power generation project Articles

  • Heat Recovery Steam Generators (HRSG) & Blowdown Pump Stations

    Romtec Utilities engineers and supplies pump stations for many different applications for industrial facilities across the country. These facilities range from chemical manufacturing to oil & gas refineries, and power generation is another industrial market where Romtec Utilities excels. We have supplied many different types of pumping systems for power gen facilities for wastewater, ...


    By Romtec Utilities Inc.

  • Innovation and efficiency at the forefront of long-standing partnership

    Wiltshire-based Malaby Biogas operates one of the few independent anaerobic digestion (AD) plants in the UK, specialising in the diversion of food waste from landfill. Its Bore Hill Farm Biodigester provides a combined waste disposal and energy generation solution in one safe, clean and highly-efficient process and the facility has gained a wide-ranging ...


    By Geotech

  • Minimum Total Harmonic Distortion on board Scandlines New Hybrid Ferries Berlin & Copenhagen - Case Study

    In 2016, Scandlines inaugurated two new hybrid ferries for the Rostock-Gedser route. In order to improve the power quality, Scandlines installed active filters on board M/V Berlin and M/V Copenhagen. Before commissioning, Scandlines’ new hybrid ferries had a power quality of THDV 15%. In order for the ferries to go into operation, the power quality had to be reduced to below 8 ...


    By DESMI A/S

  • Renewable Power Generation Costs in 2014

    Executive Summary The competiveness of renewable power generation technologies continued improving in 2013 and 2014. The cost-competitiveness of renewable power generation technologies has reached historic levels. Biomass for power, hydropower, geothermal and onshore wind can all now provide electricity competitively compared to fossil fuel-fired power generation (Figure ES 1). ...

  • Power generation at a stationary engine application

    South Texas, USA Max Gross Power Output: 28kWe Thermal Heat Input: 235 - 450kWt Hot Water Input Range: 180 - 190°F Hot Water Flow: 200 GPM Direct Condenser: Ambient air temperature ranges from 30-100°F avg is 70°F ElectraTherm’s Gulf Coast distributor, Gulf Coast Green Energy (GCGE), is generating fuel-free, emission free power using the ElectraTherm ...


    By ElectraTherm

  • Enron's Dabhol power project in India

    In the early nineties, Enron USA went to India to set up a $3 billion power plant at the express invitation of the then Indian government. The process and incidents associated with the setting up of the Dabhol Power Company are highly relevant, even in current times, for companies who intend to set up operations in India. The case is a good example of the strategic importance of ethical corporate ...


    By Inderscience Publishers

  • Projected Costs of Generating Electricity - 2015 Edition

    This joint report by the International Energy Agency (IEA) and the Nuclear Energy Agency (NEA) is the eighth in a series of studies on electricity generating costs. As policy makers work to ensure that the power supply is reliable, secure and affordable, while making it increasingly clean and sustainable in the context of the debate on climate change, it is becoming more crucial that they ...


    By International Energy Agency

  • Harquahala Generating Project, LLC - Tonopah, AZ

    The Harquahala Generating Project serves as a power and electrical wholesaler in the southwestern United States. To fill the need for growing energy consumption in the region, this facility was built to provide power to the area. Project DescriptionThe Harquahala Generating Project is a 1000 MW combined cycle power facility located in Maricopa County, Arizona. Commissioned in 2003, ...

  • Flexible Biomass Gasification Technology for Distributed Power Generation

    The ultimate aim of this research and development project is to demonstrate the key technological aspects of the proposed biomass gasification technology for distributed power generation, in order to speed up the commercial update of biomass as a reliable and cheap renewable energy source across Partner countries. Australia will lead this project with the collaboration of Japan, China, India, and ...

  • Design and Development of a Renewable Cooling and Power Generation Systems

    The key objective of this project is to address the unfulfilled demand for power and cooling in remote, rural, and un-electrified areas and to enhance overall socio-economic conditions through delivery of electricity and improved cold storage facilities using renewable energy. This project seeks to design, develop, and fabricate a number of prototypes with integrated renewable heating and cooling ...

