precise pipe location Articles

  • GPR goes underground: Pipe Penetrating Radar

    Abstract: Pipe Penetrating Radar (PPR) is the underground in-pipe application of ground penetrating radar (GPR) either robotically or by manned entry to reveal wall thickness, delamination, voids, and other conditions that enable more precise determination of pipeline integrity and verifications for trenchless technology rehabilitation. PPR, when applied to pipe-bursting applications, can ...


    By SewerVUE

  • Reasons to choose Trenchless Pipe Bursting Repairing Equipment

    Trenchless technology has altered the industry, revolutionizing sewer pipe repair and gaining the favor of many property owners today. No digging, no re-landscaping, no use of chemicals- the trenchless strategy is far better than the traditional approach. In the developing business sector, pipe repair companies need the most effective equipment to stay competitive. The ...


    By TRIC Tools Inc.

  • Transient tests for locating and sizing illegal branches in pipe systems

    In pipe systems illegal branches can take away remarkable water resources with negative effects from both the economic and technical points of view. Difficulties in pointing out illegal branches by means of steady-state pressure and discharge measurements are mainly due to the fact that, of course, such systems are not active according to a regular time schedule. In this paper the possibility of ...


    By IWA Publishing

  • World`s Largest Pipe Contract Awarded to Fabricated Plastics for Expansion of Petrochemical Complex in Texas

    When Fabricated Plastics Limited of Maple, Ont., was given the contract to supply all the piping required for the expansion of a plastics resin plant in southern Texas, it proved to be the largest single pipe contract ever awarded. In terms of variety of pipe and chemical service requirements, it was also one of the most complicated and demanding, with different molded laminates and pipe lining ...


    By Fabricated Plastics Limited

  • Wastewater force main management – internal corrosion survey using inline methods

    In our first post about Wastewater Force Main Management, we looked at how preliminary analysis helps operators develop a plan for managing their system. After completing this process, operators can begin putting the plan into action with preliminary surveys on specific force mains. For those at WEFTEC, you can visit Pure ...


    By Pure Technologies

  • Reducing Ruptured Reputations – Assessment Tools Reduce Risk of Failure on Sewer Force Mains

    A ruptured sewer pipe can attract a lot of unwanted attention, even when it happens on private property. Last year, hours before celebrities were to arrive at the Golden Globes Awards show at the Beverley Hills Hotel, a reputed sewer pipe burst, spewing a mess of wastewater on the red ...


    By Pure Technologies

  • Preventing rain water flooding case study

    SmartScan 50 helps preventing rain water flooding by providing an efficient level measurement solution in a pop. 1M city. The municipality has been struggling for years with heavy flooding of rain water during winter time that damaged large parts of the city and caused distress to its residents. As a result, a long drainage pipe was laid between the city's shore and the flooded parts. This huge ...

  • Advanced Enviro-Septic™ Systems Achieve Even Distribution without Pressure Dosing

    Abstract: Advanced Enviro-Septic™ Systems (AES) do not use pressure distribution. Pumps are used only if necessary to gain elevation to the treatment field. Pressure distribution has the potential to disrupt the settling of solids within the pipe. Testing has confirmed that AES achieves even distribution throughout the system naturally, through the development of a controlled bacterial ...

  • Wastewater Force Main Management – Internal Corrosion Survey using inline methods

    In our first post about Wastewater Force Main Management, we looked at how preliminary analysis helps operators develop a plan for managing their system. After completing this process, operators can begin putting the plan into action with preliminary surveys on specific force mains. For those at WEFTEC, you can visit Pure ...


    By Pure Technologies

  • Bollard Installation

    Sustained health and safety of the human population requires that remediation systems be set up to take care of high levels of contaminants in water bodies, soil groundwater or other locations as deemed fit. Environmental construction companies are frequently called up on for this purpose. Need for Bollard InstallationExecution of the remediation strategy may involve excavation, concrete coring, ...

