landfill gas as a source of renewable energy is increasing. For environmental and safety reasons, the owners of the waste storage sites have to strictly monitor and control the construction, operations, and emissions generated. Sulzer offers solutions to control these emissions within the limits given by the government. Landfill gas is similar to natural gas, but it is created by ...


    By Sulzer Management Ltd

  • Process-generated contaminants

    Overview: There is not currently a formal and universally recognised definition of a process-generated substance. Process-generated contaminants can be generated as emissions from combustion processes, abrasion and/or other processes that physically or chemically degrade or otherwise modify the starting material(s), e.g. degradation/composting of organic materials. Such ...

  • NOx in Non-Utility Industries - Part I NOx in Non-Utility Industries - Part I - Air emission origins, best control solutions and monitoring methodology for nitrogen oxides

     Problems with reducing nitrogen oxides (NOx) are widespread in the general process industries. These industries, together with medium size utility and power generators contribute about 15 percent of global NOx emissions. The emission sources addressed include various heaters employed in chemical and petrochemical plants, nitric and sulfuric acid plants, glass furnaces, iron and steel mills, ...


  • Strategy for Complying with Air Pollution Control Regulations in the Chemical Industry

    Untitled Document The Clean Air Act (CAA) was originally passed by the United States Congress in 1970 and subsequently revised in 1977 for the purpose of protecting human health ...


    By Trinity Consultants

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you