pre-fabricated water tank Articles

  • Water Tanks

    If you need to transport large amounts of water for your business, no matter what your business may be, you’re going to need a water tanker – and there’s no better place to get just what you need than here at Amthor International. Here at Amthor International, we provide a wide variety of options so that you can customize your water tanker to fit your specific needs. ...


    By Amthor International

  • Importance of the Pre-charge of Pressure Tanks.

    A pressure tank consists of an air and water chamber that are divided by a membrane. The air in the air chamber is compressed dry air. This so called pre-charge is a very important factor in the operation of a system with a pressure tank. It acts like a spring and stores the energy in a tank that is used to supply pressurized water when the pump is not running. The membrane that separates the air ...

  • Kijlstra pre-cast tank helps housebuilder go with the flow

    Pre-cast units from specialist manufacturer Kijlstra has helped to speed up the installation of a large concrete attenuation tank at a new housing development in Scotland. Groundworks contractor Mulholland Contracts installed the 31 m long, 8.65 m wide and 0.88 m deep underground tank in just four days, allowing other construction works to get started and minimising delay. The attenuation tank is ...


    By Kijlstra LTD.

  • Septic Tank Conversion for septic tank Treatment

    Your septic system is a mixture of a motorized and organic system. Septic pumping check is a reasonably priced process when measured up to with replacing your septic system. Septic pumping service is indispensable to keep your tank, drainpipes, and sewer in good functioning order. A concrete made septic tank can also accomplish the passage point and flood into the leakage bed, where they bung ...


    By Hydra International Ltd

  • “Tank in a Box” is a good neighbor

    As most water districts and municipalities have experienced, every new construction project generates some opposition from people living in proximity to the project. In a recent project located in Westlake Village, CA, some residents have been openly very critical of the 5,000,000 gallon concrete water storage tank under construction. One local resident stated he counted 58 concrete trucks ...


    By Superior Tank Co., Inc.

  • Five Critical Parts For Your Steel Storage Tank

    Every year, we sell hundreds of parts for bolted tanks and welded steel tanks. Even though many ground storage tanks needing parts were not originally manufactured by Superior Tank Co., Inc., we can provide standard replacement components for steel storage tanks or can fabricate custom parts and accessories to ...


    By Superior Tank Co., Inc.

  • Material Matters - An Engineering and Fabrication Challenge

    The world of engineering is a very large and diverse universe which ranges from electrial, mechanical and civil to environmentaland structural. It is true that their varied disciplines have many qualities in common, e.g. the mixture of logic, creativity, awareness of cost /benefit ratio etc., are requirements of all engineering. It is equally true that each discipline has its own mind set, ...


    By Fabricated Plastics Limited

  • Sludge accumulation and conversion to methane in a septic tank treating domestic wastewater or black water

    Although the septic tank is the most applied on-site system for wastewater pre-treatment, limited research has been performed to determine sludge accumulation and biogas production in the tank. Therefore a dynamic mathematical model based on the Anaerobic Digestion Model No. 1 (ADM1) was developed for anaerobic digestion of the accumulated sludge in a septic tank treating domestic wastewater or ...


    By IWA Publishing

  • Highland Tank 50,000 Gallon Oil/Water Separator installed at Con Ed Mott Haven Power Distribution Center

    Before the Brooklyn Bridge spanned the East River, before the Statue of Liberty first graced New York Harbor, and before skyscrapers rose above New York City's streets, the utility companies that would eventually become Con Edison were already building the energy infrastructure needed to fuel and sustain the city's growth. Today, Con Edison operates one of the largest and most complex — yet ...

  • Upgrading Pre-Existing DAF Clarifiers

    Whether a Mill is pursuing a facility wide directive to reduce water consumption or simply looking for better performance from a presently installed DAF clarifier, the advancements discussed in this overview offer proven techniques to optimize existing DAF system operations. Significant operational cost reductions can be achieved with DAF System Upgrades. In addition, increasing DAF performance ...


    By World Water Works, Inc.