  • Case study: AMAPETCO onshore gas power generation

    ProServe with its principles Dresser Rand has supplied, installed, commissioned and start up on Nov 2015 a very unique 2 X 780 kW gas gen sets using the flare gas at AMAPETCO company field in Ras Eldeb bay “100 Km south of Hurghada city on the red sea. These two gen sets are the first environmental friendly ones in Egypt using a catalytic convertor to reduce the NOx to less than 100 ppm. ...


    By ProServe Egypt

  • 30MW Queensland LNG Power Project - Case Study

    Clarke Energy has signed a deal with Australia Pacific LNG to provide a 30MW temporary power plant to their coal seam gas processing plant in Queensland. Clarke Energy to provide 30 MW temporary power station to support operation of Reedy Creek coal seam gas processing facilities ...


    By Clarke Energy

  • Introducing externalities in the power-generation sector of China

    This paper presents results from the application of the China Regional Energy Trade Model (CRETM, developed at PSI) to analyse the impact of externalities in the power-generation sector of China. The model applies state-of-the-art optimisation methods and incorporates partial equilibrium, endogenous technological change and external costs related to regional pollution and the climate change. This ...


    By Inderscience Publishers

  • GTI’s Cover Crucial Part of Slave Lake Pulp’s Biomethanation and Power Generation Project

    The Customer: Slave Lake Pulp, a subsidiary of West Fraser Mills Ltd., is a 240,000-tonne-per-year Bleached-Chemi-Thermo-Mechanical Pulp (BCTMP) mill located in northern Alberta, Canada. The mill primarily processes aspen to produce market pulp for the global market. The Customer’s Needs: Slave Lake Pulp was treating its high-strength wastewater in a ...

  • Case study - Agiba Gas Power Generation

    Proserve has recently carried out a power generation project with Agiba Petroleum Company in the western desert of Egypt to utilize the waste free flare gas instead of the very expensive fossil diesel fuel to power the oil production wells ‘pumps. The project faced several technical challenges. The associated gas has a low methane number” less than 45”,  which necessitated ...


    By ProServe Egypt

  • Sustainability Projects

    I2.1 | Energy Management: Barriers to Implementation Michael Walker | VP – Energy & Environmental Services, The EI Group, Inc. There is a lot of talk about saving energy and improving sustainability. While everyone agrees that “we” should do more, many owners and property managers have concluded that their ...

  • Environmental assessment process for the AES Parana power plant development project in Argentina

    The paper describes the electric utility generation project that was constructed at the site of the existing Central Termica San Nicolas (CTSN) power plant in San Nicolas, Argentina about 240 km northwest of Buenos Aires and the projects environmental impact. This project is part of the Argentina Electric Sector (AES) and an important peak power contributor to the regional electric power grid. ...


    By Inderscience Publishers

  • Generating Ecological Gains from Hydro-Electric Power - Case Study

    NCC has worked with Eskom to mitigate the environmental impacts of the Ingula Pumped Storage Scheme on a sensitive wetland site in the Little Drakensberg/Escarpment, including creating and managing a new conservation area. South Africa’s energy demand is growing at rates of around 5% a year, placing enormous pressure on Eskom not only to create new generating capacity, but also to manage ...

  • Perimeter Fence Lighting Power Generating Station Gains Security with Solar

    Project Summary End User: Power Generating Station in Southwest US Lighting Agent: R.C. Lurie Company (Lighting Design) Project Scope: Independently powered (solar) lighting systems for perimeter fencing surrounding a power generating station located in the Southwest US Product: ...

  • Boiler feed water -power generation facility application case studies

    Challenge A large power generation client required a treatment solution to meet the parameters required for their boiler feed operations. The inlet feed water contained several contaminants including hardness minerals such as calcium/magnesium, dissolved salts, trace hydrocarbon and certain heavy metals including ferric iron. Solution ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you