precious metal recycling industry Articles

  • E-scrap: metals too precious to ignore

    Increased recovery of waste electrical and electronic equipment (WEEE) is providing the global recycling industry with fresh challenges. Researchers from Berlin’s University of Technology have been taking a close look at the material flowing into and out of the recycling process, paying special attention to the precious metals content. Their main conclusion is that conventional sorting ...


    By Recycling International

  • Recovery of Precious Metal Catalysts - A New Process Using Supercritical Water Oxidation

    Up to now, the recovery of precious metals used as catalysts in chemical processes has involved the use of incineration. Now, however, a British-Swedish joint venture has developed a process which uses supercritical water oxidation instead, which provides many economic and environmental advantages. Precious metals are used extensively in catalysts in a wide range of industrial chemical processes. ...

  • WEEE – aren’t materials too precious to lose?

    Chris Oldfield, managing director of UNTHA UK, was interviewed by leading journal MRW magazine recently, on the subject of WEEE. Drawing upon his specialist industry insight he commented on the methodology used to process WEEE and the extent to which the sector needs to go ‘back to basics’ to ensure precious materials are not lost. Conversation surrounding recyclate quality has ...


    By UNTHA UK LTD

  • Wastewater Metals Removal

    Industrial Wastewater Treatment Success Stories Wastewater Treatment Metals Removal Ton Nerve Gas Agent Container Rinse Waters ...


    By Integrated Engineers Inc.

  • Pioneers within WEEE recycling

    In a scrap yard in Switzerland right in the middle of the beautiful Alps you can find one of Eldan Recycling’s most cherished and faithful customers – Cablofer Recycling SA. Cablofer was actually one of the first companies within the WEEE-recycling industry. Cablofer Recycling SA is a scrap metal processor dealing with ferrous and non-ferrous scrap on a 40'000 m2 plot in Switzerland. ...


    By Eldan Recycling A/S

  • Is it time to recycle more nickel?

    Now you might think me a little sad, but I have to confess that as a metallurgist, I always find it interesting just how closely the history of mankind is linked to advances in metal working. The first evidence of metal working in Europe dates from around 5500 BC with the extraction of copper, lead and precious metals and this was followed by the working of bronze from around 4000 BC, both of ...

  • Materials flow of platinum group metals in Germany

    Platinum group metals have become indispensable in modern industrial society and the demand for PGMs has greatly increased. An in-depth quantitative analysis of PGM applications, lifecycle structure, deficits and optimisation potential in Germany has been carried out by Umicore Precious Metals Refining and Oko-Institute. Besides detailed insights into one of the more opaque metal markets, the ...


    By Inderscience Publishers

  • New Recycling Era for NYC

    Untitled Document New 20-year contract between the city and large-scale recycler ...


    By BioCycle Magazine

  • E-waste Recycling- Compliance or Necessity

    The era of unorganised recycling of e-waste “formally” ended on 30th April, 2012 in India. With the rise of sun of 1st May, 2012, India joined the club of advanced countries committed for organised recycling of electronic waste. Concerns associated with unorganised recycling: I would like to first of all thank Kabadies (a commonly used terminology ...


    By Eco Recycling Ltd

  • More circular economy: How end-of-life vehicle recycling can be improved

    The circular economy package adopted by the European Commission contains numerous measures aimed at promoting resource efficiency and recycling in the EU. Industry representatives are convinced that the recycling of end-of-life vehicles will also benefit from the package. "The measures planned by the European Commission in the field of design and innovation for the circular economy will ...

  • Lead and Zinc Smelting Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • New study identifies India`s e-waste potential

    The Electronics Industry Association of India ELCINA announced the findings of their study on status and potential of e-waste management in India, conducted with support from DSIR (Department of Scientific and Industrial Research), Ministry of Science and Technology under their Technology Management Programme. The Study was released at a National Conference on E-Waste organised at Pragati Maidan, ...


    By Eco Recycling Ltd

  • E-waste problem: beyond CSR

    A lot has been talked about the problems associated with the end of life electrical & electronic equipment or (e-waste). Now, the time has come to aggressively implement effective and environment friendly solution to address this ever growing problem. As we all know, that e-waste has unique combination of hazardous substances and reusable commodities and therefore it is important from ...


    By Eco Recycling Ltd

  • We Created the Technosphere, but is it the Birth Place of the Circular Economy

    Human activity has created the ‘technosphere’, a landscape which is composed of the materials we have developed, created and thrown away. Far from being a miserable landscape that may initially come to mind, like the desolate garbage filled scene in WALL-E, it could actually be the basis on which we can create a more sustainable way of managing our resources. Just like we have ...

  • Electronic Waste: The Rich Resource in the Urban Mine

    Forgetting your mobile phone can be a real pain, playing on your mind during the day. Then as you think you can feel your phone vibrating in your pocket and you come to realise how dependent we are on our gadgets. Electrical equipment has changed our lives completely and we rely on phones, microwaves, TVs, kettles, computers to keep us informed, entertained and even alive. It is hard to imagine ...

  • Increased demand for XRF analyser hire

    Steve Drake, NDT Market Manager at Ashtead Technology believes that XRF is one of the most important technologies in the company’s fleet of NDT and environmental testing instruments. “With a small amount of training, almost anyone can implement detailed inspections in a wide variety of applications, and with most instruments being lightweight and robust, XRF analysers are among the ...


    By Ashtead Technology Ltd

  • Used to Useful

    Thanks to Mother Earth for giving us millions of tons of natural resources for our need & greed. After extraction & converting these resources in to products for our requirement, we forget to pay attention to recycle the used products but continue to extract afresh as if, nature has no right to say no. In the process, we attract natural calamities (natural recycling) to balance the ...


    By Eco Recycling Ltd

  • Ten top tips to achieve zero liquid discharge production

    Sustainability is the hot topic of our time. In a world of dwindling natural resources, taking environmental responsibility is absolutely essential. That’s why it is up to companies to take responsibility for operating in a sustainable manner. Modern wastewater processing systems allow industrial companies to re-use their treated wastewater in production. Read the top ten tips for the ...


    By H2O GmbH

  • Ideally, data should end up in the shredder - Case Study

    When new computers are needed, companies often need to delete sensitive data reliably from many thousands of old computers - a time-consuming job. Thanks to the HDS 230 hard drive shredder from HSM, Uriel Papierrohstoffe GmbH in Diez (Limburg) can provide their customers with fast and extremely secure data deletion by mechanically shredding hard drives into many particles. Andreas Uriel, the ...


    By HSM GmbH + Co. KG

  • Ideally, data should end up in the shredder - Case Study

    When new computers are needed, companies often need to delete sensitive data reliably from many thousands of old computers - a time-consuming job. Thanks to the HDS 230 hard drive shredder from HSM, Uriel Papierrohstoffe GmbH in Diez (Limburg) can provide their customers with fast and extremely secure data deletion by mechanically shredding hard drives into many particles. Andreas ...


    By HSM GmbH + Co. KG

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you