pre-engineered chemical storage building Articles

  • Chemical storage buildings isolate hazardous liquids and minimize damage from spills

    The improper storage of corrosives and flammable liquids is the leading cause of spills that can result in damage to facilities and impact worker safety. One of the most effective practices to help minimize damage from chemical spills is to isolate the various chemical hazards. Since knowledge of chemical compatibility is critical, it is important to understand that there are two major types of ...


    By Interstate Products Inc

  • Chemical Engineering Magazine Article: Chemical Lifecycle Management

    Chemicals in production and laboratory environments alike have three distinct lifecycle phases: the first is procurement and inventory storage; the second is use in a manufacturing process or research program; and the third is post-use, including onsite handling, removal and beneficial reuse, recycle or disposal. A number of considerations including regulations, safety, material utilization ...


    By Clean Harbors

  • Carbon Capture & Storage: CO2 Capture

    F7.1  | DOE and NETL’s Carbon Capture R&D Program Timothy Fout |  Project Manager, US DOE/ NETL With pending legislation or EPA action on greenhouse gas emissions, ...

  • Looking Beyond Chemical Water Treatment Case Study

    When you think of an environmentally friendly company, a steel processing plant does not typically come to mind. However, Stripco Inc. of Mishawaka, IN, a manufacturer of production-ready, cold-rolled steel coils, is the exception. In August of 1995, Stripco made a wise decision that also proved to be cost-effective and environmentally- friendly when they installed a Superior Environmentalist ...

  • Waste Incineration Upgrades at the Eastman Chemical Company

    INTRODUCTION Eastman Chemical Company, headquartered n Kingsport, TN, is an international supplier of organc chemicals, fibers anci plastics with annual sales of approximately $46 biNion and approximately 5300 customers worldwide. Tennessee Eastman Division, also located in Kingsport, is the company’s largest manufacturing fadllity The nine hundred acre site contains manutacturing facilities as ...


  • Prepare Your Sprayer for Storage Now to Avoid Costly Problems in Spring

    Growers — extra care for your sprayer now can save time and money later. So says Erdal Ozkan, an engineer and spray technology expert with the College of Food, Agricultural, and Environmental Sciences at The Ohio State University. Ozkan, who is an agricultural engineering professor who also has appointments with Ohio State University Extension and the Ohio Agricultural ...


    By Ohio State University

  • Demonstration of DeconGel at Oak Ridge National Laboratory building 2026

    Challenge In 2003 an area behind the hot cells in Building 2026 at the Oak Ridge National Laboratory (ORNL) was flooded with highly contaminated liquids when a liquid low level waste pipe became clogged. The main contaminants of concern are uranium and plutonium. Transferrable contamination levels are in the 1,000,000 disintegrations per minute range. The area is posted as an airborne ...


    By KT Chemicals, Inc.

  • "A Non-Chemical Water Treatment for Cooling Towers"

    Untitled Document Introduction This paper will describe a case study of a ...


    By Dolphin WaterCare

  • Mossy Rock, Washington - in-situ chemical oxidation case study

    Leaking underground storage tanks at the Police Station / City Hall in Mossyrock, Washington contaminated soil and groundwater with gasoline hydrocarbons. A portion of the soil was excavated, but the presence of the building prevented all of the contamination from being removed. After first advancing a series of soil borings to accurately define the target zone, Cedar Creek Engineering installed ...

  • Best Practices for Chemical Management for Cost Savings, Regulatory Compliance, and Environmental Responsibility

    If you ask industrial and laboratory operations managers about their biggest challenges, the answers you'll hear most often relate to environmental regulations and the management of chemicals. And the concern permeates the whole organization as well -- according to Accenture and the Conference Board, over one third of 500 top US CEO's named chemical-related Environmental Health ...