  • Wastewater Pre-Treatment for the food industry (vinegar and dressings)

    Description of the plant Highly polluted wastewater arises from the production of high-quality vinegar, delicatessen and mustard products. Most of the COD load here is formed by lipophil substances which have to be decreased before to municipal sewer net. Peaks of load and flow are buffered in a mixing and balancing reactor to achieve an homogenised flow to the ...

  • WasteWastewater pre-treatment in a milk-processing company

    Description of the plant The wastewater from the production is buffered in a pump sump which is designed to buffer peaks of flow and load. The pump sump also works as a fat trap. From this stage, the water is lifted to the biological reactor where organic substances which are mainly milk sugar and other organic compounds are decreased by microbiological actifity. The ...

  • Diamondhead, MS - 500,000 Gallon Torus Bottom Elevated Tank

    The Village of Diamondhead, MS was very fortunate to have received a high quality paint job when their tank was first constructed in 1976. In 2009 when Caldwell was selected to perform the work on this project, the original paint system was still in place on the exterior of the tank, with only overcoats having been applied on top of it. However, the years had taken their toll and the lead primer ...


    By Caldwell Tanks, Inc.

  • Phosphate Pre-Treatment of Steel: Always Powder Coating

     Always Powder Coating have replaced the conventional iron phosphate pre-treatment system with an organic process that operates at room temperature. The savings from reduced energy, labour and waste disposal costs amount to $60,000 per annum. Background Always Powder Coating (APC) operates a powder coating facility in Melbourne's eastern suburbs and specialises in ...


  • Challenging Engineering Design and Ultra Pure Fabrication for the Semi-Conductor Industry

    Challenging Engineering Design and Ultra Pure Fabrication for the Semi-Conductor Industry The semi-conductor industry is one of the most demanding in terms of its requirements from suppliers. Only a few companies worldwide have the expertise, the facilities, the knowledge and the experience to be considered when new plant equipment is put out for bidding. Similar to the pharmaceutical and food ...


    By Fabricated Plastics Limited

  • Comparison of optional process configurations and operating conditions for ceramic membrane MF coupled with coagulation/flocculation pre-treatment for the removal of NOM in drinking water production

    The increase of Natural Organic Matter (NOM) in natural water sources, partly caused by progressing climate change issues, is a growing concern for drinking water production. In recent years, membrane technology like Reverse Osmosis (RO) or Nanofiltration (NF) has been successfully applied as a robust solution for NOM removal to produce potable water. However, coagulation/flocculation ...


    By IWA Publishing

  • Saudi Arabia’s National Water Company Increases Water Storage

    In 2012 the National Water Company (NWC) of Saudi Arabia undertook the enormous project of developing 43 wells and 46 water purification stations in 27 separate locations to provide sustainable potable water systems near Riyadh. To accomplish this task in a short six-month timeframe, contractors around the world were brought in to provide the necessary pieces of infrastructure required to build ...


    By CST Industries Inc

  • All That You Need to Know About Metal Fabricated Pressure Vessels

    Think of the balloon that sometimes bursts out with a noise while being blown at. We at once know that it bursts out as it fails to withstand the excess pressure. However, for obvious reasons we cannot expect the same out of metal fabricated pressure vessels that are used for numerous industrial applications in factories, plants and manufacturing sites. There are several factors that need to be ...


  • Fabric Furniture Cleaning Machines for Spotlessly Clean, Odor-Free Upholstery

    A well-used couch gathers more dirt than people realize. Impurities residing behind the cushions and on the armrests may not be visible to the unaided eye; but they are there, causing odors, disease, and damage to the fabric itself. Fabric furniture cleaning machines are best for removing dirt from upholstered furniture. These machines are low flow, easy to use, have hot and cold water wash ...


    By Daimer Industries Inc.

  • Excavation, Segregation And Pre-Treatment Works At Town Gasworks – North Wales

    Former gasworks in sensitive town centre location with adjacent commercial and residential properties Redevelopment for commercial use as multi- storey car park, with basement Space constrained excavation area (0.4 ha) requiring detailed site management plans Works complicated by culverted watercourse, residual tar filled tanks, below ground gas ...


    By QDS Environmental Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you