  • Measuring Pressure and Vacuum Correctly

    Pumps and systems are installed, started, operated, and many times, forgotten. When a problem arises, it’s recommended to install a discharge pressure gauge and suction vacuum gauge on the system. These gauges should be installed near the suction inlet and discharge outlet of the pump. These gauges are usually installed properly, recorded, and along with a pump speed measurement can be ...


    By Gorman-Rupp Co.

  • Case study - New N2O monitor for occupational health and safety

    The new Geotech G200 range of N2O analysers measures N2O at 0-1000ppm or at 0-100 percent with accuracy, speed and ease-of-use.  With options for CO2, O2 and CO, the G200 range can assist anaesthetists and ...


    By Geotech

  • Mini PipeDiver first: Milwaukee region uses electromagnetic technology on metallic force main inspection

    Milwaukee is a water hub, and not just because of its location along the shores of Lake Michigan, which holds 4.3 percent of the world’s supply of fresh drinking water. The City also boasts of global leadership in water technology, having won a U.S. Water Prize for innovative watershed-based approaches toward water sustainability. The City takes ...


    By Pure Technologies

  • When Speed and Accuracy Count: Enwave Houston and Oklahoma City Successfully Deploy Sahara Tool for Leak Inspection Projects in Record Time

    Sahara technology is winning accolades from satisfied owners and operators of buried infrastructure the world over. In North America, two recent projects demonstrate the benefits of using this in-line tethered tool for critical leak detection surveys, especially when speed and accuracy are paramount. ...


    By Pure Technologies

  • Tackling Non-Revenue Water by Identifying Small Leaks

    Small leaks sink big ships – the same can be said for large-diameter pipes in utility networks. While large leaks or ruptures are seen as newsworthy stories accompanied by images of water flowing down the streets; smaller leaks can often be more devastating. Left undetected, they can add up over time, contributing significantly to ...


    By Pure Technologies

  • Safety expertise in extreme environments

    Emergency safety showers are the first line of defence in the event of chemical spills and accidents in industry and a wide range of products has evolved to accommodate specific hazards. Meeting the needs of companies operating in extreme environments can be particularly challenging for the specialist suppliers of this vital equipment. Workers in the oil and gas industry frequently face extreme ...


    By Hughes Safety Showers

  • Case study - The Philadelphia Water Department (PWD)

    Service: Sahara Leak Detection Client: The Philadelphia Water Department (PWD) Project Date: 2007 Type of Pipelines: Transmission Mains Diameter: 16 to 60-inch Pipe Material: Cast Iron Dutile Iron Steel Length: 22.2 miles Results: 47+ leaks identified The Philadelphia Water Department (PWD) has focused on water loss management programs for the past decade ...


    By Pure Technologies

  • Metropolitana milanese reduces water loss on critical steel pipeline

    Assessing the condition of buried water infrastructure can yield a variety of outcomes that are difficult to predict. Sometimes, they even seem random. The common belief that the age of a pipe determines its condition is rarely correct – in many cases, a newer main can be in worse condition than one twice or three times as old. Instead, operational, environmental and installation factors ...


    By Pure Technologies

  • Paint booths, or areas using combustible gases: why a requirement for combustible gas monitor might be necessary

    Paint booths save time and ensure a smooth and professional application of paint in a range of industries, including automotive, aerospace, home decor, furniture, and more. Combustible gases and fluids in the paint booth environment can pose a health hazard if something goes wrong. Explore the hidden dangers of paint booth fluids and gases, and learn how a ...

  • Expect The Unexpected During Inline Inspection Runs

    Over the past decade, several high profile oil and gas pipeline failures have shown that the consequences of a rupture can be extremely severe for both the environment and human life, and can result in billions of dollars in remediation costs. Because of all these negative consequences, governments have made it mandatory to conduct routine inspections on these assets to prevent catastrophic ...


    By Pure Technologies

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you