    By Chemical Safety Software

  • Landfilling of Pre-treated Waste - Consequences for the Construction, Operation and After-care of Landfills

    INTRODUCTION From the realisation of the German Waste Storage Ordinance (Ordinance on Environmentally Compatible Storage of Waste from Human Settlements AbfAblV, ANONYM, 2001) follows that in Germany from June 2005 on only pre-treated wastes are allowed to be furnished to landfills. In some parts pre-treatment will fundamentally change the physical, biological and chemical properties of the ...


    By ORBIT e.V.

  • Viscotaq earns ‘nine out of 10’ rating from chemical plant - Case Study

    InduMar Products Inc. has been providing leak repair solutions for 25 years to all markets where pipe leaks are a problem. The company’s VISCOTAQ product line has been developed in cooperation with leading companies in the oil and gas industry and polymer engineering companies to meet the demand for coating technology with unique and better properties for corrosion control. The result is a ...


    By InduMar Products, Inc.

  • Material Matters - An Engineering and Fabrication Challenge

    The world of engineering is a very large and diverse universe which ranges from electrial, mechanical and civil to environmentaland structural. It is true that their varied disciplines have many qualities in common, e.g. the mixture of logic, creativity, awareness of cost /benefit ratio etc., are requirements of all engineering. It is equally true that each discipline has its own mind set, ...


    By Fabricated Plastics Limited

  • Mishandling of Hazardous Materials & Contaminants, Asbestos, Lead, Mould & Fungus, PCB`S

    Untitled Document Everyday in Canada and the United States Hazardous Materials are being removed improperly contaminating the buildings we occupy. The hazardous materials including ...

  • Case study - Superfund site, water pump & treat system

    Anguil Aqua Systems LLC was contracted as part of a team of companies to implement a ground water pump and treat system intended to remove trichloroethylene (TCE) from a local aquifer designated as a Superfund Site by the Environmental Protection Agency (EPA). Though the site is nestled between the buildings and roadways of an existing and operating industrial facility, the overall extent of the ...

  • Retro-Fit - Conversion of a Failed Media Filter to a Suspended Growth Aeration System case study

    This particular project involved the conversion of a failed media filter to a suspended growth aeration system. The project was managed by Mr. Hal Lewis, P. Eng. of Stantec Consulting Limited. Sani Tech Communal Systems was awarded the contract to design and construct the repair. Sani Tech retained the services of Mr. Robin Smith, P. Eng., of Robin Smith Engineering to provide the process design ...


  • Georgia pacific improves energy and operating efficiences with a Culligan solution

    Challenge Water is a valuable commodity in any manufacturing process. Manufacturing companies depend on clean, quality water throughout their entire business, such as for boiler feed water make-up, recycling back to cooling towers, improved process run times and overall quality and consistency of production. With the need for steam in their daily operation, Georgia-Pacific was ...


    By Culligan Water

  • Wyman Gordon Case Study

    Wyman-Gordon is a world class materials company with nearly 200 years of metals engineering experience. They are the acknowledged leader in the production of high-quality closed-die forgings and extrusions for the most critical applications. Markets served include those for commercial and military aircraft; gas turbine engines; oil and gas exploration; land based gas turbine and power generation; ...


    By Mech-Chem Associates, Inc.

  • A Cost-Effective Approach to Explosion Consequence Modeling

    Failure to identify and mitigate explosion hazards is a persistent cause of industrial accidents, impacting sites ranging from fertilizer storage facilities to refineries. While some explosion consequence assessments are performed to comply with regulatory requirements or industry-specific process safety standards, in many cases the potential for loss of life and property damage is overlooked ...

  • DHL logistics campus ground water protection case study

    When the massive logistics campus in Unna begins operations in the near future, it will change the face of the region. Approx. 350 people will be working in the massive 90,000 square meter hall helping two million pallets annually get to their proper destination. The facility requires proper safeguards especially with regards to chemical materials. The leading international logistics company DHL ...


    By NAUE GmbH & Co.KG

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you