precision laboratory equipment manufacturer Articles

  • Sample Handling Strategies for Accurate Lead-In-Soil Measurements in the Field and Laboratory

    ABSTRACT The inhomogenous lead-in-soil matrix can present serious obstacles to accurate sample collection and handling. In typical lead-in-soil measurement, particle size related errors in sampling and sample handling often exceed all other sources of error. The magnitude of error can vary widely depending on the particulate nature of the lead contaminant and the effectiveness of control ...

  • Pharmaceutical glass manufacturer blends 120 batches/day of abrasive ingredients

    The manufacture of high-quality pharmaceutical glass is an exacting business that calls for careful control at all stages of the process in order to obtain the desired properties in the final product. Those properties vary, depending on what the glass is to be used for, so the initial step - the precise measurement and thorough mixing of multiple ingredients - is critical to the rest of the ...

  • Procedure for calibration of micropipettors

    PURPOSE: Good Laboratory Practice dictates that all equipment used for the generation, measurement or assessment of data shall be adequately tested, calibrated and/or standardized. A procedure describing a pipettor calibration method, records of test performance and repairs should be available for laboratory personnel. This procedure describes a method for evaluating the accuracy and ...


  • Recommendations for Implementing a Calibration Program

    Introduction This article is limited to the principles of organization for calibration work in relation to cGMP and other pharmaceutical standards. Calibration and metrology methods related to actual calibration techniques, statistics, and theories are not explored in our discussions.1 Each class of instruments requires specific techniques and approaches to achieve stated accuracies. All ...


    By Prime Technologies, Inc.

  • TopAir’s Weighing Station

    TopAir is the flagship brand of Statitech Ltd., an ISO 9002 certified manufacturer of cleanroom products for the electronic, semi-conductor, biomedical and defense industries. Established in 1999 and ISO-9002 certified, Statitech Ltd. specializes in the development, production and marketing of a wide variety of standard and custom-made cleanroom products including a weighing station, and has ...


    By TopAir Systems

  • TopAir`s Laminar Bench

    TopAir is the flagship brand of Statitech Ltd., a leading manufacturer of cleanroom products since 1999. One of TopAir’s premier product lines includes the laminar bench. The laminar bench is a combination stainless steel worktop that provides a smooth, clean surface and an overhead airflow/filter system that removes unacceptable particles from the air before they reach the work area. ...


    By TopAir Systems

  • Hired metals analyser ensures remediation success

    Cognition Land and Water Ltd, a UK based remediation specialist, has hired a portable XRF metals analyser to improve the speed of remediation work at a project in London’s Kentish Town. The project had a major impact on local residents so timescales were extremely tight but Cognition’s Charlie Jarvis says “It would not have been possible to meet the deadline without the use of ...


    By Ashtead Technology Ltd

  • Performance-Based Measurement Systems

    Many of the Environmental Protection Agency's (EPA's) methods used to monitor air, water and soil for environmental contaminants prescribe step-by-step details on how the chemical analysis must be conducted and prohibit any deviations or variations. The EPA has recognized that monitoring equipment and technology have improved tremendously over the last few years; that environmental media do not ...


    By WSP | Parsons Brinckerhoff

  • Highland Tank 50,000 Gallon Oil/Water Separator installed at Con Ed Mott Haven Power Distribution Center

    Before the Brooklyn Bridge spanned the East River, before the Statue of Liberty first graced New York Harbor, and before skyscrapers rose above New York City's streets, the utility companies that would eventually become Con Edison were already building the energy infrastructure needed to fuel and sustain the city's growth. Today, Con Edison operates one of the largest and most complex — yet ...

  • Transducers – “A lifetime of quality”

    At Brüel & Kjær, transducers are a core part of our business. They have been for more than50 years – almost a lifetime! The quality of our transducers is world-renowned. It is the result of our unique experience and knowledge, backed up by meticulous testing and quality control. Experience, Knowledge and Innovation Our experience and knowledge, acquired over ...

  • Offshore water injection

    Client: PPCoN   Location: North Sea Description: UV disinfection of seawater for offshore reservoir injection The process of disinfecting water with UV light is a proven technology for drinking and process water in many industries. It has now been applied with great success to the disinfection of seawater for use well injection ...


    By atg UV Technology

  • ESTECH Corporation - engineering solutions and technology

    20 Years of Success and a New Facility On 1 September 2009, ESTECH Corporation (in Japanese, Kabushiki Kaisha ESTECH) Engineering Solutions & Technologies opened the doors of its new testing facility, and at the same time celebrated 20 years since its inception in 1989. Situated less than 20 km from Yokohama and 40 km from the centre of Tokyo, the two storey, 670m2 test facility ...

  • Future inside – smart environmental sensing technology

    SHM30 snow depth sensor in Antarctica (photo: Alfred-Wegener-Institut, Helmholtz-Zentrum Bremerhaven) A lot of sensing technologies have changed recently: Ultrasonic wind measurement replaces cups and vane systems, closed anemometer designs offer better protection from ...

  • Advanced Water Quality Techniques Course

    Abstract:The development of a strategic water quality monitoring program is based on prioritizing risks to public safety and economic reality. The development of global standardized methods and protocols for automated water quality monitoring would facilitate international communication of water quality information and comparison of standardized methods and protocols. The three primary methods ...


  • High output of quality flavors demands efficient grinding

    Vanilla beans from Madagascar, cinnamon bark from Sri Lanka, ginger roots from Nigeria and many other natural flavors you enjoy have likely come from Givaudan Flavors Corp. which extracts flavor from natural products, concentrates it, packages and markets it to food and beverage manufacturers. Givaudan processes natural ingredients on a mass scale, placing high demands on its size reduction ...

  • ”Catalytic VOC oxidation has been an excellent VOC elimination method in our paint plant”, Pekka Kotilainen, Environmental Manager, Tikkurila Oyj, FIN

    Tikkurila has been succesfully treating VOC emissions in paint production with catalytic VOC incinerator for years For already 17 years, Tikkurila has been treating the VOC emissions in Finland’s paint production plant with the first regenerative catalytic VOC oxidizer on the market. Catalytic incineration has proven to be a very applicable, easy and effective way to respond to ...


  • Bringing powdered metal blending in-house, rotary-style

    When processing powdered metal compounds for products such as gyro rotors, flywheels, counterbalances, boring bars and grinding quills, the proportion of powdered metal ingredients must be precise, and the distribution of those ingredients 100 percent uniform. Mi-Tech Metals, Indianapolis, IN, has been manufacturing products from high-density tungsten-based alloys for more than 26 years, during ...

  • Tech update: Plant instrumentation - food engineering

    Sensors and other devices are the foot soldiers in automation architecture, but most food and beverage manufacturers still are looking for full value. You know an equipment category has arrived when it starts getting its own industry-specific center. For the food production sensors that do the heavy lifting in instrumentation technology, that day could arrive earlier rather than ...


    By Hardy Process Solutions

  • Stellio heliostat set to cut CSP tower costs by 20%

    A new heliostat modeled on South African data is using a pentagonal reflector design, innovative construction techniques and smart software to boost the cost efficiency of tower plants. Heliostat fields typically contribute about 50% of the capital investment for CSP tower plants, according to a study by SBP Sonne, the German engineering firm which has ...


    By FCBI Energy

  • The challenges and benefits of local air quality monitoring

    A new generation of air quality monitors is now being offered to provide localised, real-time air quality readings – but the potential benefit is only just starting to be realised. It is generally accepted that whilst measurements from air quality reference stations are highly accurate, they are not sufficiently location-specific. Key pollutants – such as NO2 and PM2.5 ...


    By AQMesh

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you